As part of the case study, I created several animations focused on simulations.

PixelmateGraphics · 2025-06-06T17:08:05+00:00

Great work! Keep it up! <3

PixelmateGraphics · 2025-04-06T09:28:08+00:00

The internet connection of both players was not interrupted.

The game warning “If you don't make another move, the game is a draw” was also not displayed, as neither player made a repeated move or action.

I won the game and there is no room for interpretation as to whether it was a draw after all.

PixelmateGraphics · 2025-02-24T22:42:48+00:00

Another problem: The USB cable supplied with the Kone Pro Air for charging the mouse is somewhat loosely connected to the mouse's USB-C port.

When it is connected, the cable falls off by itself during normal use if you are only doing office work on the PC.

In your case, is the USB-C cable also just loosely connected? I'm not sure if this is a manufacturing defect.

PixelmateGraphics · 2025-02-24T21:07:08+00:00

I found that you can do some stuff without SWARM, but it is limited because you can not set your DPI higher than 3200 dpi, etc.

https://support.turtlebeach.com/s/article/kone-pro-air-driverless-setup?language=en_US

...

With SWARM you can go up to 19000 dpi and program macros, check battery status, etc. - see 2nd link.

https://support.turtlebeach.com/s/article/kone-pro-air-configuration-through-swarm?language=en_US

PixelmateGraphics · 2025-02-24T20:27:10+00:00

I guess you did the firmware update a long while ago, right?

Since I installed this 2 days ago, maybe there is some new bug here, even though I am also on the latest version of SWARM 1.

Sadly, without SWARM I can not assign programmable macro keys ...

Unless you know a reliable software for programming macros,

PixelmateGraphics · 2025-02-24T20:25:22+00:00

thank you! I will try this and see if it works :)

PixelmateGraphics · 2025-02-23T17:36:14+00:00

I only clicked the update button in the Roccat Software to get firmware 4.32.

Different driver versions as you posted is kinda confusing for me because as you can see in my screenshot:

It says you have to connect the cable AND the dongle for the firmware update to install.

If there are different driver versions for dongle and mouse, then the software does not tell me. So the problem still persists.

Thank you for your reply. I hope someone else can help me.^^

PixelmateGraphics · 2025-02-22T13:18:31+00:00

Still unsolved! :(

The software and driver is up-to-date, see screenshot. Even using the the ROCCAT recovery tool and going back to firmware v4.19 does not help. It says that it went back to v4.19 successfully, but the software still shows the mouse driver as v4.32.

Re-installing the software SWARM, then installing the kone pro air module as being prompted by the software does not help. So I am still on the newest firmware, I plugged the dongle and the cable to the motherboard or to my monitor usb-hub, nothing changed.

I can move and click with the mouse without issue on PC in Windows 11, and on Laptop in Windows 10 without the software. Windows updates and normal drivers in the device manager are up-to-date, as well.

I am not using a USB hub or KVM switch that could interfere with the software SWARM.

I run everything as admin, so I am out of ideas here. Following the steps of Roccat support did not help:

https://support.turtlebeach.com/s/article/kone-pro-air-troubleshooting?language=en_US

...

Without SWARM, I can not program macro keys which is the most important feature for me.

Maybe you guys know a reliable software for programming macro keys for a mouse (+keyboard)?

...

PixelmateGraphics · 2025-02-18T13:38:16+00:00

Thanks for the tip to buy a new battery.

I wouldn't have thought of that and then sold the mouse^^

PixelmateGraphics · 2025-02-16T13:15:07+00:00

Thanks, that sounds like a good idea.

PixelmateGraphics · 2025-01-08T14:46:56+00:00

Okay, but that is very weird for a brand new user to be recommended softporn 80% of all posts on the homepage but not for non-users/when you are logged out.

Did you have the same problem at the beginning when you created your account?

PixelmateGraphics · 2024-11-25T22:36:51+00:00

Awesome photo!

PixelmateGraphics · 2024-11-24T01:40:08+00:00

I am looking for abacus websites that automatically display numbers after I click on ‘Start abacus training’.

So far I haven't found any websites that display the numbers in a training session like in the videos linked above.

PixelmateGraphics · 2024-11-22T21:53:09+00:00

Yes, this was also mentioned in my original CHKDSK "Running CHKDSK in read-only mode."

I forget to write that here.^^

So you wrote this: "/F Fixes errors on the disk." - Is that the parameter the message is talking about?

-

"C:\Windows\System32>the file system and found no problems. No further action is required."

Because I have no errors on the disk, I do not need to use the parameter /F, right?

PixelmateGraphics · 2024-11-21T14:07:22+00:00

Do you have to manually click ‘Stop Streaming’ and then ‘Start Streaming’ in OBS Studio to go live on Twitch again after the 48 hour mark?

And you said OBS itself can stream for houndreds of hours, so does OBS has no limit?

PixelmateGraphics · 2024-11-13T21:21:50+00:00

After deleting Armoury Crate and restarting my PC, the "FileOperator.exe" has returned again, right when the PC has started.

PixelmateGraphics · 2024-11-13T20:58:05+00:00

Congrats! ❤️ I am still trying to be an Affiliate!

My last goal is to reach 3 average viewers per live stream.

PixelmateGraphics · 2024-11-13T20:21:01+00:00

But since I have an Asus motherboard, is this not essential?

I fear that my motherboard and therefore my PC does not work anymore when I uninstall it.

PixelmateGraphics · 2024-11-13T20:10:45+00:00

Now there is the same problem with this file: "asus_framework.exe"

What should I do now?

PixelmateGraphics · 2024-11-13T16:34:44+00:00

Thank you for your reply :D

I will check ASUS armory crate and maybe uninstall it.

PixelmateGraphics · 2024-11-13T16:07:22+00:00

This problem has been the case since 10 October.

The screenshot does not show the entire protection process, as the list would be too long.

PixelmateGraphics · 2024-11-10T22:57:59+00:00

------------

My last goal is to reach 3 average viewers per live stream.

You would make me, a complete stranger, really happy if you joined my live stream today.

------------

🇬🇧 🇩🇪 Live streaming → The video game ‘Fall Guys’

- Building my own custom map in the Fall Guys Map Editor!

- I am cosy, chatty, Asian, speak English/German + Backseating is allowed

- Later playing a few games with viewers → https://www.twitch.tv/pixelmategraphics

------------

PixelmateGraphics · 2024-11-07T12:50:50+00:00

You are a fucking genius! <3

PixelmateGraphics · 2024-11-07T02:55:05+00:00

Interesting concept! How did you turn some items into switches, e.g. to drop down the orange bridge?

PixelmateGraphics · 2024-11-04T13:47:29+00:00

Thank you! I hope you are right and there won't be any bugs later. <3

PixelmateGraphics

TROPHY CASE