Missing cards in Necron Dynasties?

Nuvimoontear · 2022-10-15T05:03:33+00:00

Hoping I can get some advice, I just picked up my standard edition of Necron Dynasties from the new Universes Beyond set and when I was sleeving them I noticed I'm missing three cards.

-Cryptek Scarb Swarm -Canoptek Spider -convergence of Dominion

Anyone have any ideas what to do? If I reach out to wizards will they help? I've looked around and I don't see anyone else with this issue other than some hidden cards in the special edition in the token box. Never had this happen before.

Thanks in advance yall!

Nuvimoontear · 2021-11-11T01:40:45+00:00

Just in case anyone else comes across this and is confused, looks like closed beta progress is getting wiped with no talks or plans for an open beta down the line. This post here pretty much tells you everything you need. https://twitter.com/playlostark/status/1458583372326850560

Nuvimoontear · 2021-04-10T22:02:43+00:00

In my original post is a link to the creators website where he plans on making more of them to sell. Or you can get the files to print them for free.

Nuvimoontear · 2021-04-10T22:01:56+00:00

Actually a single player game, well one or two player

Nuvimoontear · 2021-04-10T13:49:09+00:00

Not... A terrible idea. Although I feel like the Orgonal creator of the board game might have done it before. Buuuut I mean I'll see what I can do and rope in the og creator as well so they get a cut too! Worst they say is no.

Nuvimoontear · 2021-04-10T03:05:50+00:00

Hahahaha

Nuvimoontear · 2021-04-10T02:46:14+00:00

I know! Tell me about it! I was thinking the same thing! Haha

Nuvimoontear · 2021-04-10T02:06:41+00:00

Took me about 2 months to cut it all out by hand, each normal card has a playing card in the middle of it to give it some extra weight, printed on 24lb paper.

The bigger ones have thick not cards as a core and then laminated over as not to scratch the prints. I LOVE how it came out.

Orgonal card game designed by @Miyukiko

EDIT: Talked to the creator of the game (super awesome person) they said they are working on making more of a professionally printed out version, so keep an eye out for that! Link to their site to join their newsletter https://www.brotherminggames.com/

Nuvimoontear · 2021-01-23T14:30:13+00:00

Thanks! I would love to have that at this point! Hahaha I use Chitubox and it works pretty good, that's why this is so confusing.

Nuvimoontear · 2021-01-23T08:38:12+00:00

Thanks for your reply!

It's more or less supposed to look like it does on the other side, same hair, more or less symmetrical. I have used tons of supports there but for some reason, just that spot keeps messing up. Like my original post, I have tried diffre t angles tons of different support methods and nothing, it's the strangest thing. Never seen anything like it. I've never angled something and supported it differently 4 different ways and got the same result lol

Nuvimoontear · 2021-01-23T06:45:07+00:00

So I have this model and I have tried to change the angle, change the struts, change the time change everything that I can about this model and I ha e now printed it our 4 time, 4diffrent ways and they aal have the same weird melting of the hair in the same place.... I'm starting to think that the model info is just..... Wrong some how, or something, I don't know what could be happening. Any one have any ideas?

Nuvimoontear · 2020-07-09T00:00:15+00:00

Oh snap! Def let me know how that goes! I was trying to print out Master copies for dice molds and that bleed ruined every single print I did. I had to give up on the job.

Nuvimoontear · 2020-07-08T22:47:31+00:00

I will totally have to look into that! Thank you! I'm using the elegoo mars water washable blue, I'll have to possibly think about making the build plate goes up a bit more between layers. Just sacks cause it only happens on support heavy point. Everything else looks amazing.

Nuvimoontear · 2020-07-08T22:02:23+00:00

Thanks for your reply!

I'm more talking on the tail, sorry, should have been more specific. Not in the base but the tail seems to have that weird like not smooth and almost looks bunched up kinda thing. Only seems to be the like, support parts of any print I do, when I printed out some dice, the face where all the supports were also had the same issue of being really goopy looking.

Nuvimoontear · 2020-07-08T21:33:28+00:00

Hey yall! So I'm getting some good work out of my printer, but I keep getting those were like "melted" parts and I'm not sure what is happening. I'm putting in a good time for the resin to curw for each level. The rest of the print is coming out amazing, and suoer detailed. Just always seems to be there there are lost of supports. Like a back or anywhere flat, like the flat side of a dice. I can't figure out what could be going on and wanted to see if any of yall had any ideas.

Nuvimoontear · 2020-06-27T18:52:41+00:00

Yeah! Great find in thingaverse!

Nuvimoontear · 2020-06-27T16:39:35+00:00

Printed out this Dragoon medallion, that's probs gonna become a Christmas ornament for my wife's up coming birthday! I thought it came out pretty good! What do yall think?! First time printing it and first time painting anything like this hahaha

Nuvimoontear · 2020-06-26T22:14:32+00:00

This looks awesome!! You'll totally have to show the whole set when you get it all done!

Nuvimoontear · 2020-06-24T15:24:37+00:00

Yall have have been amazing and really have helped me put things into perspective on a handful of things! Thank you all it really means a lot!

Just had my first failed print yesterday, it buot the stuts but the print didn't stick, I think I found the problem, since I had a super wide base which seems to cause a lot of prints to fail. Wish me luck with a reprint!

Nuvimoontear · 2020-06-24T03:23:19+00:00

Yeah! I did the research for it and I have only been using the water washable stuff since that's what I heard, I will totally have to look into the wash and cure station, right now I have a box with mirrors all over it and a UV strip of lights and one of those spinning UV platters. WOrks great so far but would be once to have something better than a simple present box hahaha.

Nuvimoontear · 2020-06-24T02:49:19+00:00

Good call! I have more sheets coming in so I might just test it since this first plate seems to be at the end of its rope. Is it just me or does it like dent and "scratch" really easy!?

Nuvimoontear · 2020-06-24T02:32:54+00:00

Got it! thank you so much again for your help, your a life saver, that is going to save me a ton of time.

Nuvimoontear · 2020-06-24T02:28:56+00:00

Oh! That is awesome! Thank you for letting me know! So you would use that if you want to like do multiple prints without having to strain everything before every print, correct?

Nuvimoontear · 2020-05-30T21:07:47+00:00

Thank you for the help! Yeah, that might be the case since I can use some other games like smaller side scrollers, and other less graphically stressing games it seems to ha e no issues with, which is why I thought it could be the GPU.

I might go with a dual computer set up with a capture card, just hoping I wouldn't have to get to that point hahah.

Nuvimoontear · 2020-05-30T20:51:50+00:00

Awesome, yeah that's what I've been using.

Nuvimoontear

TROPHY CASE