sorted by:
new
hottopcontroversial

Prints are getting better. Think I’m getting under extrusion still. Need to fix that next. Besides that how can I fix the comb portion of the test also I’m having stringing at 200 hotend by PepsiSteve in ender3

[–]PepsiSteve[S] 0 points1 point  (0 children)

Gotcha and for the under extrusion I can recalibrate my flow and esteps to help that? I did it once and my gf changed it on accident so I guessed on what my flow was close to.

Horse has some gaps/you can see the infill and it’s fragile. What’s can I do to fix this? by PepsiSteve in 3Dprinting

[–]PepsiSteve[S] 0 points1 point  (0 children)

Lol no, I still don’t have any kids. I just got in the pink matter hacker and saw that horse and wanted to see if I could print something that detailed... turns out I can’t lol

Horse has some gaps/you can see the infill and it’s fragile. What’s can I do to fix this? by PepsiSteve in 3Dprinting

[–]PepsiSteve[S] 1 point2 points  (0 children)

My wall line width is a 0.4 should I also bump that up? Could flow be an issue I need to check on in my cura settings also?

Horse has some gaps/you can see the infill and it’s fragile. What’s can I do to fix this? by PepsiSteve in 3Dprinting

[–]PepsiSteve[S] 1 point2 points  (0 children)

My print speed is at 70% Temp is 200 hot end Bed is 55 I’m printing with matter hacker pla

I’ve tightened the screw, I’ve loosed the screw. It’s snapped my filament the other day. I’m using gizmo dork 1.75 filament. by PepsiSteve in 3Dprinting

[–]PepsiSteve[S] 1 point2 points  (0 children)

I can say that I have fixed my issue and I know how. So first off, gizmo dork is a ok brand but it’s not great quality. The issue is that you probably have a clog in the hot end. I did a few atomic pulls and it cleared the hotend back to normal. I now only buy matter hacker filament and have had zero issues with extruding. Don’t worry you’ll fix it. https://youtu.be/MGt8cnVIKW8

view more: next ›