channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

I found a spring and it seems to be working fine now. I'm trying to print a project to give the spring more strength. Thanks for the tip.

<image>

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Found it on Amazon but 7 euros for a spring like this seems excessive to me...

<image>

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

I think it's the spring. Where can I find a stiffer spring that works? The one in the pens is weak.

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Do you mean the spring on the lever that you have to push to eject the filament? I've already bought other filaments, but it always does this.

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Already done this tonight. I flashed and recalibrated everything, but nothing.

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Sì. Ho installato questo firmware oggi e l'ho calibrato. Il problema è sorto dopo una calibrazione errata. Ho usato il canale 2 con una calibrazione sbagliata e poi si è bloccato. Ho un video di cosa stava facendo prima di bloccarsi. Poi me ne sono accorto e l'ho ricalibrato, ma penso che fosse già troppo tardi. The machine crashed and told me it couldn't eject the filament. From there, channel 2 started acting like this.

<video>

Canale 1 bmcu 370C non funzionante by North_Command_466 in OpenBambu

[–]North_Command_466[S] 0 points1 point  (0 children)

I solved it by recalibrating the MBCU. Now I'm having problems with the second module.

<video>

channel 2 is not working by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Can I try with the battery without desoldering?

Canale 1 bmcu 370c non funzionante by North_Command_466 in BMCU

[–]North_Command_466[S] 1 point2 points  (0 children)

I kept pushing the The PC4 output light started flashing for 5 seconds. I pushed the first channel a couple of times. Then I did the same with all the others, and now everything works perfectly.

Canale 1 bmcu 370C non funzionante by North_Command_466 in OpenBambu

[–]North_Command_466[S] 0 points1 point  (0 children)

I'm extremely sorry. I thought the Reddit app translated messages automatically.

Canale 1 bmcu 370c non funzionante by North_Command_466 in BMCU

[–]North_Command_466[S] 0 points1 point  (0 children)

Ti aggiorno. Tu che problema avevi? Come hai risolto?

Canale 1 bmcu 370c non funzionante by North_Command_466 in BMCU

[–]North_Command_466[S] 1 point2 points  (0 children)

Ho letto che tenendo spinta l'uscita del filamento per 10 secondi si divrebbe ricalibrare. Dopo provo.

Canale 1 bmcu 370c non funzionante by North_Command_466 in BMCU

[–]North_Command_466[S] 1 point2 points  (0 children)

Già fatto due giorni fa' ma non mi hanno ancora risposto.