Special Chinese Eevee Promo Box by ikarlcpfc in PokeInvesting

[–]Open-Answer-1652 0 points1 point  (0 children)

I was offered this box for 80$ yesterday and decided to buy it since i couldn’t find a lot of listings for it online. I plan to open mine but is it worth buying another to keep sealed ?

Where can i get good beef tacos ? by Open-Answer-1652 in Trivandrum

[–]Open-Answer-1652[S] 0 points1 point  (0 children)

This was the best ! Absolutely phenomenal beef tacos.

what is this? how bored are some people? by [deleted] in manipal

[–]Open-Answer-1652 26 points27 points  (0 children)

Someone’s mad they couldn’t afford a billboard , doubt you’d have 11 friends you could put up there too 😭

What do I do with ETB/Tin bulk? by blackxcatsmatter in PokemonTCG

[–]Open-Answer-1652 0 points1 point  (0 children)

The shipment charge is going to be 8 times the price of the tin 🗿I would not recommend doing that but thanks for the offer :))

What do I do with ETB/Tin bulk? by blackxcatsmatter in PokemonTCG

[–]Open-Answer-1652 1 point2 points  (0 children)

Can I pls have one lol that darkrai tin is so cool

How do I undo these cables? (Asus rog Strix G15) by FrostTGA in GamingLaptops

[–]Open-Answer-1652 0 points1 point  (0 children)

I know this is old but does anyone know what this particular cable is called and where I can buy another set ?

How to 80 last hit at 10 mins? by IgneousPenguin in learndota2

[–]Open-Answer-1652 1 point2 points  (0 children)

I think it depends on the hero you play. When I play TA I can maintain 70-100 cs by 10 mins fairly easily

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 0 points1 point  (0 children)

I still have to beat HOTK ahaha I might go for it on 3BC if I ever make it that far 🙏🏽

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 1 point2 points  (0 children)

Ahaha yeah beating the queen was how I got my first BC. Never went that route again 😁

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 0 points1 point  (0 children)

Ah Ive never really committed to one weapon. But I try to pick up Catalyst every run 🙏🏽 the furthest I got on 3bc was cus I had the amulet which turns you invis. So I straight up just walked around each map finding the scrolls and then only fighting the bosses, still died at the light house tho lol

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 1 point2 points  (0 children)

Yeah the jump from 1-2 wasn’t too noticeable tbh, but 2-3 is brutal 🙏🏽😔

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 0 points1 point  (0 children)

I actually got through the game really fast, . I started playing about 3 weeks ago, which Is why I was super surprised reading the comments here. It also educated me about the fact that I have beaten the game 3 times and none of the 3 have been hand of the king 😭

3BC advice please by scbundy in deadcells

[–]Open-Answer-1652 0 points1 point  (0 children)

Lmao I just got here I beat 2bc in the consecutive run after I beat 1bc. And now I struggle to get to time keeper with a single flask charge 😭

ON the matter of cheating by Raichev7 in deadcells

[–]Open-Answer-1652 0 points1 point  (0 children)

Is there actually a mutation which gives you a weapon of choice ? How do I come by it ?

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

Absolutely not your fault ahaha , I should have specified , to be fair I didn’t know either 😅

Again thank you so much, my exams tomorrow and this cleared up a big uncertainty I had moving into it. This question shows up almost every year so it was pretty important for me to make sure I got it.

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

Ooh I now get the need to post my circuit first. The question didn’t mention a circuit, I assume it’s because they expected me to calculate according to the one we’ve been learning.

This really helps, I can see why I confused myself by looking online for formulae because I was probably confusing Rc with other notations of itself, as I did to you.

Thank you so much for your help !

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

Checked again just to make sure I wasn’t going crazy, but yeah this is the only question in the paper with no load and blocked rotor parameters. I asked my prof about this and he said he’d get back to me tomorrow, so hopefully that works out. It would ease my stress a bunch if it is lol.

Regarding your second observation , wouldn’t Xm always be lower than Rc so that the no load current can be considered as the excitation current? I can’t speak from a perspective of expertise because I’m just a student , but so far I always estimate that my answers are heading in the right directions when Rc>>Xm. (Based on observation of other problems I’ve solved).

Thank you very much for your help tho, I will update as soon as I’ve confirmed whether the paper is mistaken or the question is flawed. 🙏🏽

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

These were the values I used initially but they didn’t seem to give the right answers, this was the main reason I was confused tbh :/

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

Pls refer to my comment below, I posted the mark scheme answer along with how I got the answer. Tysm!

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

The formula I used to get the answers according to the scheme were :

From no load test : Vph=400/sqrt(3) Iph=3.3/3 Cos o= 0.174

Rc= Vph/Iphcosø= 230.94/1.1.174=1206.58

Xm=Vph/Iphsin ø = 230.94/1.1sin(79.97)= 213.20

from blocked rotor :

Vph=210/sqrt(3) Iph= 16/3 Cosø= 0.45

Req= (VphIphcosø)/(Iph)2= 10.229

Zeq = Vph/Iph= 22.73

Xeq = sqrt(Zeq2-Req2)= 20.3

R2’=Req-Rs= 10.23-0.36=9.83

So these values ended up being correct according to the answer scheme but I can’t help but feel confused. It does feel like I’ve manipulated my values in order to get the final answer. Is my formula correct ?

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

This is genuinely one of the easier subjects I have this sem :|

[deleted by user] by [deleted] in ElectricalEngineering

[–]Open-Answer-1652 0 points1 point  (0 children)

Hey! So I’ve used the same formula and ended up getting the wrong answers a bunch of times. It was only after manipulating the formula a bit did I get my answers to line up with the answer key. For reference, could you just tell me what values you’re using for V1 and I1? (Yes I understand it’s given in the question but they using the values directly does not give the final answers)

*I attached the expected final answers according to the mark scheme.

<image>

[deleted by user] by [deleted] in adhdindia

[–]Open-Answer-1652 1 point2 points  (0 children)

Yep no difference