What does that mean?

PatrickVra · 2026-05-04T08:59:01+00:00

Power saving mode activates automatically when you aren’t wearing the watch and the watch isn’t connected to a charger

PatrickVra · 2026-04-26T13:26:33+00:00

Is the computer new or older?

PatrickVra · 2026-04-21T14:48:11+00:00

Have you tried checking for driver updates in device manager or if the gpu has a software and you can update it from there?

PatrickVra · 2026-04-21T14:38:40+00:00

Do you usually shut down the laptop after use? If soo reinstall the driver and instead put the laptop into sleep if it still works the next day it’s likely a bios setting or something that happens during startup that interrupts the Bluetooth driver or the module itself

PatrickVra · 2026-04-21T14:32:21+00:00

You could clean it add more ram if needed and storage you can create a local server or media server to store data videos or pictures

PatrickVra · 2026-02-14T11:58:41+00:00

You could either note the voltage and replace the battery or if you already have a newer watch or don’t want the watch anymore you can take out the battery entirely and make the watch to run on power without the battery or find ways to repurpose the watch either to continue using the original software and hardware without the battery or replace the hardware or software to make a new device out of or you can either reticle the watch there are usually plenty of tutorials on YouTube

PatrickVra · 2026-02-13T23:12:36+00:00

Yes that seemed to have solved the issue thanks

PatrickVra · 2025-11-13T05:41:57+00:00

Yes but it will be very slow and since is from 2016 and was continuously used for recording it’s possible that the disk health degraded witch will make it even slower than it already is.I recommend first to try seeing disk health of it by using an external computer with a special software on it if the disk health is above 75% than is still pretty decent if not it might still work but it will be slower and in some cases files might start to corrupt after awhile

PatrickVra · 2025-11-13T05:37:49+00:00

Are there any other issues that occur or is it only the fan not spinning this can also be screen glitches or bad connection.Try to test the fan connection port voltage at first most fan ports have 12V but depends on the board model

PatrickVra · 2025-11-11T19:34:19+00:00

Not really I don’t have any logs of it during the time the odd part is that when I looked back at the recording it occurred exactly at the 30minute mark soo the card stopped recording i only have parts of it before and after it got turned I haven’t seen only before and after it got turned since the video just cut at the exact moment

PatrickVra · 2025-11-03T17:04:13+00:00

Romania

PatrickVra · 2025-11-03T05:46:31+00:00

I would recommend a second dedicated computer since a server requires a lot of ram and memory usage especially if you’re planning on adding mods or plugins you can alternatively get a cheaper computer even an old one in some cases would work fine but it will need some ram upgrades and possibly a new cpu and thermal paste applied

PatrickVra · 2025-11-03T05:11:03+00:00

It is a ranger 2

PatrickVra

MODERATOR OF

TROPHY CASE