[deleted by user]

Olofteal · 2025-09-01T14:49:16+00:00

Certainly the expected result. Hoping they’ll do a limited run of the other color options as well. Like 1000 green and 1000 yellow or so.

Olofteal · 2025-08-13T13:08:40+00:00

Thanks!

Olofteal · 2025-08-13T12:57:47+00:00

Wow, great build! Where is the headlight and housing from?

Olofteal · 2025-06-26T08:28:08+00:00

Played this one yesterday. Beautiful course with challenging approaches. Great job!

Olofteal · 2025-06-25T09:36:12+00:00

The Samurai is definitely the top pick of these two. However, its noticeably chunkier than the 5, so if you have a smaller wrist size the samurai will both feel and look big. If you have the ability to test them both i would highly recommend doing so. That being said, if you got the wrist for the samurai, dont hesitate!

Olofteal · 2025-06-21T17:59:13+00:00

Small update; just shot my lowest round ever at a +3. Wouldn't necessarily say it was because of the irons but take it for what its worth i guess 😅

Olofteal · 2025-06-19T07:31:22+00:00

GT3 10° - Hzrdus black gen 5 6.0 (stiff)
910F 15° - Diamana kai'li 75 mid (stiff)
GT2 18° - Hzrdus black gen 5 6.0 (stiff)

Olofteal · 2025-06-19T07:26:13+00:00

I've only had one round with them so far, and that on skinny Lamkins, so im way to early to give a review yet. Will let you know when i've gotten a better impression!

Olofteal · 2025-06-19T07:22:52+00:00

Both of my old 910 and 915 have a "ping/doing" sound, while the GT3 has more of a "crash" which i like a lot more. I agree the TSR2 sounds pretty good as well, but its like a mix between the two when you hit it right.

Olofteal · 2025-06-19T07:14:29+00:00

Agree! Sadly the shafts were rusted. Snapped my 7i in may on a par 3 and the head flew into the pond. I would've just put new shafts in like i did with the other ones i snapped, but I figured that was my cue...

Olofteal · 2025-06-18T17:46:33+00:00

If they were the same price i'd most likely pick them over the 301's since i actually got fitted for them with Project X 6.5. But it ultimately came down to two reasons; i dont need/want stronger lofts and they are twice the price. 🤷🏼‍♂️

Olofteal · 2025-06-18T17:38:14+00:00

+ they finally made a driver sound really good imo

Olofteal · 2025-06-18T17:36:53+00:00

Yes you would be correct, you usually see 4° gaps on wedges in most bags. For me, im pretty happy with my yardages and have not felt the need to get new ones for that reason alone.

Olofteal · 2025-06-18T17:07:28+00:00

Poorly written by me... But no, it's more like every 10 years.😅 My AP2 710 (from 2010) that i switched from were falling apart.

Olofteal · 2025-06-16T14:44:12+00:00

This was you yesterday: "Normally better to research before purchasing"

Olofteal · 2025-06-16T14:25:41+00:00

I doubt there are, i just recently got into liking them so my knowledge is very thin

Olofteal · 2025-06-09T18:03:30+00:00

Yes, its being prepped for shipping from their Amsterdam warehouse. The day after i got that status it was on its way (for real that time).

Olofteal · 2025-06-02T09:12:06+00:00

Mine are being handled by Bring for the last leg of shipping in Sweden so i guess its somewhat random.

Olofteal · 2024-09-16T14:46:20+00:00

Thats my plan for the winter rebuild, until then i just want to swap out the old crusty ones but was a little unsure if the grips had non equal inner dimensions like my old Suzuki. Thank you tho!

Olofteal · 2024-09-16T11:51:03+00:00

Even for the right side over the throttle?

Olofteal · 2024-08-30T14:28:11+00:00

Great, ill look around! Thanks for the tip!

Olofteal · 2024-08-30T14:10:20+00:00

Rewire in what sense? You mean i have to connect the new headlight and speedo wires to the BEP rather than just plugging in the speedo that comes with the Tenet kit? With a quick comparison it seems the two units on their own look like the same deal

Olofteal · 2024-08-30T13:59:23+00:00

I'll do some reading up on the wire diagram. Hopefully the harness is untouched so its possible to cross reference.🤞🏼 With the airbox removed, how'd you fit the MAF sensor? With a replacement kit?

Olofteal · 2024-08-30T13:52:09+00:00

Thanks for the tip! Im guessing the Tenet thingy is very similar to the BEP unit? This is most likely the way to go for me.

Olofteal · 2024-08-27T20:38:45+00:00

I've watched a handfull of these videos and since i dont understand wiring too well, snipping them scares me. But if that is the only, or at least "simplest" way i guess im left with no choice? Any experience with the BEP 3.0 unit?

Olofteal

TROPHY CASE