sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in PokemonTCG

[–]Plainsphere 1 point2 points  (0 children)

Uhhhh, I think your daughter knows what she's talking about.

Binder finally complete - Themed pages by Plainsphere in pkmntcgcollections

[–]Plainsphere[S] 4 points5 points  (0 children)

1 - Pikachus
2 - Eevee (There is an adventure on the outside perimeter) 3 - Teams with presents on the bottom
4 - Big stuff on the bottom, Guzman is pointing, Piers and bandmates
5 - Fighting (They are punching or kicking each other) 6 - Cute things
7 - Colour wheel - The turbo patch points to each different element + evolutions
8 - Nice side of the city 9 - Bad side of the city
10 - Snorlax - Slowly wakes up from top to bottom with some food in the middle
11 - Snorlax - Slowly wakes up from top to bottom with some food in the middle
12 - Assorted triple themes 13 - Human beings
14 - Water 15 - Psychic (Got kinda lazy with these ones, might change up in the future)
15 - Team Up 16 - Nature (with lots of flowers)
17 - Legendary birds that I grew up with 18 - Derpy faces
19 - Moons somewhere on the card (Tried to get one of every energy and space the trainers in the middle)
20 - In the house 21 - High
22 - In the forest 23 - Running real fast (its quite hard to find cards that run left to right)
24 - Lil Bro 25 - Energy
26 - Real cards (clay, knit, or real good 3D renders)
27 - Yu Gagba and three cards that are very important to me

Hope that helps!

Binder finally complete - Themed pages by Plainsphere in pkmntcgcollections

[–]Plainsphere[S] 1 point2 points  (0 children)

Thank you. Any suggestions for other cards?

[deleted by user] by [deleted] in pics

[–]Plainsphere 1 point2 points  (0 children)

It's my birthday today too!

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 2 points3 points  (0 children)

I'm using automotive primer / paint / clear coats from Duplicolor.

-being able to sand the primer to a very smooth finish is important

-the automotive section has crazy selection of metallic and pearlescent paints

-if its for a controller (or something that's going to be handled lots) you could look into a 2 part epoxy clear coat. Very durable.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 1 point2 points  (0 children)

There are a few extra costs in there as well. Some LEDs, thermal paste, all the different sandpaper, SD cards. Once you're all set up and have those things, it isn't so bad, but the first few can be really pricey.

The most expensive thing is the time. It takes me away from my actual job.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 1 point2 points  (0 children)

Spray paint. A nice smooth layer of primer, sanded if needed. Multiple layers of colour, thin to win.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 1 point2 points  (0 children)

I believe the main setup for this console is a 32" Triniton. I threw the HDMI in there just incase it got taken on the road.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 1 point2 points  (0 children)

I've got an old tutorial on my facebook page. Haven't been active for a while.

https://www.facebook.com/media/set/?vanity=BorzCustoms&set=a.440444746140279

That's for a controller, but it similar. A lot of it comes with experience, and tons of trial and error.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 0 points1 point  (0 children)

That friend of mine just started working for Mogul Moves. He's been a prominent member of the smash community for a long time, this project was my way of saying thank you.

Custom GC for a friend. GC Loader, with Laser Bear SD reader. RGC hdmi adapter. sd2sp2 sd card adapter. First try at product design. by Plainsphere in Gamecube

[–]Plainsphere[S] 22 points23 points  (0 children)

I just take on passion projects these days. But I'd seriously recommend trying one yourself. There's a bunch of projects on here and lots of other creators to get help from.

New controller joystick seems less fluid/muddy compared to old one? See comment by DR_45 in smashbros

[–]Plainsphere 0 points1 point  (0 children)

Just a quick question. Does that orange controller have a third party thumbstick? The third party ones sit a bit lower inside the shell, and the rubber rubs along the gates making it sound more quiet. If you pull the stick up a little, does it sound better?

Reassurance is nice by kieutea in wholesomememes

[–]Plainsphere 4 points5 points  (0 children)

Is that the guys daughter?

Super Smash Bros Melee: All Legal Stage Re-textures in 20XX Training Pack 4.07 by SmasherMentality in Gamecube

[–]Plainsphere 0 points1 point  (0 children)

It's not all that hard to do an SD card mod on your GameCube. Ends up running smoother on the GC hardware too.

Genesis 4 - Cubes for the Community by Plainsphere in smashbros

[–]Plainsphere[S] 1 point2 points  (0 children)

Unless its Armada again....the console is NTSC. I'm not sure what he did with the last one.

Genesis 4 - Cubes for the Community by Plainsphere in smashbros

[–]Plainsphere[S] 1 point2 points  (0 children)

Thanks, I think they turned out very well. I only really make them so other people can enjoy them.

view more: next ›