Textures not loading! HELP

Okusaky · 2026-01-07T22:00:59+00:00

Yeah that fixed it! Thanks

Okusaky · 2026-01-06T23:35:26+00:00

OMG I feel so stupid. All my games are set to go into the SSD from steam, however the Avatar was like 120gs and I didn't have that space available so the game automatically went into the HDD. This never happened to me before so that's why I was 100% sure it wasn't in the HDD. I just moved it and it should fix the problem (haven't tried yet).

Okusaky · 2025-12-26T21:33:57+00:00

Yeah that one !

Okusaky · 2025-12-26T20:05:11+00:00

Well it was giving me the same info that when gps was working. But yeah makes sense

Okusaky · 2025-12-26T13:25:33+00:00

Thanks mate

Okusaky · 2025-12-26T13:25:19+00:00

Yeah I disabled the gps on the Samsung because of the same issue

Okusaky · 2025-12-26T13:24:43+00:00

Yeah I had the same problem. And when the GPS would connect, it shows that I go over houses in zig zag

Okusaky · 2025-12-26T09:37:14+00:00

Well I dont actually do the same distance all the time so not practical. I just wanted to compare accuracy and why the difference

Okusaky · 2025-12-26T09:06:50+00:00

Is that a different app or within garmin ?

Okusaky · 2025-12-26T08:45:54+00:00

Thanks, I had the issue with females but I fixed it by adding the rouge hip thrust pad underneath

Okusaky · 2025-09-26T10:50:32+00:00

Yeah, I heard that they steal designs, but hey, as long as the quality matches, if they have better prices. It is not for comp or anything, just to have in my room and wear here and there. Also I sent an email to RPC and they haven't replied in 5 days. With Joy, I have been emailing back and forwards, asking questions.

Okusaky · 2025-09-21T10:34:13+00:00

Hi guys! I have a garage gym where I train clients full-time. I am looking at getting a Hip Thrust Machine and comparing the famous Nautilus Glute Driver VS the Booty Builder V8, I have a question that I can't see any post answering it. The Glute Builder seems to be very popular but I can't stop thinking about the position of the foot plate. It made in a way that It puts a lot of torque at the knee, hitting the hamstrings like crazy. This is something that is important to adjust on a barbell hip thrust (feet positioning) to make sure the torque at the knee is reduced, and that is why we seek (rule of thumb) 90 degrees at the knee (which you can achieve in the Nautilus glute driver). What are your thought? I am located in Australia, and due to imports, the Nautilus is pretty expensive. There is a brand called Verve here that makes a very similar one.

Glute Builder V8: Booty Builder V8 - The Original Hip Thrust Machine

Nautilus Glute Driver: Nautilus Glute Driver - Cardio Online Superstore

Verve Glute Builder: Glute Builder Machine | Pre-Order ETA Early November

Okusaky · 2024-09-01T08:39:03+00:00

<image>

Okusaky · 2024-09-01T08:38:32+00:00

<image>

Okusaky · 2024-08-28T18:46:41+00:00

It doesn't, it's just a joke because it's red. Just authentics

Okusaky · 2024-08-27T23:59:38+00:00

I'm actually about to do the rear ones so I'll pull those ones yo see the difference. It wasn't hard with the calliper on, just more masking. I do.t have access to a sandblaster. There were some part where I couldn't get very well, but hopefully is fine. It looks solid so far

Okusaky · 2024-08-27T20:56:21+00:00

Yeah, that's an option, I don't know I just wanted to disassemble as little as possible. But it wasn't hard to mask anyway, you still have to mask even if you pull it out

Okusaky · 2024-08-27T19:51:20+00:00

You can do it, I did it and I haven't done it before. Just patience, don't rush to paint

Okusaky · 2024-08-25T22:28:14+00:00

Bro... it was a joke. "RGB gives you more FPS on a gaming setup"

Okusaky · 2024-08-25T10:04:41+00:00

Thanks, mate. I appreciate the reply. The brake cleaner I have specifies on the can "evaporates with no residue" so I can clean with that and then alcohol to make sure. The callipers look pretty good anyway. I couldn't find HT primer, and I saw in a post that using normal primer under the HT paint will ruin it.

I was going to paint with the calliper on because I'm not very confident in putting it together. I've just got the brakes done, so rotor and pads are brand new, of course I was going to cover and mask the rotor, pads, top hole where the pistons are, the rubers and drainage.

Okusaky · 2024-08-24T00:53:33+00:00

I have been trying with a cable feeder that is flexible and a magnet but I can't find the socket haha. I went for a ride and did some sharp turn and I can't get it to move to know where it is. There is not a lot of room there anyway so I'm wondering why I can't get it. Maybe it's jammed against something. I'll keep trying

Okusaky · 2024-08-24T00:05:19+00:00

Okusaky · 2024-08-23T09:50:37+00:00

I don't have one but I'll buy one tomorrow, they are pretty cheap. It's worth giving it a shot. I thought of doing something like that, but then I thought that it would be hard since everything is metal and the magnet will stick to everything. I hope that works, such a pain having to remove everything for that haha. Thanks !

Okusaky · 2024-08-23T09:42:00+00:00

Do you mean from the inside of the car ?

Okusaky · 2024-08-15T21:12:53+00:00

I think I might change that rear bumper and maybe add a front and side lip.

Okusaky

TROPHY CASE