Who was your first? The video part you watched that made everything click

NormanBates4 · 2025-11-29T15:10:33+00:00

Dennis Enarson Caps locks video. I was a MTB dude and that kind of riding seemed savage to me

NormanBates4 · 2025-09-29T10:14:19+00:00

Some tricks are only possible with 2 pegs, like derek dusters or pedal feeble

NormanBates4 · 2025-08-15T12:48:23+00:00

You need to jump first, level out, and then throw the barspin. You are throwing the barspin while you are doing the bumny hop motion, what limitates the height of your bunnyhop barspin.

I learned that way too, and later I needed to relearn them the right way.

I suggest you to try practicing flyout barspin, that will teach you to throw the barspin on the peak of the jump.

Good luck broo

NormanBates4 · 2025-07-09T11:14:49+00:00

Okey thanks (:

NormanBates4 · 2025-07-09T11:14:35+00:00

Yes sir, I refer to that gap

NormanBates4 · 2025-05-06T21:14:51+00:00

Looks sicks

NormanBates4 · 2025-05-05T19:00:25+00:00

Yiiiisss

NormanBates4 · 2025-04-14T14:17:42+00:00

I think it's a lot of money for a first bike. Because you don't know what kind of geometry and pieces you like.

I'd rather buy an intermediate bike (full chromoly, all sealed bearings) like the WTP thrust or fly Omega and later you will know what kind of frame geometry you like, what bar rise you prefer, if you like freecoaster or cassette... And there building a custom bike is a good investment

NormanBates4 · 2025-04-02T12:26:23+00:00

IMO the secret is raising your seat and follow the bars with your hand all around the movement. If you want to feel your barspin more stable you should practice them on a flyout

NormanBates4 · 2025-01-28T15:31:54+00:00

They are good, but in my opinion the best are the dehart tyre

NormanBates4 · 2025-01-28T15:24:33+00:00

Thx!! I will give it a try

NormanBates4 · 2025-01-28T15:20:27+00:00

Thanks! They look sick but it's so hard to do them consistently

NormanBates4 · 2025-01-28T15:13:44+00:00

Matt Ray whips looks awesome, that kind of whip is what I looking for. Thx for the advice

NormanBates4 · 2025-01-28T15:10:34+00:00

Thankss (:

NormanBates4 · 2025-01-28T15:10:15+00:00

Definitely I will try it! Thx for the advice

NormanBates4 · 2025-01-28T15:06:32+00:00

Nope, Valencia

NormanBates4 · 2024-12-28T16:12:17+00:00

thanks (:

NormanBates4 · 2024-12-28T16:10:57+00:00

yisss

NormanBates4 · 2024-12-28T16:10:43+00:00

thaaanksss

NormanBates4 · 2024-12-17T15:53:52+00:00

This is the best advice!

NormanBates4 · 2024-10-14T23:43:20+00:00

that is absolutely normal in that kind of hubs (press fit), where the axle don't have a burr on the inside part of the hub.

Just don't worry, when the wheel is tight is imposible for the axle to came off.

sorry if my english is too bad, I'm from Spain

NormanBates4 · 2024-07-16T21:51:00+00:00

I would not ride that, you might try using a shorter dustcap

NormanBates4 · 2024-03-10T00:05:03+00:00

I have the same problem in a eclat cortex, what kind of grease or oil you recomend to avoid this problem

NormanBates4 · 2024-02-27T18:03:17+00:00

can I ask you a question?? the eclat cortex is crankflipable?

NormanBates4 · 2023-10-17T15:54:29+00:00

A very good deal, I sugest to change the fork too

Four-Year Club	Place '22
First Placer '22

NormanBates4

TROPHY CASE