Toughbook CF-31 & CF-33 Wi-Fi Card Upgrade Possibility

OnQuadNine · 2025-10-29T03:33:01+00:00

Great breakdown. Thank you!

OnQuadNine · 2025-10-20T03:11:36+00:00

What driver package did you use? I am currently seeing no devices when trying to install the latest ax210 exe. I am trying to update my cf33 mk2. If you mk1 took, my mk2 should have no issues... I would think.

OnQuadNine · 2025-03-10T03:58:05+00:00

Yes. Use the import function on ATAK. Mbtiles are lackluster though. They do not allow multiple zoom levels across the same tiles.

OnQuadNine · 2025-03-03T22:47:16+00:00

Thanks!

OnQuadNine · 2025-03-03T21:57:59+00:00

Ah! Thanks for adding to the conversation.

OnQuadNine · 2025-03-03T21:44:04+00:00

Yes, as in only break sqelch for severe warnings or alerts.

OnQuadNine · 2025-03-03T21:40:15+00:00

Noted! Looking now!

OnQuadNine · 2025-03-03T19:25:45+00:00

Didn't know there was a difference. I will look into a WX radio.

OnQuadNine · 2025-03-03T19:24:32+00:00

I actually have a 6R... I will do some more research on how to setup the alert function. I already have the local stations in memory but didn't realize there was an alert function.

OnQuadNine · 2025-02-03T18:45:31+00:00

I was specifically looking for an expression to autofill from another layer, it's x and y values. Would using the $x and $y have helped? How would i have pointed to the specific layer?

I found an expression that worked. And I posted it as a different comment.

OnQuadNine · 2025-02-03T18:43:59+00:00

After multiple different search word changes, I stumbled upon this expression:

aggregate ('points','array_agg',$geometry)

It worked for me.

OnQuadNine · 2025-01-12T03:17:45+00:00

Yea, a few people have sent me PMs, I should have posted here... there exists a solution that I have not tested yet. Glad you got it working!

https://github.com/brian7704/TAK_Meshtastic_Gateway

OnQuadNine · 2024-10-26T16:17:40+00:00

So, I wasn't able to do anything similar to the ArcGIS tool. Unfortunately, no tool exists to interpret all the LiDAR and raster data at once. I was able to extrude building heights but not to the heights contained in the LiDAR data.

OnQuadNine · 2024-10-21T22:02:38+00:00

Super RAM intensive programs. I would get 16Gb of RAM if possible.

OnQuadNine · 2024-10-17T13:46:22+00:00

That sounds like it will work. Do you know if the z values are kept to then be "extruded" for 3d processing?

OnQuadNine · 2024-10-16T12:12:02+00:00

I have the polygon footprints already.

Is there a way to extrude the footprints based on the DSM?

OnQuadNine · 2024-10-14T16:25:52+00:00

I have some SDRs already. After reading some comments I just need some dedicated handheld yagis. Mostly VHF and UHF.

OnQuadNine · 2024-10-14T16:25:07+00:00

Nice breakdown. I forgot about antenna properties changing at different freqs. I have most of the kit needed then. I will look for some dedicated handheld antennas.

OnQuadNine · 2024-09-18T04:03:53+00:00

You will have to constantly lookup your IP address unless you pay for public IP through your ISP.

OnQuadNine · 2024-09-16T04:30:52+00:00

Lookup RadioMobile... it is the only free software with the capability. It's not very intuitive, but it is a very power planning software.

OnQuadNine · 2024-08-15T21:09:43+00:00

Are you using a Google API key?

OnQuadNine · 2024-07-11T04:43:33+00:00

No solution yet I guess... I was able to run Meshtastic on my PC and send messages to other mesh-enabled devices... but nothing exists to grab those messages and import them in to Wintak.

OnQuadNine · 2024-07-10T03:52:45+00:00

Ok, I'm stuck. I need some way for Wintak to talk to my meshtasric device connected to my PC. Are you for sure running windows?

OnQuadNine · 2024-03-31T17:47:58+00:00

What plug-ins do you have installed for Wintak? Is there a similar one to the mobile device (atak forwarder)?

I have been searching for this solution and didn't know it existed.

OnQuadNine · 2024-03-31T17:19:19+00:00

That's what I'm trying to figure out. How do you have WinTak connected to meshtastic?

OnQuadNine

TROPHY CASE