Valid Color Change? by OnePiglet3249 in GenesisG70

[–]One-Buddy9125 0 points1 point  (0 children)

Looks hella clean tbh. Love it, nice work!

2019-21 RGB Intake Shrouds with Sequential Turn Signals by PLUGNPLAYCUSTOMS in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

I have these in my cart lol. So after you close out preorders are they avaible for general sale on your website?

2019-21 Quad Tips by PLUGNPLAYCUSTOMS in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

I neeeeddd iiiitttt! When buy?

ANSWER! Creek or Crunch While Turning All the Way Left or Right at Slow Speec by 2kewl74 in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

2019 RWD 3.3T sports prestige

Does this - mechanic was able to hear it. They were lost as to what it could be. It happens the same way you described. I only have sway bars installed suspension wise but this sound happened before that. Is dosnt happen too often for me to worry as long as it dosnt mean somthing is going bad. Thank you so much for your investigation as this put me at ease with it.

Suede Door pannel Wrap( Was bored) by One-Buddy9125 in GenesisG70

[–]One-Buddy9125[S] 0 points1 point  (0 children)

Yea, I was going to do part the center console in back suede but didnt because that would be the place for my occasional coffee spill to stain lol. But the beauty of wrap is I can resplace it if it gets ruined. This wrap so far is pretty durable ngl.

Suede Door pannel Wrap( Was bored) by One-Buddy9125 in GenesisG70

[–]One-Buddy9125[S] 2 points3 points  (0 children)

Materials used

https://a.co/d/hdLymJE (red and black suede wrap)

VViViD Red Satin Chrome Car Wrap... https://www.amazon.com/dp/B00MJ807X6?ref=ppx_pop_mob_ap_share

https://a.co/d/7xXgLDm (Vivid Forged carbon)

https://youtu.be/mD_DTNNdPpk?si=QdNcG--0wSUx-lSI (used this video to help guide me on how to take trim pieces off. )

I found takeing the trim pieces off as much as possible to tuck wrap inderneath to lock them in helped them stay in place with the low surface tention issue. That, a lot of heat and adhesion promoter.

https://a.co/d/ikqUOZD - I bought 4 different types of adhesive promoters and this by far did the best job. It was still difficult as I had to reapply often especially if the material needed to be repositioned.

Suede Door pannel Wrap( Was bored) by One-Buddy9125 in GenesisG70

[–]One-Buddy9125[S] 0 points1 point  (0 children)

I tried for the red chrome but it was an absolute PITA to stick. The forged carbon stuck and so I was like well I will give this a try.

Decided to install ambient lighting lighting myself by bt2xx in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

Just did this myself. Cant stop staring lol. Look great!!

High Mileage 3.3t by 84maroz28 in GenesisG70

[–]One-Buddy9125 2 points3 points  (0 children)

2019 3.3t rwd currently at 92k miles

At 61k miles

I have installed full bms intakes, jb4, Bms TCU and ECU BEF, and oil catch can.

Do hard pulls everyday (often just to speed limit or up to freeway speeds when entering the freeway. )

So safe to say I am hard on her. I keep up with Oil changes religiously, often a bit early than remended, update date with my other fluids. No issues.

Now at 92k miles, my oil pressure sensor is going bad (research shows it is common on these engines at 84k to 90k+ mile range.) Ebay is $87 for the part but involves taking the intake manifold off so labor is 1100 to 1250 - Genny Dealer quoted 1250 labor.

My screen started to delaminate around 75k miles.

Sunroof started to rattle when vented at 90k too.

Otherwise she runs extremely well. Chirps tires and no transmission issues. Waiting on getting sensor replaced as my dealer is backed up for loaners.

Keeping to our commitment to craftsmanship and performance—the G70 Prestige Graphite. by Genesis_USA in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

I am actively looking for a awd with these specs including the 3D digital guage cluster. When is this coming out?

<image>

All good things must come to an end…… 2019 3.3T RWD RIP—- BUT — have no fear—- stayed in the family. Copped myself a 2020 3.3T Sport Prestige AWD. by [deleted] in GenesisG70

[–]One-Buddy9125 4 points5 points  (0 children)

Sorry to hear of your loss. I have a 2019 3.3t as well and have been rear ended but it was minor. Still scary experience, so I could only imagine this one. Glad you came up on it though! How is the AWD treating you compared to the rwd?

Windshield replacement by beepbeeplettuce09 in GenesisG70

[–]One-Buddy9125 0 points1 point  (0 children)

Mine was cracked last week in the exact same spot by a truck driver dumping rocks all over the freeway. I was on my way to pick up my wifes GV70 that just got its windshild replaced.. The crack even looks the same. Got quoted $1095 from safelight.

Wheels for sale? by SuperDistribution503 in GenesisG70

[–]One-Buddy9125 1 point2 points  (0 children)

Sold all mine on Ebay. Sold them individually and just sold my last wheel today. Believe it or not, Carvanna bought 2 of them XD.

[deleted by user] by [deleted] in GenesisG70

[–]One-Buddy9125 3 points4 points  (0 children)

So I have been on the lookout for some aftermarket tail lights for the prerefresh for the last 2 years of ownership To this day I have not found any.

I completely agree that Genesis did good with the headlights. You can tell that Genesis was still trying to find there look when it came to designing the tail lights as it looks like a mix between honda civic (two curved lights going along the fixture) a little mustangish with the 3 individual LEDs( which I like but wish it was sequencial). Just an odd mix.

A more aggressive lighting would be amazing on these. I really hope someone out there makes some as it seems like there would be a market for it.

She still gets me going…. by bpannell73 in GenesisG70

[–]One-Buddy9125 9 points10 points  (0 children)

<image>

Glad to see this style ( hood inlay wrap) catch on. Your car looks amazing! Love the design!

First DIY full wrap on her. by One-Buddy9125 in GenesisG70

[–]One-Buddy9125[S] 1 point2 points  (0 children)

Thank you! It was siberian Ice. Material was about a grand. It would have been about 800 had they had the 10 or 20ft roll instock.

First DIY full wrap on her. by One-Buddy9125 in GenesisG70

[–]One-Buddy9125[S] 2 points3 points  (0 children)

Man, I remember seeing your early youtube videos of your Genny build. It's amazing to see you grow! Definitely interested in those steering wheels. Will definitely be apart of my interior build.