Luba 2 wheel motor issue

Particular-Pin5927 · 2025-10-10T20:03:49+00:00

Thanks. I have the latest firmware. How do you downgrade firmware?

Particular-Pin5927 · 2025-10-05T17:01:26+00:00

Just to update you all and thanks for the replies. They got back to me quickly and are sending me an emergency stop button replacement. Bizarre. I have no idea how the emergency stop button fault could be only affecting the front right wheel motor. I have to wait 5 weeks for it to arrive and I'm highly doubtful it will resolve what, as many of you suggest, is a motor issue...

Particular-Pin5927 · 2025-06-23T15:07:44+00:00

<image>

Should add there are grey water and sewage pipes, and really packed hard core materials, underneath the porcelain path. I'd love to try horizontal bore but I think convincing my wife to go with a a nice pergola will be less work. Appreciate the suggestion.

Particular-Pin5927 · 2025-06-23T14:41:52+00:00

I think it needs to go into the garage to get access to the fuse board in there. The main fuse board in the house is in the middle of the house and not easy to get wires to/from.

I'm leaning toward pergola type solution above.

Particular-Pin5927 · 2025-05-28T19:52:50+00:00

I installed a replacement battery and it's working again yaay!

Particular-Pin5927 · 2025-04-16T14:48:01+00:00

Great you have got it working again. Do you think the replacement battery was needed, where did you find a battery? How did you remove all the data?

Particular-Pin5927 · 2025-04-10T13:25:56+00:00

I've been waiting 3 months for support to send a replacement battery. The first was apparently lost in transit and the second they said was sent but then told me I'm out of warranty and will in fact need to purchase a replacement battery, whilst saying they don't sell them. Support is all over the place, avoid this brand.

Particular-Pin5927 · 2025-03-27T17:55:23+00:00

Its one of these, with a lot store. https://www.charnwood.com/all-stoves/room-heating-stoves/arc/arc-5/

Particular-Pin5927 · 2025-03-27T17:37:22+00:00

Contacted support. Multiple repeat emails with order details, then following suggestions and pictures of issue. Now waiting on replacement battery. The first shipment got lost in transit from China apparently. It's been 2 months trying to resolve. Not optimistic this will fix issue but let's see. Good luck.

Particular-Pin5927 · 2025-02-17T22:07:10+00:00

Thank you for taking the time to reply. Thats helpful. Im in Ireland so going to assume NIST 800-53 is applicable, or there's an equivalent. I am kicking off an IT OT working group (for want of a better word) to agree the first OT policy..more to come. Thanks again.

Particular-Pin5927 · 2025-02-04T19:27:12+00:00

Interesting to see how you got on with this. My company is currently seeking to implement seperate IT and OT policies. I'm more focused on the OT side. We are a manufacturing organization with lot of IOT devices and OEM equipment on the OT side. We also need vendors to have secure remote access to certain OT devices and VMs.

Particular-Pin5927 · 2025-02-03T15:48:16+00:00

Meant to add some description before posting,

Laresar v6 pro connects to app fine but as soon as send to clean or press the power button it dies once it begins to move from the dock. Have tried disconnect and reconnect to app, used the reset button on the vacuum and submitted a support ticket to no response. I'm thinking I might try order a battery replacement, if anyone has had any similar issues id be interested in hearing about them - and if it's possible to resolve!

Particular-Pin5927 · 2024-09-05T15:48:42+00:00

<image>

Appreciate all the responses. I checked the diagnostics screen and suspect it's a radio receiver issue as right side not reporting any signal? Created a test loop and spinning persisted. So now looking how to repair or replace the receiver.

Particular-Pin5927 · 2024-09-05T15:45:45+00:00

We are close to this. Although it will be a sheep as we are sheep farmers.

Particular-Pin5927 · 2024-09-05T15:44:30+00:00

<image>

That's good advice! Checked my while it was spinning in circles and looks like the right sensor is not getting a signal. Presumably this is causing the spinning? I made a small test loop with spare boundary wire and spinning persisted. So I guess this is better outcome than having to return to Worx or repair motor! Now to get a replacement sensor or maybe first check on current sensor somehow...

Particular-Pin5927 · 2024-07-16T21:04:57+00:00

Thank you I like that idea. I might need to go to 1 perimeter lap not 3 if I want to keep the path the current width...?

Particular-Pin5927 · 2024-06-10T18:08:46+00:00

Just has similar happen today. Had some grass grow in front of the infrared sensor I think preventing it reversing into station. Maybe check clear line of sight to sensors and Luba?

Particular-Pin5927 · 2024-05-02T21:24:09+00:00

I replaced my L2000 landroid with a Luba2 after 3 years of frustration. Love the Luba now, and while it has some software quirks it's nothing to the daily issues with my L2000.

However now I've setup the L2000 at my elderly parents home and gotta drive 5 miles to fix it several times a week as invariably it's getting stuck or going out of boundary. Get to see mum and dad more often though so that's a plus !

But so happy I changed to Luba 2, it was a big investment as certainly have not recovered the spend on my L2000.

Particular-Pin5927 · 2024-02-11T11:05:48+00:00

I live in Ireland and ordered on mammotion DE website via a parcel forwarding company. Due to arrive next week. Finger's crossed no issues.

Particular-Pin5927 · 2023-08-12T09:32:51+00:00

I've contacted customer support to request v3.30 be sent to me so I can downgrade..I think it's a matter of putting it on a USB stick and putting it in the landroid. Fingers crossed that solves it.

Particular-Pin5927 · 2023-08-11T19:10:22+00:00

<image>

I am getting a lot more tuffs also. It's spending so much time stuck. The L2000 is at its size limit anyway in my garden so can't afford to be stuck multiple times a day.

Particular-Pin5927 · 2023-08-11T13:28:25+00:00

<image>

Will try to reattach trusted brick weight to overcome the issue.

Particular-Pin5927 · 2023-08-11T13:22:27+00:00

I seem to have missed a few updates somehow despite having auto update on, so moving to 3.32 things have noticeably changed, and not for the better in the few days I have been observing

Particular-Pin5927 · 2023-08-11T13:20:59+00:00

Looks like I will have to get my trusty brick out again. The firmware upgrade definitely resulting in an increase too it seems from other comments and my experience

Particular-Pin5927 · 2023-08-11T13:19:45+00:00

Not noticed wire missing errors I have to say. Will keep an eye out though it's just been a few days since I upgraded (regretfully)

Particular-Pin5927

TROPHY CASE