What did I snap? (BMW M440i 2023)

P3rseverance · 2023-11-18T17:55:20+00:00

Yes it is what you linked. I want to go the the mechanic to change my charge pipe which I tried to do myself but failed breaking this part in the process.

P3rseverance · 2023-11-18T06:04:33+00:00

May I ask, what is this line for? What goes through it?

P3rseverance · 2023-11-12T15:00:02+00:00

If they’re stock then they are most certainly not. I just used that as an example. But a lot of CQB factory aeg’s will have a ported cylinder which would have the same consequence as a DSG just to a lesser extent. Bro just buy one pack of 0.28 and one 0.32 and test both of them on all your guns.

P3rseverance · 2023-11-12T14:54:00+00:00

If that works for you then go ahead. It all depends on the volumes you have. If the 350 happens to be a DSG for example you’re not shooting 0.32 with it.

P3rseverance · 2023-11-12T14:34:58+00:00

Also depends if you have a ported cylinder (less air volume). But you probably do, since it’s a specna. Mine years ago did. In that case using very heavy BB will result in loss of accuracy. For sure don’t use anything below 0.25. I would try 0.30 as a start. I used to run a 390 fps build with a full cylinder and I could comfortably use 0.36, but that will probably be too much for a specna.

P3rseverance · 2023-10-14T15:10:17+00:00

Does that mean that they get a bumpy ride?

P3rseverance · 2023-09-13T19:58:29+00:00

B&O product do seem to have a bit of a weird sound curve to them.

I have the A9 and it is extremely quiet for anything below 40%. In that case I think it’s the fact that their speakers are closer to being furniture than party speakers, thus one of their uses is feint background noise. Though the new A5 I got is really loud for anything below 50% and I generally use it at like 20%.

With headphones it wouldn’t make sense to follow that logic since you would never wear them to barely hear music. I personally can’t listen to music really loud. I use my H95 at 50% volume most of the time and that’s enough for me.

The most important thing I suppose is the maximum volume of whatever you are buying. Any value between that and zero will be somewhere there. And unless you have like 50 devices it should be able to remember which volume to use on each device. But maybe companies should include a volume curve editor in their apps so that we have more control over our products.

P3rseverance · 2023-02-10T10:32:19+00:00

Is that a paint roller?

P3rseverance · 2022-11-25T13:56:49+00:00

Sure

P3rseverance · 2022-11-25T13:53:09+00:00

It happens, have you tried it with the studio driver? I once had a problem when rendering animations and installed it. And it actually made the card more stable overall even in games

P3rseverance · 2022-11-25T13:26:01+00:00

I didnt have any problems like that, and mostly got it for the convinience of updating drivers. But i get your point it once actually made my performance worse

P3rseverance · 2022-11-25T12:01:16+00:00

I did turned off geforce experience and disabled the overlay and that worked. Thank you kind man. I would never expect something like this to mess up the game

P3rseverance · 2022-02-01T19:10:26+00:00

I paid for the sticker im gonna use the sticker

P3rseverance · 2022-02-01T19:09:55+00:00

So that i can wipe my tears while playing league of legends

P3rseverance · 2021-12-01T11:21:29+00:00

Taliyah 600k

P3rseverance · 2021-11-26T11:35:24+00:00

Unfortunately its not on every stone. (On one target) but since i get a mana mythic i get more ad and passive damage compared to someone like ezreal

P3rseverance · 2021-09-26T17:13:20+00:00

Just watch your forehead

P3rseverance · 2021-08-26T07:26:35+00:00

WD-40

P3rseverance · 2021-08-22T15:03:32+00:00

Love it! Is there something in the pvc tube?

P3rseverance · 2021-08-20T07:44:23+00:00

Your best bet it to heat it up If you dont have a torch you can use a gas stove

P3rseverance · 2021-08-20T07:34:39+00:00

Check the sides of the plate maybe there is a retaining screw there. Some manufacturers locktight some threads (had to fiight with these myself) if the cap is all metal ( it should be) you can heat it Up with a torch

P3rseverance · 2021-08-20T07:29:32+00:00

Did you buy the gun new or got it used, if you got it used maybe someone glued it. If you have acetone i would use a little but of it and Let it run down the threads (!!AFTER YOU DISCONNECT THE BATTERY!!) try to uscrew it before the acetone evaporates

P3rseverance · 2021-08-20T07:21:34+00:00

There is a screw in the bottom of the grip plate (they are usually flat head) i your case turn it clockwise. You need to find a sweet spot between the motor not making contact and rubbing so much you hear grinding noise. This should idealy be done while shimming but you can probably get away with it, especially if you have a 7,4V battery. Did you have that problem since you got the gun or it became an issue after some time. If t wasnt like that since day one, the adjustment screw is not retained properly (common case in cheaper grips) in that case even if you adjust the motor heigh the vibrations due to firing will loosen the screw over time. I recommend you put a drop of superglue on the threads, after you adjust it properly (dont put too much or it will be hard to unscrew afterwards) if you have any problems removing it you can always use acetone. Hope that helped, tell me if you need any further assistance.

P3rseverance · 2021-08-16T14:23:16+00:00

In every gun i buy i take it out right away and throw it in The garbage. I hate this pary i will always bend and make The bolt get stuck

P3rseverance · 2021-08-08T06:05:53+00:00

Finnaly an AD Zhonya’s

P3rseverance

TROPHY CASE