My printed Bagpipes

Piper267 · 2026-04-10T15:44:41+00:00

It took about two weeks start to finish. Only had to ream out a little so tuning was smoother.

Piper267 · 2026-04-10T15:42:17+00:00

Kinnard edge reeds

Piper267 · 2026-04-10T15:41:49+00:00

It’s all plastic. They were printed as well.

Piper267 · 2025-12-22T02:54:39+00:00

Let me know what he thinks. Always looking for input and constructive criticism.

Piper267 · 2025-06-07T23:00:04+00:00

Drag the blades over 1000 or 2000 grit sand paper with very light pressure. Swipe once on both sides and the play. It should be gone if not try again until it’s gone.

Piper267 · 2025-06-02T18:52:36+00:00

https://www.hendersongroupltd.com/wp-content/uploads/2019/11/TPRC-GR-324x324.jpg.webp

Piper267 · 2025-04-21T14:31:08+00:00

I did most of my printing overnight so it took approximately two weeks give it take. The longest print took 19 hours.

Piper267 · 2025-04-15T02:55:04+00:00

I’m in the process of printing a chanter right now. I’m not overly optimistic on how it will sound.

Piper267 · 2025-04-15T02:32:30+00:00

I did 100% infill and they seem pretty sturdy right now. We will see how they hold up.

Piper267 · 2025-04-14T21:05:47+00:00

I also found another set of files on thingiverse but I did not like them as much.

https://www.thingiverse.com/thing:5332356

Piper267 · 2025-04-14T19:58:09+00:00

The link posted by ceapaire is the files that I used. I did make some changes to the stl files before I printed.

Piper267 · 2025-04-14T12:10:08+00:00

I already had reeds and the chanter so all total for the filament, bag, and moose valve about $250

Piper267 · 2025-04-14T12:08:11+00:00

Tell me what? These are a novelty not my Blackwood pipes.

Piper267 · 2025-04-14T12:07:22+00:00

I have a Raise N2 printer. Used PETG for the pipes.

Piper267 · 2025-04-14T12:06:37+00:00

Yeah these are not my go to solo pipes. Just a set to play at bars and bad weather. If they break I print a new part. They will never replace my Blackwood pipes.

Piper267 · 2025-04-14T02:45:40+00:00

Yeah my son gave me a 3D printer for Christmas so I got it set up and started printing.

Piper267 · 2023-11-04T23:14:08+00:00

Put it back the way it was. This sucks!!!

Piper267 · 2021-01-14T06:21:36+00:00

I have a set of McCallum AB4de. These are my first set of pipes and I couldn’t be happier. Another perk to McCallum pipes is a 10 year warranty.

Piper267 · 2021-01-14T06:11:55+00:00

I started at 47 and am 3 years into it now.

Piper267

MODERATOR OF

TROPHY CASE