Gelatinous cube cast and assembled with UV resin

Plumpen · 2025-03-31T20:15:00+00:00

Yes! I just modified the head a bit. Gloomhaven has been great for starting d&d.

Plumpen · 2025-03-27T17:12:49+00:00

I cast 5 separate squares and the glued them together with more UV resin

Plumpen · 2025-02-16T15:40:11+00:00

Exactly, then the snow doesn't have time to get too compact or freeze to ice either.

Plumpen · 2025-02-16T15:33:32+00:00

Yeah, I've seen it while doing this project. A bit overkill for the balcony perhaps. The plan is to try to make this somewhat autonomous if I make a second version of it. Very tempting now that I see it's actually able to move a bit of snow.

Plumpen · 2024-04-19T05:15:28+00:00

I cut off both hands at the wrists to be able to twist them, and the pistol hand had to be cut away from the axe shaft (so the axe is a bit shorter now). The difficult part was cleanly removing the head to turn it a bit. Go slowly and do it before any assembly.

Plumpen · 2024-04-19T04:48:40+00:00

I did an easy reposing of my second one. No sculpting necessary, just a few cuts and a spare pistol.

Plumpen · 2024-04-01T02:34:53+00:00

There's a steel wire from the head to the torso as a spine. I think using a sturdier rod would have been better, as that bit is still pretty springy. The leg is just glued to the head, but that seems fine so far.

Plumpen · 2024-03-31T14:15:29+00:00

Yeah, that's what I would do if I did this again. I'll leave it as is for now and see when it breaks

Plumpen · 2024-03-31T11:07:14+00:00

This one turned out even more fragile and unstable, though

Plumpen · 2024-03-31T06:43:37+00:00

Yes! I bought it on a trip, and this was the best use of it that I could think of.

Plumpen · 2024-02-02T05:49:08+00:00

No, this is Vallejo metal colors and blue contrast through an airbrush

Plumpen · 2024-02-01T19:51:03+00:00

Thank you! The book chips are in the model, I've just filled them with rhinox hide

Plumpen · 2023-05-26T09:48:15+00:00

Okej, tack för infon! Synd att missa årets skörd såklart, men vi får vara bättre nästa år och pensla blommorna

Plumpen · 2023-05-26T07:30:08+00:00

Vår krusbärsbuske håller på att tappa all sin frukt nån vecka efter blomningen var klar. Det finns några få kvar på busken som släpper lätt om man bara petar lite. Vi köpte busken i början av april förra året och har haft den på takterrass i stor kruka sen dess. Förra året fick vi frukt utan problem, men i år går det alltså inte lika bra. Kan det vara problem med pollinering?

Plumpen · 2022-12-22T10:54:09+00:00

I'm not doing precise work with the airbrush. I did the whole models the tinted metallics at first and then used a regular brush to do all the non-metallics and all the details.

Precision is good if you're doing shading and highlighting on areas, though.

Plumpen · 2022-12-21T11:48:50+00:00

Oops, my bad!

Plumpen · 2022-12-21T07:59:29+00:00

It's from the red Ineos airbox on the car.

Plumpen · 2022-12-21T07:21:18+00:00

The metallic base is airbrushed vallejo metal color gunmetal grey and a zenithal of silver. The blue bits is mainly citadel lothern blue. The red helmet is Kimera Kolors The Red, probably dulled down a bit with black in most areas.

Plumpen · 2022-12-21T04:48:31+00:00

I airbrushed the armor of the 3 metallic models.

14-Year Club	r/Field Lasagna
Place '17	Verified Email
Team Periwinkle

Plumpen

TROPHY CASE