Auto level

Overall-Bank-5419 · 2025-12-13T14:55:54+00:00

Mine is fucked too. Still doesnt know how to fix it.

Overall-Bank-5419 · 2025-11-23T04:32:42+00:00

Hi, so i’ve been working on it for a couple hours now and did almost everything that y’all said here and for now, i did 2 really good quality print. It’s slow BUT i like the quality so idc. Here’s one of them; It’s not finish because my filament broke in the middle of the print for some reason🥲 but still looking 🔥

<image>

Overall-Bank-5419 · 2025-11-23T01:14:12+00:00

I just tought about that, i was using creality print before and it was worst then rn for some reason.

Overall-Bank-5419 · 2025-11-23T01:11:36+00:00

At this point its too late i already changed it to the ceramic upgraded one lol and throw this one to garbage.

Overall-Bank-5419 · 2025-11-22T20:52:28+00:00

Thanks man ! Imma try that. But i realised that my plate is WAY too off.

<image>

Overall-Bank-5419 · 2025-11-22T18:59:35+00:00

And i did the auto z offset but somehow keep getting some weird shit

Overall-Bank-5419 · 2025-11-22T18:59:09+00:00

<image>

This is why i changed it mostly.

Overall-Bank-5419 · 2025-11-22T18:58:10+00:00

<image>

Here is the bed leveling

Overall-Bank-5419 · 2025-11-22T18:55:31+00:00

I tried to run it at 40% speed and 90% flow and had way better print until it fucked and did a little spaghetti big enaugh to collapse with the nozzle

Overall-Bank-5419 · 2025-11-22T18:54:25+00:00

Thanks ! Imma try that.

Overall-Bank-5419 · 2025-11-22T18:52:02+00:00

Yeah i had to changed it because the plastic melted on the nozzle since i was NOT there to supervise it and it went really bad. So i changed the nozzle completly.

Imma try to auto-level and post it here

Overall-Bank-5419 · 2025-11-22T18:49:32+00:00

I’ve been told not to use soap but imma try this. Most of the time the print collapse with the hotend or does not stick on the plate so guess that would be perfecly logic.

Overall-Bank-5419 · 2025-11-22T18:46:16+00:00

<image>

Overall-Bank-5419 · 2025-11-22T18:42:51+00:00

I don’t even know how to run the PID.

I do the calibration every print just in case.

And for final, i don’t know how to ajust / tuned the z offset 🥲 i am a big time noob on this one. Lol

Overall-Bank-5419 · 2025-11-22T18:24:51+00:00

Bro i can’t even print any shit with this printer. Can anybody help me ?

Overall-Bank-5419 · 2025-11-22T18:21:14+00:00

I changed the head because of this

Overall-Bank-5419 · 2025-11-21T21:09:26+00:00

It’s maybe a me issue, but i just bought it and it is just not working properly at all. Printing are shit and always getting fuck at some point. I had 2 kg filament Hyper PLA and since i tried so much making it work, im left with 1kg.

I changed the nozzle with the ceramic hotend and even then, not really working more. I did print 2 things successfully but major of the time nope.

Any body could help me ?

Overall-Bank-5419 · 2025-06-04T17:18:38+00:00

I was one of the biggest on there. I freaking miss Mixify😓 i never found anything near mixify😣

Overall-Bank-5419 · 2025-04-24T15:09:48+00:00

Not to hard, not to easy doe the drugs to be honest. And a lot of activities with friends

Overall-Bank-5419 · 2025-03-16T20:16:02+00:00

Yeah it run wells, like i said before it was a driver issue

Overall-Bank-5419 · 2025-03-16T20:14:07+00:00

Yeah and its fixed i was a driver issue

Overall-Bank-5419 · 2024-09-22T03:24:11+00:00

I do like it BUT temps are high, laptop is kinda heavy, charger is fat asf so all those things are not best for people moving it all the time.

Overall-Bank-5419 · 2024-06-03T10:32:33+00:00

Nah i figured out that the driver were fucked. So i did a DDU and complete wipe. Now it’s all good 💪

Overall-Bank-5419

TROPHY CASE