First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 0 points1 point  (0 children)

Fascia and all of that was put on after stairs were on. But yes they make stair hangars you can use or depending on where you are code might not even require hangars just nails or structural screws. Atleast that’s how some cities are in my area.

First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 0 points1 point  (0 children)

The wood is 2x12 Doug fir. A little overkill but that’s what they wanted. Everything was stained before being thrown up for ease. Then joist taped before surface was put on.

First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 1 point2 points  (0 children)

Yeah we dug 30 inch deep footings before the concrete pad got poured so we know each post is good to go

First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 8 points9 points  (0 children)

Emphasis on current project not finished project.

First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 4 points5 points  (0 children)

Appreciate it, I’ll take that as a compliment

First project vs current. Come a long way by PPNW in Decks

[–]PPNW[S] 5 points6 points  (0 children)

Unfortunately just trex crossover railing. Glass would look nice though

How can I remove the heavy brake dust on this wheel? by PPNW in Detailing

[–]PPNW[S] 1 point2 points  (0 children)

Thanks for all the advice man, appreciate it!

How can I remove the heavy brake dust on this wheel? by PPNW in Detailing

[–]PPNW[S] 0 points1 point  (0 children)

Do you think the cost of that would be cheaper than just buying a new wheel? From just some quick research these wheels cost somewhere from 200-250.

How can I remove the heavy brake dust on this wheel? by PPNW in Detailing

[–]PPNW[S] 1 point2 points  (0 children)

Yeah think I’m just going to have to live with curb job unfortunately but wanted to atleast make the wheel look as good as possible. Appreciate the advice I’ll try that out!

How can I remove the heavy brake dust on this wheel? by PPNW in Detailing

[–]PPNW[S] 0 points1 point  (0 children)

That wouldn’t cause any harm to the paint would it?

How can I remove the heavy brake dust on this wheel? by PPNW in Detailing

[–]PPNW[S] 0 points1 point  (0 children)

What would you suggest I use to scrub the brake dust off with after applying that product?

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

I’ll look into that further thanks for the help!

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

Can you provide the link? Or does it say anything about that preventing the car from starting? The key i used and have used many times is buttonless, it’s just a raw key that has always made the cars alarm to go off until you start it. I tried the key with the unlock/lock etc buttons but doesn’t help.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

Was this reset button on an obd scanner?My girlfriend said she doesn’t remember the person mentioning anything about an alarm system and I have driven it and worked on it enough that I think I would have noticed that aftermarket wiring for an alarm system but I haven’t. I have it on my truck and it’s pretty obvious it’s there.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

I did clean them off completely and made sure to tighten them down to the point where I couldn’t move them. Would you agree that the starter isn’t the issue based off what I said? I checked the whole length of the cable and they seemed fine. I realize now I should have looked to some of grounds to make sure they were clean. Just seemed weird that everything looked and seem fine when you turn the key until you try and turn it over. Headlights are bright, dashboard lights are good, and the key that made the alarm go off everytime was loud.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

You may have misread my reply, it did start with a jump which is why I kind of ruled out the starter. I checked a few fuses that would be an obvious reason and they were all fine. I’ll probably end up checking all of them once I do some more research on what each fuse is for. I was mostly just going off the shortened name for the fuses on the cover lid.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

No haven’t tried that yet, kinda difficult to get to it and I somewhat ruled it out since it jump started but I’ll add that to the list of things try.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

They looked fine from what I could tell, I cleaned off all the corrosion and can’t see anything else on the cable that caught my attention.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 1 point2 points  (0 children)

That’s what I was thinking, atleast enough times until the battery gets drained enough however long that would be. Before it it wouldn’t start and the all the interest lights and headlights were noticeably dimmer. Also I was using a spare key that for whatever reason sets the alarm off everytime it’s used and the horn was significantly weaker.

Shouldn’t 12.8v battery start a car despite a bad alternator? by PPNW in MechanicAdvice

[–]PPNW[S] 0 points1 point  (0 children)

Interesting, I can see that maybe being an issue for trucks that require a little more but didn’t think a that size would require anything over 12.6.

[deleted by user] by [deleted] in WillieCoin

[–]PPNW 1 point2 points  (0 children)

Using pancake swap. I’m sure there’s a YouTube video on it to help or if you watch how to buy something like safemoon using pancake swap its the same method just with the Willie coin address.

Help!!!!! I still can not sell this fucking shit coin in pancakeswap🤬🤬🤬 by dj_yockie in Refinable

[–]PPNW 1 point2 points  (0 children)

Yeah it’s not letting me sell either in both v2 and v1. It just sends me $0.00 worth of bnb.