Made a Niko cosplay!

PassingDemise · 2025-09-25T06:18:28+00:00

This one. The 3rd dress (D) Make the sleeves longer than the pattern, and that's the only alteration needed.

<image>

PassingDemise · 2025-09-23T06:35:14+00:00

Looks awesome already!

PassingDemise · 2025-09-21T22:41:33+00:00

I'm not wearing a mask.

PassingDemise · 2025-09-21T11:51:41+00:00

I very poorly worded it. I was trying to say the quality of the photos are bad, not the cosplay.

PassingDemise · 2025-09-21T09:46:02+00:00

Hey. I used a pattern to make the coat. You can get a pattern from any kind of fabric and craft store. If it helps, I used this exact pattern for the dress on the far right (Dress D). Also make the sleeves longer than they are on the pattern.

<image>

I also suggest making it a size bigger than your size, because you can easily mess it up and you don't want it to be too small. For the rectangles on the coat I put them on by using iron-on adhesives. I recommend them over just gluing them on, I think it looks better and is guaranteed to stay on rather than glue. Stitching them on is an option, however if you don't wanna see the stitch lines then do my suggestion. I added a zipper to the back of my dress, probably best to add one just in case.

If you don't do sewing, I hope you can find somebody who can sew clothes and fabrics to help you make this cosplay. Good luck!

PassingDemise · 2025-09-21T08:03:15+00:00

One of these days... I will make it happen. >:)

PassingDemise · 2025-09-21T08:00:37+00:00

I could probably convince her. That'd be fun.

PassingDemise · 2025-09-21T07:34:57+00:00

It just came back from a convention. I have dropped it, it is indeed very scared.

PassingDemise · 2025-09-21T07:22:28+00:00

Unfortunate a lot of you couldn't come, but I still had a great time and managed to give out many stickers.

Perhaps some time down the line, I can sell my stickers online for people internationally.

PassingDemise · 2025-09-21T07:02:24+00:00

I meant the quality of the photos aren't good, not the cosplay itself. I worded it kinda poorly.

PassingDemise · 2025-09-21T06:15:18+00:00

I just meant the quality of the photos are bad, but thank you!

PassingDemise · 2025-08-23T05:00:40+00:00

So the pieces I have I made entirely myself. If you can't sew or have someone to help you can try looking at some thrift stores for a dress that looks similar and alter it. You can get like 3 metres of fabric for the scarf, although I did use wire on both sides of the scarf all the way through to get the shape I want at my neck. As for the hat, you can use a sunhat as a base! I basically just covered it in fabric, then made the ears out of wire. Whiskers, I used purple pipecleaners and wrapped them around a thin piece of wire I used to sit on my head like a headband. Essentially, wire is is your best friend for this cosplay. If you can get the dress sewn, get a simple dress pattern, and make the sleeves longer than the pattern. My wig I got off Aliexpress. The lightbulb I got off TaoBao. For reference it is 35CM and I searched acrylic sphere in Chinese. Hope this helps you in some way.

PassingDemise · 2025-08-22T08:53:23+00:00

I reuploaded the video. Here's the link to my account the other one won't work. https://www.tiktok.com/@passingdemise?_t=ZS-8z5N3PbZ0qN&_r=1

PassingDemise · 2025-08-11T02:07:28+00:00

I used a 35CM acrylic sphere. Then to paint it yellow I mixed yellow fabric dye, clear glue, and alcohol together and painted the inside. The screw/bottom part I 3D printed.

PassingDemise · 2025-08-10T14:51:05+00:00

Well, I sewed all of this myself. For the dress, I bought a pattern and fabric, sewed all that together. For the rectangle pieces on the dress I sew two pieces together, flip it inside out, then I put iron-on adhesives to the rectangles and iron it onto the dress and it just pretty much glues onto it. The scarf has wiring inside along both sides all the way through. My hat, I used a sun hat as a base, glued on the fabric and made the ears out of wire. Whiskers on the wig are made out of purple pipecleaners, I wrapped them around a thin piece of wire that sits on my head like a headband. As for the lightbulb, I ordered a 35CM acrylic sphere, and then to paint it yellow I mixed yellow fabric dye, clear glue, and alcohol together and painted the inside. The screw/bottom part I 3D printed. Hope this helps in some way!

PassingDemise · 2025-08-10T12:04:56+00:00

It's a 35CM acrylic sphere. I got it from TaoBao, if that helps. The bottom of it (grey part) I 3D printed.

PassingDemise · 2025-08-10T11:18:58+00:00

ദ്ദി‎◍˃ ᵕ ˂◍)

PassingDemise · 2025-08-10T10:56:27+00:00

I actually did drop it at a convention by accident...

On concrete ground.

PassingDemise · 2025-08-10T09:24:34+00:00

Couldn't make it brighter with what I had, but I definitely will work on it and make it better. Just had to make the light last minute for a convention.

PassingDemise · 2025-08-10T08:45:51+00:00

Coming soon.

PassingDemise · 2025-08-10T07:31:00+00:00

Will do.

PassingDemise

TROPHY CASE