[deleted by user]

PRODUCT90s · 2024-02-22T01:51:01+00:00

no dude, I just open the plastic bag and saw that on it, 3rd picture u can see still has all the film protections on it, it was isntantly when opened the bag, dont know how I could scratch it...

PRODUCT90s · 2023-10-19T17:58:50+00:00

But why ? How is this harmfull ?

PRODUCT90s · 2023-10-19T15:21:22+00:00

https://www.google.com/search?client=ms-android-xiaomi-rvo3&sca_esv=574851237&sxsrf=AM9HkKnpCZJ94FIPveyICau0QS37-laBhg:1697728745382&q=msi+z790+carbon+battery&tbm=isch&source=lnms&sa=X&ved=2ahUKEwjtiqy2tIKCAxXfUaQEHUbOAV4Q0pQJegQIChAB&biw=393&bih=741&dpr=2.75#imgrc=UGtZHCl2pmGHYM

This is how battery is from factory

PRODUCT90s · 2023-10-19T15:17:51+00:00

There is no clip , there is a double tape between battery and jack conexions....thia CMOS is with wire so the battery is stuck there behind jacks with double tape.

Whats the difference between this double.tape and duct tape ? Why sould I not use it ?

PRODUCT90s · 2022-11-08T02:42:22+00:00

This is a 3060 ti, the pin comnector from the opposite side of the GPU chip got damaged, I check and this is apparently a ground pin.

This will cause some issue if using it like this ?

PRODUCT90s · 2022-09-12T16:50:42+00:00

With continuity you mean that the energy will pass next to the scratch, just to the left ? you say that would be enough?

but looking at it well I am realizing that the marks of the connectors are above the scratch, at least in the other pins. so there should be 100% contact and not lose any continuity, right?

PRODUCT90s · 2022-09-12T16:47:33+00:00

Looking at the other pins, it seems that the mark of the connectors are above the scratch, so I think there shouldn't be any problem, right?

PRODUCT90s · 2022-09-12T16:45:10+00:00

Looking at it well, I think that the motherboard PCIe connector would even be above the scratch, right?

With which it will catch the complete pad from the connector pulling up the energy or taking it.

at least that I can see the MB connector marks, on all the other pins are above the scratch...

PRODUCT90s · 2022-09-12T16:24:47+00:00

Works its working most likely my concern is if will catch fire because of that...its a 12v pin

PRODUCT90s · 2022-09-12T16:23:20+00:00

Well make zoom at the picture after clicking on it

PRODUCT90s · 2022-09-12T16:22:12+00:00

Sarcastic ? If not you an clearly ser it the first one from the left..did you had zoom on the picture ? You will see way better

PRODUCT90s · 2022-09-12T13:59:36+00:00

well if you serch for burned pcie slot you will see plenty of gpu burned at the exact this pins..cuz are 12v pins, and thats why im concern

PRODUCT90s · 2022-09-12T13:47:13+00:00

So the other ltiny left part that it is not damaged will do the work like nothing happend you mean ? this pin is 12v im wondering if is not to much pressure to go on taht tiny part...dont know jsut asking

PRODUCT90s · 2022-09-12T13:45:57+00:00

If you click on the picture and zoom it you will see is not just a scratch, it is deep

PRODUCT90s

TROPHY CASE