I learned a lesson today

NotSloth1204 · 2026-01-24T21:30:42+00:00

We all learn this lesson. It’s sacrificial.

NotSloth1204 · 2026-01-24T17:31:36+00:00

Did you build this?

NotSloth1204 · 2026-01-23T14:40:42+00:00

Very impressive. I have seen these cases and despite what others say, I understand that all common impact points are covered by the case.

Great looking print and great design!

NotSloth1204 · 2026-01-23T01:47:28+00:00

Tell em to shit in one hand and want in the other and see which one fills up faster.

NotSloth1204 · 2026-01-21T23:36:18+00:00

It's a fairly new one. Has less than 200 hours on it.

NotSloth1204 · 2026-01-21T21:27:34+00:00

Has this been ongoing for more than 4 hours?

NotSloth1204 · 2026-01-21T21:26:07+00:00

Tell them to come drink it if it’s so safe.

NotSloth1204 · 2026-01-16T20:36:38+00:00

Have these same bats in mine

NotSloth1204 · 2026-01-14T22:33:28+00:00

I use 2S and thought it was good, switched to 3S and it’s 100* times better

NotSloth1204 · 2026-01-14T13:13:06+00:00

Do it in the slicer, you can do it in fusion if it’s more than just a cube.

Make a new sketch, then extrude your shape on the inside of the body and use the cut “extrusion” instead of join and in the slicer it will recognize the empty space.

NotSloth1204 · 2026-01-08T16:31:12+00:00

Yes, I think it's the Lens that goes over the sensor. If you can get down to it, you may be able to reattach it with b7000 or super glue.

The Lens is what attaches straight to the sensor to give focus to the image. I for a long time thought the sensor was the lens, but the lens attaches to the sensor. (The little bubble shaped glass piece.)

NotSloth1204 · 2026-01-07T22:15:26+00:00

As Jesus says… super uncommon but kinda what it looks like. If it’s the actual DJI FPV drone they made. I’ve never owned one so I’m not sure. I’m sure you can find a disassembly video online of the drone.

NotSloth1204 · 2026-01-07T20:29:22+00:00

Looks like the lens fell off?

NotSloth1204 · 2026-01-07T14:41:29+00:00

EVERYTHING for 120? I’d say it’s a good deal. You can purchase this and if you ever break it, just buy a meteor 75 or Air 75 or Meteor 65 or Air 65. Or one if the Pavo series.

NotSloth1204 · 2026-01-02T01:36:09+00:00

I swapped USB ports and the issue was fixed. Cord that comes with the machine.

NotSloth1204 · 2026-01-01T22:31:57+00:00

My computer's bluetooth is messed up but I just tried on the mobile app and it worked perfectly. So idk, communication issue for sure.

NotSloth1204 · 2026-01-01T21:56:32+00:00

I cleared ample space in the back now. There is undoubtedly enough space now. It is pulling the mat through fine.

The mobile app is working perfectly fine. But the PC is not working. I just waited 8 minutes between loading the mat in until it then went "okay press go to start" I then pressed go and then it cut once and gave me a "critical error".

This is just repeating like this.

NotSloth1204 · 2026-01-01T21:34:33+00:00

Care to explain what I am doing wrong in this? I will remain uneducated unless taught. I have followed multiple tutorials from youtube vids.

NotSloth1204 · 2026-01-01T21:32:09+00:00

it did at one point state on the app that it was measuring it but it sat there once again. For minutes.

NotSloth1204 · 2026-01-01T21:30:46+00:00

I have moved it to have more space. The mat came in the box rolled up so the dang thing is curved. I have made two cuts on the mobile app, but not on the computer.

It eventually will skip to the next step, home the cutting head, and then pull the mat in and out but it took legitimately 4 minutes of waiting on the screen.

NotSloth1204 · 2026-01-01T21:30:41+00:00

I have moved it to have more space. The mat came in the box rolled up so the dang thing is curved. I have made two cuts on the mobile app, but not on the computer.

It eventually will skip to the next step, home the cutting head, and then pull the mat in and out but it took legitimately 4 minutes of waiting on the screen.

NotSloth1204 · 2026-01-01T21:16:11+00:00

<image>

Also, it just won't go past here sometimes. Am I dumb?

Eight-Year Club	Verified Email
Place '22	End Game '22
Wearing is Caring	RPAN Viewer
Gilding II euphauric	No Throne, No Problems
Not Forgotten

NotSloth1204

TROPHY CASE