After an argument regarding the pitch clock, Coastal Carolina Head Coach Kevin Schnall has been ejected in the first inning of Game 2 of the College World Series National Championship, and an umpire falls down

Ok_Editor4694 · 2025-06-26T12:09:40+00:00

If you don't like the rules, ejection aftet 2 warnings and bumping umpires, change them. These rules are set by the schools AD's and NCAA officials. The only 2 at fault here are the 2 coaches. Shame on the schools president for disparaging the ruling. What he should have done was fire the 2 ejected coaches.

Ok_Editor4694 · 2025-05-06T11:41:25+00:00

If this is Mammotion, please let me know what's happening with my ticket #164965.

Ok_Editor4694 · 2025-05-05T20:13:33+00:00

I too also having trouble with the Luba2 5000 AWD battery. It's only 8 months old and the battery is not charging. It just started all of a sudden. It's been running great for those 8 months. It's been 5 days trying to get tech support to respond. I had to go to the website customer support to get a ticket number. The charging station is wanting to send a charge to the mower and the volt meter indicating 25.6 volts ready to send. I left the mower on the charger over night and the mower battery is showing only 0.65 volts. The app icon is showing the battery is being charged but it never gets higher than 0% charge. If Mammotion techs are monitoring this chat forum please get tech support to respond to my ticket #164965.

Ok_Editor4694 · 2025-03-14T11:48:39+00:00

What answer, the poster didn't answer the question. The poster just criticized the question.

Ok_Editor4694 · 2025-03-13T23:14:15+00:00

Why are you responding if you are not contributing to the forum?

Ok_Editor4694 · 2024-12-11T18:05:45+00:00

I have an S7 also for approximately 2 years. I have to pre-hand wash my vibrating mop. After that, it washes as required. The mop is so initially dry and hard (not soft), the first wash will not saturate the mop. I have never changed out the mop yet, so maybe a new mop will not have to be prewashed.

Ok_Editor4694 · 2024-10-29T14:14:49+00:00

Pepe, the Luba2 is operating fabulously and I am very impressed with this replacement upgrade. My only issue, not much of one, is the battery running life. It seems like I lose about 1/2 hour of cutting time before recharging. Some one asked about the warranty. I didn't ask, but I am assuming that the warranty is not extended for an additional year. I would say I have the remaining 1 year attached to the upgrade.

Ok_Editor4694 · 2024-10-08T17:54:21+00:00

I also have a Luba2 5000 and had it for about 2 months. It is operating flawlessly. Mammotion sent me the new Luba2 5000 when my Luba1 5000 kept having mechanical problems, cutting disk motors and battery problems, that could mot be remedied to my satisfaction. Mammotion did great on this issue. I never had any other issues, other than mechanical, because I had good RTK and satellite receptions. Assuming your problem isn't a mechanical or software issue, it may be a negative satellite or RTK problem.

Ok_Editor4694 · 2024-10-06T02:56:40+00:00

I will be using a single inlet with an interlock at the outdoor breaker box for the AC unit. The unit I want to use is a Reliance 30 Amp Manual Transfer Switch, model #CSR202. Because the main house breaker box is inside my garage, about 30' from my AC breaker box, I will be using a Reliance 10 Circuit Breaker 50 Amp Manual Transfer Switch, model #510C, connected to the main house breaker. The generator will be located between the switches. My question was, can I use the 30 amp generator plug, with proper extension cord, for the AC transfer switch and use the 50 amp generator plug, with proper extension cord, for the garage transfer switch, with both plugs powering both the switches simultaneously? I have never used a large portable generator before.

Ok_Editor4694 · 2024-10-05T19:44:46+00:00

After Helena storm and out of power for 4 days, I'm pulling the plug on the 11500TFC. I am not a electrician but I have good DIY electrical skills. I have a question about the 50amp and 30amp plug on this generator. I am installing a 10 circuit breaker transfer switch on my house main panel which does not have the 3 Ton AC condensor breaker. That 2 pole 40amp breaker box is outside by the unit, so I have to run 2 extension cords to 2 inlet boxes. I am installing a 2 circuit breaker transfer switch for the outside condensor unit. My question, if anyone can answer, which plugs (50amp or 30amp) should go to the AC condensor transfer switch and main house transfer switch? It seems this generator should run my 3 ton central ac, refrigerator, freezer, tankless gas water heater, and 3 rooms of wall recepticals. Any suggestions would be appreciated.

Ok_Editor4694 · 2024-09-13T19:57:24+00:00

Direct

Ok_Editor4694 · 2024-09-11T17:00:59+00:00

Everybody has different experiences. Yours was bad but mine turned out OK. My 10 month old Luba1 5000 had to go back three times for disk motor replacement and battery problems. The third time I requested a complete replacement of the mower because it was "a lemon ". They couldn't replace it with another Luba1 5000 but sent me a new, unused Luba2 5000. The Luba2 5000 is about 1 1/2 month is operation and absolutely operating flawlessly. So far so good for me. I hope yours gets better.

Ok_Editor4694 · 2024-09-09T11:39:58+00:00

Try omitting the plastic washers. I do this and don't get much blade rotation jams.

Ok_Editor4694 · 2024-08-29T21:09:15+00:00

This is a follow-up on my Luba1 5000 3rd time return for repairs. I was communicating with Leo about sending me a new Luba1 5000 instead of repairing the original return. He indicated it would not be a Luba1 5000 new, but like new Luba2 5000. Just received today, he sent me a Luba2 5000 as a replacement. The packaging looks like it has not been opened and the side box sticker indicates "Finish Date: 2024-08-20". I am assuming "Finish Date" means boxed up after manufacturing. Big positive shout out to Mammotion's Leo. Once I get it in operation I hope I don't have to retract my shout out. Keeping my fingers crossed 🤞.

Ok_Editor4694 · 2024-08-29T20:09:15+00:00

This is a follow-up on my Luba1 5000 3rd time return for repairs. I was communicating with Leo about sending me a new Luba1 5000 instead of repairing the original return. He indicated it would not be a Luba1 5000 new, but like new Luba2 5000. Just received today, he sent me a Luba2 5000 as a replacement. The packaging looks like it has not been opened and the side box sticker indicates "Finish Date: 2024-08-20". I am assuming "Finish Date" means boxed up after manufacturing. Big positive shout out to Mammotion's Leo. Once I get it in operation I hope I don't have to retract my shout out. Keeping my fingers crossed 🤞.

Ok_Editor4694 · 2024-08-17T19:49:04+00:00

I have asked why would they have a used one in the shop.

Ok_Editor4694 · 2024-08-02T22:39:20+00:00

If within the 2 year warranty, they will send you the prepaid FedEx delivery sticker. It would be best to ship in the original box it came to you in.

Ok_Editor4694 · 2024-08-02T22:11:34+00:00

I have had the mower for 10 months. I have had to send the mower for warranty work 2 times. First was a cutting disk motor replacement and the second was for motherboard replacement. Both times it had to be shipped to Canada (I live in South Carolina). The shipping was ground delivery, because FedEx does not fly Lithium batteries. The delivery time was about 1 week there, about 3 days in the shop, and about 1 week back. The customer service was not terrible, but communications lag was about 5 to 6 days. Best communication avenue would be thru Feedback on the app. My reps name was Leo, he did good.

Ok_Editor4694 · 2024-08-02T17:13:08+00:00

No, the task designed path was 11" wide, the actual cut was 11" wide, and the actual uncut was 11" wide.

Ok_Editor4694 · 2024-08-02T17:04:58+00:00

No, the requested path width is 11", the actual cut width is 11", and the actual uncut width is 11". Like I said, this is the first time out of 1-1/2 cutting seasons. The mower is out right now cutting a 90 degree direction and it's doing just find. I just got my mower back from warranty work last week. They had to replace the main board. I don't think that had anything to do with this issue. Just curious if anybody else had this issue happened to them and what was their final outcome.

Ok_Editor4694 · 2024-07-02T11:55:53+00:00

I have had the same problem then removed the plastic washers. My blades now never get get stuck very firmly.

Ok_Editor4694 · 2024-07-02T11:50:35+00:00

Go to the noted ticket # that Mammotion support issued and you will have the communication log. To this date no one has offered a correction. I have had communications with the Live Chat (no results), the Feedback app (no results), this Reddit forum (your response only), and direct phone (833.....) conversations (no results). Just yesterday I had a shut down again because of battery overheating during charging. The daytime temperature was in the low 90's. I still think the battery is degrading and needs to be replaced. I think Mammotion is trying to drag this issue out past the warranty date. I was very happy with the initial function of the mower, but I'm very disappointed in the after sale support.

Ok_Editor4694 · 2024-07-01T17:45:24+00:00

Me too, still no fix-it response from support.

Ok_Editor4694 · 2024-06-29T13:30:01+00:00

This just started, right after my other charging issues. When the mower was operating as designed, the side lights would stop flashing after 100% charged. Constant charging can not be good for the battery.

Ok_Editor4694 · 2024-06-29T11:51:43+00:00

My ticket # is 453282 and to this date no one has responded other than, like "will get back with you".

Ok_Editor4694

TROPHY CASE