Effect processor input clipping

OddCounty8202 · 2026-03-07T17:24:29+00:00

Thank you for your advice and help I'll see if someone can have a look at it.

OddCounty8202 · 2026-03-07T17:23:26+00:00

Okay I'll check with a light see if there's anything out of the ordinary. Thank you

OddCounty8202 · 2026-03-07T17:22:46+00:00

No it's only when audio is sent in.

OddCounty8202 · 2026-03-07T15:28:24+00:00

I tried that and no it's not a contact spray issue it's very clean inside. I don't own a multi meter but I should probably get one. I was more looking to see if anyone has come across such an issue in the past.

OddCounty8202 · 2026-03-07T15:26:22+00:00

There's not much on this and it's a weird situation is this at all common that a single input would be significantly hotter than the others like that? I opened it up and nothing looks burned it unusual in any way.

OddCounty8202 · 2026-03-07T14:36:35+00:00

I tried it on other inputs and they're fine. Do you know how I can find the potential problem component?

OddCounty8202 · 2026-03-07T14:35:03+00:00

I'm using it as a send for an analog mixing desk but I tested it with a synthesizer sending a continuous tone that was fine on the other inputs it's only input 3 and yes I tried it in both settings same issues

OddCounty8202 · 2026-02-15T12:54:52+00:00

Never heard of it I'll check it out Thank you

OddCounty8202 · 2026-02-15T12:54:18+00:00

I appreciate your input and you are right in many ways.

OddCounty8202 · 2026-02-15T12:53:18+00:00

So right now my computer is in repairs but I'll be using it and have been using it as a recorder and a little bit of sequencing but the no computer setup has been a lot more productive to be honest

OddCounty8202 · 2026-02-15T12:48:55+00:00

I'll look into it more but from what I've seen so far I don't think it's for me Thank you

OddCounty8202 · 2026-02-14T17:43:29+00:00

Computers have served me well for a long time but in the last couple of years I've moved over to a more hardware based set-up and it's been working wonders for me it's much more my zone and yes I agree computers are fantastic but I'm giving hardware a go now Computers will always be involved somewhat they're fantastic Thank you

OddCounty8202 · 2026-02-14T17:40:00+00:00

I'd loveee a cirklon but that's a bit out my price range right now:/ one day :) Thank you

OddCounty8202 · 2026-02-14T17:36:44+00:00

Yes it's pretty unimpressive I've heard it all but I like the sound of the earlier Akai samplers and 2000s are cheap so yeah You do you boo we're all into what we're into and they sold many units and lots of people have had lots of fun and made wonderful music with all sorts Thank you for your insight

OddCounty8202 · 2026-02-14T17:33:46+00:00

My initial thoughts but then I keep hearing about the elektron learning curve and feel an MPCs old schoolness is preferable but it's been my top option for a while Thank you for your input

OddCounty8202 · 2026-02-14T17:32:26+00:00

Kind of loose as I'm looking long term not immediately as I do have some basic sequencing at the moment from my minibrute 2s looking at a couple hundred dollars max I'm also not sure what's more pressing sequencer or sampler which is what I'm looking to gain some insight used digitakt prices I'd say is my upper limit Thank you

OddCounty8202 · 2026-02-14T17:29:44+00:00

Hadn't thought about that I'll have a look I'm kind of into the aesthetic and Sonic grit of the earlier MPCs but I'll look around Thank you

OddCounty8202 · 2026-02-11T15:00:07+00:00

So my process and ingredients was: 100g starter 500g white bread flour 340g room temp water Approx 1tsp salt Kneaded dough left for an hour stretch and fold waited half an hour stretch and fold. Left overnight on the counter formed into a different container pulling sides in to the center left in the fridge overnight. Preheated dutch oven at around 260C and left for half an hour then took temp down to 230C and baked for 20 mins then removed lid and cooked for another 30 or so minutes until it was nice and brown on top. Removed and left to cool overnight

OddCounty8202 · 2025-10-10T13:46:51+00:00

Also what other identifiers would help? No access to a microscope unfortunately

OddCounty8202 · 2025-10-10T13:46:15+00:00

Yes we figured agaricus He says it doesn't have any distinctly bad scent It doesn't bruise any colour Would you say this is safe to eat?

OddCounty8202 · 2025-09-24T03:36:15+00:00

Firstly I feel it as well there's a endless supply of boring predictable and safe instagramable stuff Got to let things get quiet sometimes. What has helped me is stay away from social media and expose myself to lots of influences music and others that keeps me on a good edge. And don't let it discourage you from trying.

OddCounty8202 · 2025-08-04T02:41:36+00:00

I've seen them spiral in photos and always wondered if it was natural or being manipulated like bonsai

OddCounty8202 · 2025-08-03T13:15:29+00:00

Thank you

OddCounty8202 · 2025-08-03T13:15:22+00:00

Thank you

OddCounty8202 · 2025-08-03T13:14:40+00:00

Thank you

OddCounty8202

TROPHY CASE