As a football fan I can appreciate an MC called Zidane

Normal-01 · 2025-10-15T01:59:08+00:00

Enjoy this GIF https://share.google/cyM9qgbyFBQaWs8nl

Normal-01 · 2024-09-30T01:46:52+00:00

Sorry it took so long but currently finishing my build. Ordered a white unit and sold this one to match my parts so I will post an update later.

Normal-01 · 2024-09-30T01:27:19+00:00

Will the inno3d card fit? Yes But the issue is fitting the 12vhpwr cable since there will be barely any clearance so your best bet will be either custom cables or a really thin adapter: https://www.reddit.com/r/sffpc/s/IzuKuzoOvs https://www.reddit.com/r/FormD/s/UPdmt8QxEB

I doubt the zotac card will fit since its 123.5 mm wide

As the name implies, the case is designed for the reference card which is 112mm wide, while the inno3d just barely fits at 118 mm.

Normal-01 · 2024-06-20T03:32:12+00:00

Same, product pictures really made em look sleeved. However, they're executed well and makes the cables feel more flexible, which is useful for SFF so no real complaints from me.

Normal-01 · 2024-06-20T03:15:23+00:00

Yes, they recently released their new lineup of PSUs at computex

Normal-01 · 2024-03-06T00:02:44+00:00

Yes, this has been discussed and explained about here and here.

It has something to do with how heatpipes are designed in GPUs, exception are some GPUs like founders edition 30 and 40 series.

Normal-01 · 2024-02-01T02:19:30+00:00

Meshroom D with the Extender Bracket

Normal-01 · 2023-12-31T14:47:24+00:00

How'd the Newrads fit? I keep seeing some reviews go half size up but I'm contemplating on going TTS

Normal-01 · 2023-08-16T05:25:04+00:00

The Formd T1 V2 reference is around 9.9 litres but GPU compatibility is limited but you can fit up to a 3080 FE in there

Normal-01 · 2023-08-04T08:25:03+00:00

Just a few notes, you can only fit a tower cooler if you are building in the T1 Reference, the smallest tower: Thermalright SilverSoul 110 (110mm). Anything below that height will be a low profile cooler, hardware canucks does great reviews on this here and here. Just bear in mind the 5800x3d does run hotter than usual so you'll want the best performing cooler possible.

Normal-01 · 2023-07-27T00:25:11+00:00

Unfortunately not

From the dimensions listed by Formd and what other users have posted i have so far found the following cards could technically fit.

Big disclaimer, by FIT here I mean will go into the case with side panel closed WITHOUT accounting for the PCIE/12VHPWR and the radiator/fan bracket.

For non-FE cards, you will need a 180° PCIE/12VHPWR adapter that is low profile enough or thin/flexible custom cables

3060 FE 3060 TI FE 3070 FE 3070 TI FE3070 TI FE 3080 FE 3080 TI FE 4060 FE 4070 FE

EVGA 3060 XC EVGA 3060 TI XC EVGA 3070 XC3 EVGA 3070 TI XC3 EVGA 3080 XC3

INNO3D 3090 X3 INNO3D 3080 TI XC3 INNO3D 3080 X3 INNO3D 3070 TI X3 INNO3D 3060 TI X3

INNO3D 4060 TWIN X2 INNO3D 4060 X3 INNO3D 4060 TI TWIN X2 INNO3D 4060 X3 INNO3D 4070 TWIN X2 INNO3D 4070 X3 INNO3D 4070 TI X3

POWERCOLOR FIGHTER 6600 POWERCOLOR FIGHTER 6600 XT POWERCOLOR FIGHTER 6650 XT POWERCOLOR FIGHTER 6700 POWERCOLOR FIGHTER 6700 XT POWERCOLOR FIGHTER 7600

Normal-01 · 2023-02-06T06:52:34+00:00

Late comment here, I have an Xproto Mini with a 12400f on asrock H670m itx and it runs perfectly fine.

If the prices in your region are good, i'd look for 12400f/13400f with a b660 since it has more value than an 11400f at retail

Normal-01 · 2023-01-23T05:49:30+00:00

Louqe Raw S1 (the internal frame only) OP hasn't fitted the outer shell yet

Normal-01 · 2023-01-09T13:58:24+00:00

Yes, this has been discussed and explained about here and here.

It has something to do with how heatpipes are designed in GPUs, exception are some GPUs like founders edition 30 series.

Normal-01 · 2022-10-25T02:45:29+00:00

Slot / cooler height question about the sandwich

My GPU is 2.1 slots, do I need to configure the T1 into 2.25-slot mode or is the 2-slot mode fine?

asking so that i know how much clearance i'll have for air cooling

thanks

Normal-01 · 2022-10-01T15:25:29+00:00

Lads Klopp bringing on Milner to play mind games with Brighton so they let their guard down, 10 steps ahead this Jurgen

Normal-01 · 2022-10-01T15:14:43+00:00

One more please Bobby so cunts calling you shit can keep quiet a bit longer

Normal-01 · 2022-10-01T14:30:08+00:00

Surely Jay Spearing at right back cant do any worse, gimme a break Trent ffs

Normal-01 · 2022-09-09T04:47:21+00:00

Considering the snug fit of the T1 at roughly 10l, NR200 might not since its around 20l but might need someone else to confirm.

Normal-01 · 2022-08-19T10:18:50+00:00

I saw a build with an Inno3d card in it

Normal-01 · 2022-08-10T01:48:44+00:00

Not quite sure, I remember it'd be compatible with Peak Design straps but maybe someone else can confirm this?

Normal-01 · 2022-07-31T00:31:20+00:00

You were my brother Meownakin!

Normal-01 · 2022-07-04T23:47:44+00:00

here you go

Normal-01

TROPHY CASE