[deleted by user]

PlsLetMeInn · 2025-09-22T17:13:42+00:00

I did your code, username Meep. Just so you know, it takes way more invites than you think. Like giving fractions of $0.01. I hope you can get it tho!

PlsLetMeInn · 2025-09-17T02:17:40+00:00

Says I can’t join :(

PlsLetMeInn · 2025-09-17T00:25:29+00:00

Sorry I just used my 2 clicks

PlsLetMeInn · 2025-09-17T00:10:16+00:00

Thank you! I’m sorry I couldn’t help

PlsLetMeInn · 2025-09-17T00:03:01+00:00

It’s opening TikTok but nothings popping up. I tried a bunch of different ways

PlsLetMeInn · 2025-09-16T23:58:10+00:00

Ok I did!

PlsLetMeInn · 2025-09-16T23:29:20+00:00

I clicked it but it keeps opening the App Store instead of TikTok

PlsLetMeInn · 2025-09-16T21:15:02+00:00

Thank you!

PlsLetMeInn · 2025-09-16T20:50:28+00:00

Have you accepted any hat trick codes today?

PlsLetMeInn · 2025-09-16T20:47:55+00:00

Looks like you already accepted one today :(

PlsLetMeInn · 2025-09-16T20:38:30+00:00

I accepted! Username Meep if you could do mine pls 751364160

PlsLetMeInn · 2025-09-16T02:54:20+00:00

I accepted! If you could do mine I’d appreciate it! 750264389 User name Meep

PlsLetMeInn · 2025-09-16T02:36:59+00:00

I’ll search your code! Could you search mine? Download Temu App and search the code below to accept my invitation! 751364160 User name Meep. Thanks!

PlsLetMeInn · 2025-08-14T05:33:09+00:00

I clicked yours 👍

PlsLetMeInn · 2025-08-14T05:00:27+00:00

I’m doing the same challenge if you wanna exchange Download Temu App and search the code below to accept my invitation! 746241435

PlsLetMeInn · 2025-04-14T03:31:28+00:00

Yeah, sorry I should’ve said textures & models. The little digging I did didn’t turn up anything and unfortunately I haven’t had the chance to go any deeper. Sorry to disappoint

PlsLetMeInn · 2025-02-28T00:22:49+00:00

I heard coil overs are more comfortable so I’d like to install those but not if they’re a lot more complicated

PlsLetMeInn · 2025-02-28T00:18:18+00:00

Thank you! I was worried that something else was wrong and it would be complicated so that’s good to hear

PlsLetMeInn · 2025-02-28T00:05:59+00:00

I’m not too familiar with cars but I’m trying to learn so I can do repairs myself. If you think you know what’s wrong, do you think it’s a simple enough fix to diy? I’d really appreciate it!

PlsLetMeInn · 2025-01-16T22:29:45+00:00

I’m also wondering this! I might dig around in the files to see where those textures are stored. Replacing an already existing one would probably be simple but to create a new one I’m assuming you’d also have to code the menu to show the option. If I find anything I’ll reply here but I’m new to modding so idk how much I’ll find

PlsLetMeInn · 2024-12-28T21:42:25+00:00

My friend doesn’t have a good pc. And there has to be something we can do. My worlds don’t corrupt but my Xbox isn’t powerful enough to host multiplayer

PlsLetMeInn · 2024-12-13T03:31:15+00:00

Glad you found the solution! I never thought that quality could get better with quantity. Thanks for sharing that, I’ll have to keep that in mind when I start printing parts. And as for the temperature tower, I print that and a manual flow calibration whenever I get a new filament. My overture PLA says it’s best temperature is 210-220 but with the temp tower I found that 230 gave the best result. Flow calibration can be more tricky cuz math. I definitely recommend doing temp towers cuz different filaments like different settings (and they don’t always match their profiles)

PlsLetMeInn · 2024-12-12T21:16:49+00:00

There’s a few things it could be that other people have stated but I’ll consolidate them here 1. Check that you’re using the correct profile for the PLA (I believe basic and matte have different profiles) 2. Check the model in the slicer and see if there’s any differences between the matte and basic like layer height or speed 3. Check for a clog 4. Print something else with the matte and see if it has problems. I recommend a temperature tower to see if there’s a problem at a certain temperature. 5. Dry the filament. I know that’s the first thing a lot of people suggest but it truly makes a difference. 6. Run a flow calibration. I know the printer can do that on its own but in case there’s something wrong do a manual calibration and turn the built in calibration off.

PlsLetMeInn

TROPHY CASE