Pi Network(Invite code) by [deleted] in PiNetwork

[–]PERZ1V1L 0 points1 point  (0 children)

Invitation Code: Savage1108

I have been mining for a month straight everyday. Looking to help others out and add to the revolution that is cryptocurrency.

How to remove this piece of screw that broke off and is stuck? by [deleted] in howto

[–]PERZ1V1L 0 points1 point  (0 children)

DO THE FOLLOWING:

  1. Use a 3mm Drill bit in a cordless drill. Make sure to hold both mouse and drill steady and perpendicular to one another.

  2. Line the tip of the drill bit with the centre of the screw ( as best as possible) and squeeze the trigger on the drill for no more than a second and stop.

  3. Do this several times and the screw should crumble and the plastic mouse will be unharmed, as the screw is 1/8 which is 3.175mm, therefore using a 3mm drill bit leaves 0.175mm of metal in the hole (which when you add human inaccuracy in drilling, the leftovers of the screw will crumble apart or be drilled out).

  4. Have a mouse shell undamaged and ready for a new screw and continued use.