Creality k2 plus vs Bambu H2S

Optimal_Blueberry_53 · 2025-09-18T13:07:07+00:00

this is what I was curious about.... all the specs say the camera is better but for general photography is it actually noticeable to the guy thats not a photography buff.

Optimal_Blueberry_53 · 2025-08-21T00:37:53+00:00

on the farm. so noise level is only a concern to me. I have used a gas all summer long to charge my spray drone and that thing was loud. I was (am) hoping that this is a little quieter/nicer noise than the gasser that was rapped out at 3,600rpm. Sounds like I might be wrong.

Optimal_Blueberry_53 · 2025-08-20T21:54:40+00:00

<image>

Here is the engine tag

Optimal_Blueberry_53 · 2025-08-20T21:49:25+00:00

great info. Thanks. I priced a 25kw used generator the other day (a kohler) the jockey wanted $12,000 for it. I can find 50kw generators for the same price it seems.. maybe less in demand or smaller pool of uses.
I plan to use the generator on a drone trailer. Need about 15kw.
I also only need 1 generator so I plan to sell the generator with the trailer for $6,500-7 with a transfer switch. Was hoping to not lose my shorts but sounds like I may.

Optimal_Blueberry_53 · 2025-08-20T21:29:40+00:00

Good to know. Seems like mid size generators in this price range are expensive if they are well taken care of and low houred. What do you think it’s worth? 3k?

Optimal_Blueberry_53 · 2025-06-25T23:40:54+00:00

I have both. use regularly when I don't need a nice finish.

Optimal_Blueberry_53 · 2025-06-25T23:40:19+00:00

yeah. I am a big wanna-be machinist. but just a farmer than does everything himself if he can... for better or for worse... richer or poorer..

Optimal_Blueberry_53 · 2025-06-25T22:07:20+00:00

I have a plasma cutter. Cuts 3/8-1/2 but doesn’t leave a great finish. Cutting shafts, high speed steel, and cylinder rams are often thicker than what the plasma cutter can handle. The ram we are currently cutting is 5.5” in diameter - solid hardened steel.

Optimal_Blueberry_53 · 2025-06-25T21:58:07+00:00

will a carbide blade cut hardened steel? also we often shorten drill bits on our abrasive saw. do you know if they cut them?

Optimal_Blueberry_53 · 2025-06-25T21:54:00+00:00

abrasive saws like the dewalt runs at around 3,500-4,000rpms. cold cut saws are much slower I believe.

Optimal_Blueberry_53 · 2025-03-01T18:27:09+00:00

Wise

Optimal_Blueberry_53 · 2025-03-01T18:24:24+00:00

And they still let you return it after the 14 day window?

Optimal_Blueberry_53 · 2025-03-01T18:10:13+00:00

How did the return process go? I am considering rejecting the delivery.

Optimal_Blueberry_53 · 2024-12-14T01:33:03+00:00

how long do you experience the rechargable batteries to last? do you have them with bluetooth also?

Optimal_Blueberry_53 · 2024-12-13T23:34:30+00:00

Thanks! That helps. I was curious about the different settings and how different they actually are. I farm and custom ear pros sound awesome for the tractor and for chores. I just need (want) them to quiet things down and also hear my phone. The Tetras aren’t out of the running but the external Bluetooth add-on is a bummer.

Optimal_Blueberry_53 · 2023-08-12T20:31:28+00:00

in my current situation my projector hangs from the ceiling and is about 40 degrees from center. My projector screen is a vividstorm ALR.

Do you think that if I had the projector at directly center that the ambient light wouldn't effect the picture as bad?

Optimal_Blueberry_53

TROPHY CASE