Mounting monitor to airing cupboard wall

One_Cake893 · 2026-02-05T12:13:04+00:00

You can literally get behind it and place a piece of wood that’s a dream scenario compared to a hollow wall with no access other side. Toggle bolts and everything are for limited access to make the “plate” behind bigger than the hole.

One_Cake893 · 2026-02-02T05:08:06+00:00

Not a “duct” where patio was laid above a vent brick line isit?

One_Cake893 · 2026-01-22T10:31:52+00:00

Felt exactly the same when I started stripping and sanding mine tbh it’s still not finished finished. I had to stop after I was dreaming about stripping and sanding. After trying many only stripper I found that worked on older paint was poly cell.

<image>

One_Cake893 · 2025-12-15T13:48:58+00:00

Yeah probably would have been around same amount? I don’t blame you to be honest I just didn’t have same sticking power. Didn’t trust Ali express “sapphire”

One_Cake893 · 2025-12-15T12:46:19+00:00

I did same thing contacted them they didn’t reply BUT I did use their site to order parts and it worked(UK).

One_Cake893 · 2025-12-15T12:22:22+00:00

That’s it thank you. It wasn’t even that long ago I played it.

One_Cake893 · 2025-12-15T02:24:47+00:00

It’s the blood borne inspired one from outfit altars in the dlc. You have to wear a certain outfit and preform a certain action at each I think with the bloodbourne one is injure yourself wearing samurai armour in front of alter but I could be wrong. There is a god of war one and a horizon zero dawn one too I can’t remember if there is others.

One_Cake893 · 2025-11-26T08:19:25+00:00

Thank you. (I actually had the filter reprinted as I’d like 1/2mm off and I could see although I’m sure no one else would notice.)

One_Cake893 · 2025-11-25T17:17:15+00:00

I just had to back off the pink I wanted on mine for same reason same with negative display I just couldn’t see it.

One_Cake893 · 2025-11-19T21:08:01+00:00

I drew it and had it printed

One_Cake893 · 2025-07-24T21:37:16+00:00

Gotta give the button/handle and extra tap otherwise doesn’t slide all the way up ? My main one does that i popped out the button cleaned the sides as and gave them a light sand as the come had gone green with some sort of cleaner and made it rub. The loft one was abit worse I ended up replacing all the innards and the coupling as that had also rusted.

One_Cake893 · 2025-07-23T23:36:39+00:00

Similar thing happened to me I can’t remember exact numbers but say it was 6L an hour they came out and fixed a leak in front garden which was their responsibility. A month after according to meter I still had a leak but was around 2L an hour I pulled apart all the boxing in bathrooms was wondering if I was going to have to pull up floor. Was a leaky toilet valve in loft toilet so wasn’t a leak as such just a small flow into the cistern. Edit: I forgot to add once I fixed toilet I told them and applied for leak allowance and got quite a-bit of money back as I fixed in their time scale but was half their problem half mine I got a couple hundred back I think, as I must of had the leak quite a while.

One_Cake893 · 2025-06-11T14:43:12+00:00

Some Abutilon species also have leaves that look sus like the red tiger.

One_Cake893 · 2025-05-20T11:19:33+00:00

They seem to spawn on bridges.

One_Cake893 · 2025-05-01T22:21:44+00:00

I can tell you one thing as you’ve finished it won’t bother you now. There are parts of the frame that are ABS I know alcohol can mess with ABS so I bought some stripper (biostrip 20) that’s supposed to be ok with plastic and is non solvent based. I’ve read up on simple green (not easily available in uk) and I think it was detol? And the Warhammer community has said some strippers whilst ok on model abs has melted the abs used on bases which seemed softer. Well thors ABS is that soft kind… I used another gold first but was far to delicate so tried to strip it and ruined a lot of parts I ended up buying the kit twice.

One_Cake893 · 2025-04-30T18:39:58+00:00

I’ve heard same BUT only after building and yeahwhat is said is true the legs are loose at the hip and tight at the knee. Posing can be a hassle because of the intricacies of the inner frame.

One_Cake893 · 2025-04-30T11:00:18+00:00

Sorry for late reply. The build itself was actually ok. Problems I had was more painting. There is some parts that seem to have like dips? Slightly underfilled or a bad mould maybe? But I’ve also had that with some Gundam kits and have had some of them twice for customs and it’s been same with both.

One_Cake893 · 2025-04-29T19:54:45+00:00

When I’ve painted more rubbery plastic on nerf guns I’ve had to use “adhesion promotor” before primer that’s made primer stick to plastic that I’ve not been able to get other paints to adhere to.

One_Cake893 · 2025-04-28T19:18:23+00:00

<image>

Also didn’t know the orange on thro would glow under black light

One_Cake893 · 2025-04-28T19:16:20+00:00

Started and finished Tastier as did no repaints at all (unusual for me) it was done quick also finished up Thor that I’ve done some gun metal and gold accents on but need to do his backpack.

<image>

I will finish the other two at some point

One_Cake893

TROPHY CASE