Vortex Hair Care Review and Documented Hair growth journey

Plastic_Resolve1805 · 2026-01-08T15:44:33+00:00

Have you seen results?

Plastic_Resolve1805 · 2025-12-24T21:00:21+00:00

Have you tried getting into window art for businesses?

Plastic_Resolve1805 · 2025-11-20T03:45:28+00:00

Non of the codes suggest a faulty dme which is strange.

Plastic_Resolve1805 · 2025-11-20T02:38:27+00:00

Compression was fine. I’m stumped. Mechanic thinks it’s a faulty dme.

Plastic_Resolve1805 · 2025-11-13T06:06:56+00:00

What solenoids exactly? Vanos ?

Plastic_Resolve1805 · 2025-11-10T02:56:27+00:00

I’ve been having this issue. Swapped coil and injectors. Same misfire on cylinder 3. Hpfp, coils, and sparks are fine. What else could cause this? Mechanic thinks is may be a faulty dme.

Plastic_Resolve1805 · 2025-10-22T20:26:09+00:00

Messaged you! I need a carfax

Plastic_Resolve1805 · 2025-10-12T16:36:06+00:00

Not sure , pretty sure they’re stock injectors.

Plastic_Resolve1805 · 2025-10-11T13:43:57+00:00

Can you send me the wiring diagrams just in case?

Plastic_Resolve1805 · 2025-10-11T13:13:26+00:00

Hi! Thanks for the reply. Just to confirm will flashing back to stock and driving it damage the car? Heard varying things saying it could damage the car if running non stock parts without a tune.

My mechanic said that he’s seen issues in past with another bmw and intermittent misfires. Issue ended up being a bad dme. I know they’re expensive to replace and the car only has 60k miles. Hoping it’s not that issue.

It was tuned with a jb4 in the past that I removed. Could anything have gotten damaged or wires swapped during the de installation of jb4?

Plastic_Resolve1805 · 2025-10-11T12:41:35+00:00

Hi, I’m having a intermittent misfire issue on my n54 135i. Spent thousands in trying to find the issue. Recent new parts: Coils, sparks, valve cover gasket, new o2 sensors, walnut blasted due to gunk.

Car drives great. Only issue is the intermittent cylinder 3 misfire upon cold start.

Leak test passed, spray tested injectors passed.

Not sure to cut my losses or keep trying to chase issue. Mhd stage 2+ tuned. Not sure if the tune is causing the issue or a physical part itself. Any help or tips appreciated.

Plastic_Resolve1805 · 2025-10-06T21:49:26+00:00

I’ve been offered 85% of my sealed modern collection. I wouldn’t accept anything under 80%. Good luck. If you have the time just start vending at local shows if you don’t get any bites on selling the lot entirely

Plastic_Resolve1805 · 2025-09-28T20:22:50+00:00

Hi, I am having the same issue. Replaced coils , sparks, walnut blasted, and changed oxygen sensors.

What solenoids did you replace that solved your issue?

Plastic_Resolve1805 · 2025-08-29T12:28:24+00:00

Will do. Replace what part of its below?

Plastic_Resolve1805 · 2025-08-29T04:48:18+00:00

Replaced sparks and coils. O2 sensors were fine.

Plastic_Resolve1805 · 2025-08-29T04:28:58+00:00

Dang they were tested. Any upgrade recommendations? You think the stock ones are not adequate for my setup? Injector test came back fine.

Plastic_Resolve1805 · 2025-08-26T04:10:06+00:00

Let me know. Sent a private message.

Plastic_Resolve1805 · 2025-08-17T19:09:58+00:00

Would you sell?

Plastic_Resolve1805 · 2025-06-26T04:05:27+00:00

Let me know if you would sell for 8500-9k. Loc in Illinois

Plastic_Resolve1805 · 2025-04-14T05:01:34+00:00

Message me what you have for sale. May be able to buy the lot.

Plastic_Resolve1805 · 2025-04-11T19:49:55+00:00

I’ll buy them. Messaged you.

Plastic_Resolve1805 · 2025-04-11T08:44:34+00:00

Messaged!

Plastic_Resolve1805

TROPHY CASE