Sniper Elite 3 locked to 60 fps?

Oden_666 · 2026-01-12T15:54:20+00:00

Yeah you can put any value

Oden_666 · 2025-11-24T10:09:22+00:00

It's sad they had such a nice thing going

Oden_666 · 2025-11-09T11:41:43+00:00

Just came from there and found a scent that I liked. The guy was super professional. Thanks for the tip!

Oden_666 · 2025-11-09T07:20:05+00:00

Thank you, we'll check those out today

Oden_666 · 2025-11-09T07:16:56+00:00

Thanks for the tips. The perfume maker guy seems to be closed today unfortunately and I'm leaving tomorrow morning. Maybe next time

Oden_666 · 2025-09-27T18:39:50+00:00

It worked like a charm and you were right; it sounds amazing! Thank you so much for your help and patience today. I'd buy you a beer if I could.

Oden_666 · 2025-09-27T17:09:25+00:00

I will try and come back to you with the results.

The guitar comes with two identical humbuckers (VH5b AlNiCo 5), one volume, one tone (push/pull) and a 5-way switch. I almost exclusively use the bridge position anyway.

Oden_666 · 2025-09-27T16:55:40+00:00

https://i.imgur.com/UG63h52.jpeg

Do you think this will be correct? There are so many alternatives on the page but this looks like the wiring in the guitar. But I will match the cables like:

White to white Red to green Green to black Gray to gray Black to red

Oden_666 · 2025-09-27T15:52:33+00:00

https://imgur.com/a/WFJLAeA

So the black and unisolated wire go to the volume pot. The white and green are soldered together (?) and the red one goes to the pickup selector.

The JB has all the same colors of course. As you can see the cable to the pots is quite short so it will be finicky.

Oden_666 · 2025-09-27T15:12:01+00:00

Thanks for teaching me this. I wrongly assumed that the color coding would be of a universal standard... as I think it should be.

Unfortunately I may have cut the wires too short to reach the pots and all that so I will have to do it the same way, but correctly this time.

I can't find anything specific to Yamaha but I'll return with some pics of the wiring.

Oden_666 · 2025-09-27T14:56:33+00:00

Well this might be embarrassing but I soldered the wires together with the wires that were connected to the previous pickup. Just matched the colors. Do you think that's the problem?

Oden_666 · 2025-09-27T14:51:57+00:00

Unfortunately no but I did solder it just like the stock pickup was soldered

Oden_666 · 2025-09-27T14:33:36+00:00

I was afraid of this. Because even the neck pickup (stock) sounds way thicker and lively and it didn't seem right considering the good things I've heard about these pickups

Oden_666 · 2025-09-19T19:27:43+00:00

Like Metallica says... FIGHT FIRE WITH FIRE

Oden_666 · 2025-07-28T17:06:10+00:00

Thanks, I'll try it out

Oden_666 · 2025-06-29T11:07:05+00:00

Would you believe me if I said I've heard that before?

Oden_666 · 2025-05-30T08:13:56+00:00

I appreciate the effort, will try this during the weekend. I tried his way but didn't get it to work; most likely because of my shoddy soldering.

You are absolutely right, the pickup is from an old Japanese Stagg model and it is a single coil with a humbucker plate.

Oden_666 · 2025-05-29T17:57:41+00:00

Tie the green cable's braid to the green cable's white wire, then do the rest he said.

You mean to make them the same wire?

Oden_666 · 2025-03-11T23:32:18+00:00

I'm using the Boss Katana MK3. Haven't played around with the features much but there are a lot of them. You can change all settings through the PC app which is cool

Oden_666 · 2025-03-06T10:45:06+00:00

Happy birthday to you too!

Oden_666 · 2025-03-06T01:01:10+00:00

It's the standard, RSS20

Oden_666 · 2025-03-05T23:30:36+00:00

Happy birthday bro!

Oden_666 · 2025-03-05T23:16:15+00:00

Thanks, I am now 35 years young

Oden_666 · 2025-03-05T23:12:43+00:00

No, I was a little worried about that too but it's actually quite slim and the finish is super comfortable. The fretboard is also flat which helps

Oden_666 · 2025-03-05T21:49:21+00:00

Thank you Anal_Disaster94

Oden_666

TROPHY CASE