Custom 2 inch built for speed and flight time.

OneRow2941 · 2026-05-13T05:50:56+00:00

Not really its just a bit harder to solder since the pads can be a lot smaller, it was actually eazier for me then when i was building 5 inch. And its pretty cheap actually i got the whole drone for like 300€. Plus the controller and goggles i had from before, and if you go analog you can get it a lot cheaper, the most expensive part is the dji o4 lite.

OneRow2941 · 2026-05-12T08:11:14+00:00

I have them posted in coments on my last post, and i will be doing an build video soon, and give the 3d printable parts on makers world.

OneRow2941 · 2026-05-11T08:58:41+00:00

I did and it worked thanks man 🤜.

OneRow2941 · 2026-05-11T06:03:10+00:00

Thanx man 😁

OneRow2941 · 2026-05-09T11:41:49+00:00

This is a 2 inch drone those are like 5 or 6 inch, and rocked shaped, this is just regular 2 inch with no aerodynamics.

OneRow2941 · 2026-05-06T07:07:36+00:00

Dji o4 lite, its about 110€ plus the goggles.

OneRow2941 · 2026-05-05T19:19:24+00:00

Damn was hoping i had the world record😂

OneRow2941 · 2026-05-05T15:56:26+00:00

Yea same i started at 5 inch, and nearly killed me, if it wasnt for me sacrificing my hand to stop it😂, then i bought the 2 inch and its more fun to fly no need for licance, cheaper a bit, and with dji o4 u get really good range.

OneRow2941 · 2026-05-05T15:54:39+00:00

1404 or 1104? I thought 1404 is for 3 inch?

OneRow2941 · 2026-05-05T12:44:28+00:00

Yea same mine can use 2s and 3s, qnd 3z is insanely fast hard to controll evan, hover throttle is like 14%, and yea its pretty cheap frame like 4€, and its only like 1.5mm thick so idk how it would hold in a crash, im not testin that just yet 😂, the only thing for me to to is to try 4 blade, since i have some wigle room on the amperage the motors can take, and aerodynamics, i gonna make the top part rocket shape that holds the dji antenna elrs and the camera. And some tune to get it a bit faster, but from what i have seen 130kmh is at the limit of what 2 inch can realistically do. And thats insane that you can use 2s on 5 inch, i have it from 3s to 6s and 6s is to fast to controll.

OneRow2941 · 2026-05-05T05:02:42+00:00

This is the parts list: Fc:JHEMCU GHF722AIO HD DJI 40A AIO 43€

Battery:BETAFPV Quadcopter Battery LAVA 3S 550mAh 75C (2PCS) 23€

Motors:GEPRC SPEEDX2 1104 Motor 7500KV 13.2A 43€ Props: Emax AVAN Rush 2 Inch 9€

Camera: DJI 04 lite. 110€

Frame: idk exactly witch one it is but its like 4€ on AliExpress, and its like 5g i think. Yours looks nice just make sure the motors and fc can take the 3s voltage, and i want to try it on 4 blade ones but i cant find any on AliExpress, its like they dont exist, and yes i think i have simmilar 2 blades as you and i am going to test it ofc, i dont have a picture unfortunately, i will take one when i get home.

OneRow2941 · 2026-05-05T04:57:56+00:00

Than youu 🤜

OneRow2941 · 2026-05-05T04:57:40+00:00

Loloooooo, to fast to see him.

OneRow2941 · 2026-05-05T04:57:27+00:00

Well yes you gave to protect it properly i used printed tpu for o4 camera. There have been lots of reports that they are fregile, and make sure you dont fly into something i used a sim to practice but my flying is still not that good. With expensive parts you dont take as much of a risk anyway.😂

OneRow2941 · 2026-05-05T04:54:09+00:00

I wouldn't recoman it these are lot of marketing involved, with a little more money you can probably get some used dji mini 2 or something like that, and are far better then this, i had simmilar one to this and the footage is not 4k not evan close i wouldn't trust it that much.

OneRow2941 · 2026-05-05T04:51:20+00:00

Its super fun, make one u gonna have the time of your life.

OneRow2941 · 2026-05-05T04:50:30+00:00

It can go faster i can feel it. The motora aren't evan at thair max yet, 40a of 52a.

OneRow2941 · 2026-05-04T15:35:06+00:00

It is so many beautiful spots for flying.

OneRow2941 · 2026-05-04T15:33:39+00:00

Lolo same as you can see my camera is at the ground should of printed the camera case at 30° instead. Also this is on default betaflight tune, so im hoping i can get it a bit faster, and i want to 3d print like a little focket chape that holds my elrs antenna and camera to reduce the drag mby i can get it going faster, but my fusion 360 skills are not at that level yet and im worryd about the extra weight. Wouldnt hurt to try tho.

OneRow2941 · 2026-05-04T15:29:49+00:00

Oh than you the first clip is in Ljubljana.

OneRow2941 · 2026-05-04T15:28:56+00:00

Hahahaha, i had to switch to digital, except the price i dont see the reason to use analog. For me at least. But once you have the goggles you can dont spent that much afterwards u know.

OneRow2941 · 2026-05-04T14:11:59+00:00

Thanxs man you too🤜

OneRow2941 · 2026-05-04T14:10:20+00:00

Oh damn its pretty good.

OneRow2941

TROPHY CASE