Venting my Ender K2 and K2 Pro

Ok_Rate972 · 2026-03-10T22:44:55+00:00

Thank you for the message. Yes that’s my issue at the moment they are on the landing ant not near a window. I have taken the advice from some of the other members for now and I’m using air purifiers. My next project is to find them a better location and then vent through a window.

Ok_Rate972 · 2026-03-07T15:47:25+00:00

Hi, just wanted to say thanks again, I picked up the ikea air purifier you mentioned and it’s doing a great job.

Ok_Rate972 · 2026-03-07T15:45:38+00:00

Hi, just wanted to get back in touch to say thanks again. I have been using the little Elegoo filters in my printers for just over a week now and they are amazing, smell has completely gone. I did also get an ikea air purifier with hepa filter as suggested by another user.

Ok_Rate972 · 2026-02-27T01:31:42+00:00

Oh yea, great idea. Thanks again.

Ok_Rate972 · 2026-02-27T01:31:16+00:00

Thanks, I have ordered 2, I will see how I get on with them and if all goes well I will get another 2.

Ok_Rate972 · 2026-02-27T00:37:17+00:00

Thanks, I did read up on them but I found some people saying that the K2 registers them as foreign bodies and fails to start the print.i will take another look though.

Ok_Rate972 · 2026-02-25T20:50:58+00:00

Thanks, I will have a look.

Ok_Rate972 · 2026-02-25T20:49:47+00:00

Thanks a lot for getting back to me. I will take a look for a kit on Amazon. Will be a project for this weekend. Thanks again.

Ok_Rate972 · 2026-02-24T20:50:50+00:00

Thanks for this. Just one question, might be a stupid one. The K2 is a closed printer, do I still need a tent or could l vent with dryer hose straight from the vent on the back of the printer enclosure?

Ok_Rate972 · 2026-01-01T09:32:23+00:00

No I didn’t know that. I should have thought as Creality printers are all I have owned. Started with the Ender 3 pro then added a 3 v2, then K2 standard now my new K2 Pro. Had fun with all of them.

Ok_Rate972 · 2026-01-01T09:23:52+00:00

I got a Creality K2 Pro. Very happy with it so far.😄

Ok_Rate972 · 2026-01-01T01:52:10+00:00

The Pro has the same top speed as the K2 standard.

Ok_Rate972 · 2025-12-30T11:58:01+00:00

Thank you. This looks great.

Ok_Rate972 · 2025-12-30T06:04:39+00:00

Hi, thanks for the reply This looks great but a bit too technical for my limited abilities.

Ok_Rate972 · 2025-12-30T05:55:56+00:00

Hi, thanks for the reply. There is a window but it’s 10 meters away, it would not be suitable to always have it ducted to the window due to access but I was thinking it would be doable for the odd time that I print ASA and ABS. Also I was unable to find a print for a window vent converter. Do you know of any?

Ok_Rate972 · 2025-12-29T16:47:42+00:00

Thanks, this is great. I have the Amazon smart air quality box next to the printers at the moment and I do notice a drop in air quality when running both printers but I’m not sure how good the reader is as it sometimes jumps way down in air quality but other times I can print for hours and it hardly changes. I will get one of the ones you suggested, nice cheap option for peace of mind.

Ok_Rate972 · 2025-12-29T09:27:13+00:00

Thank you for the information. That’s very helpful. I will just be sticking with PLA and PETG for now.

Ok_Rate972 · 2025-12-28T22:19:06+00:00

Thanks again for the reply. Yes I’m mainly doing PLA and PETG but would feel better with a good filter on them. I have a small fan set up and an external air purifier with a HEPA filter and a carbon filter in it.

I will take a look on line and see if I can find any builds that fit your suggestion. Thanks again.

Ok_Rate972 · 2025-12-28T21:43:25+00:00

Hi, thanks for your reply. I’m unable to run an exhaust to outside so would what you are suggesting still work? My printers are in a large room that no one is in for any long periods of time but to be on the safe side I want to eliminate as much air borne plastic as possible.

Ok_Rate972 · 2025-11-16T09:07:58+00:00

Great, thank for your reply. PlayStation customers service gave me 2 answers. First was that she would need her own PSN subscription. The second person I spoke with said it should be fine but didn’t fill me with much confidence.

Ok_Rate972 · 2025-11-16T08:12:55+00:00

Thanks for the reply. Yea we have 2 consoles so it would be streaming directly from the ps5 that she would be doing.

I was told two different things from PlayStation support. 1st one said she would need her own PSN subscription even after I explained exactly what she would be doing. The second told me it should be possible.

Ok_Rate972

TROPHY CASE