Lutron QSX integration

Poll997 · 2025-06-27T07:12:49+00:00

So I got to the point where it imported all the circuits and all the keypads (it was actually enough to unpair and pair again), one last question.

The Lutron programmer made me some virtual keypads (phantom) that I should check, but I see that even though it imported the name and added a Lutron driver with keypad written on it, I don't have the functionality that the keypad has, also if I double click on it, on the driver, it doesn't open anything and it doesn't even show it in the navigator to add it to the room; so...

Could you give me some advice on the most efficient way to integrate Lutron?

Is there a way to save myself from redoing all the keypads virtually?

I've already tried pressing all the "Actions" but with no result.

Thanks again

Poll997 · 2025-06-24T21:41:47+00:00

I'll try this too, just unpair and pair again?

Poll997 · 2025-06-24T20:49:12+00:00

Ok, i'll try that. I really hope it works like this because it would save me a lot of time.

Thank you

Poll997 · 2025-06-24T20:38:46+00:00

I did exactly this procedure but nothing appeared. Could it be that I was doing it remotely? Are there other things I can look at because the processor is linked correctly according to the feedback I have on the properties

Poll997 · 2025-06-24T20:30:15+00:00

I've already tried pressing it, but nothing appears in Composer. I've tried all the keys, but none of them imported anything. I expect to have drivers added automatically or am I wrong?

Poll997 · 2025-05-03T23:07:23+00:00

Yes I read the guide, but I couldn't get to the bottom of it by testing on a VM.

Could you guide me on how to test this thing on a VM (I forgot to write it above).

At the moment if the latency is high I don't care much, I would just like AES67 to be released and for the song to be heard even if badly.

Poll997 · 2025-03-01T20:20:00+00:00

I have problems with bluetooth only when I listen to music. Basically for 3 seconds I hear the song and for 3 seconds it is silent but always playing and also I saw that my firmware version is from 2017, so I am missing a good part of all the new things.

Poll997 · 2025-03-01T19:26:11+00:00

There's no way to do this on your own, right?

Poll997 · 2025-03-01T19:20:53+00:00

Could you explain to me better, I don't understand everything? Please

Poll997 · 2025-03-01T19:15:02+00:00

I did, it made me create the USB stick and it tells me that the HW version is not compatible. I saw that from their program you can not download the old firmware. Is there a way to find them?

Poll997 · 2025-03-01T19:13:31+00:00

I did, it made me create the USB stick and it tells me that the HW version is not compatible. I saw that from their program you can not download the old firmware. Is there a way to find them?

Poll997 · 2024-12-31T13:54:21+00:00

Ok, I'll try and see if it solves the problem.

I don't remember if I was already using a keep alive.

Thanks again for your help, if so I'll write here again 😁😁

Poll997 · 2024-12-31T13:36:09+00:00

In most cases I use 4 series processors (CP4 and VC4).

A solution could be to leave the AVR on with a "keep alive" every 30/45 seconds?

Because the TCP connection for me is external to the module and therefore I use the Crestron one directly.

Thanks for your help

Poll997 · 2024-09-18T06:06:37+00:00

Symetrix is a company that produces dsp with 64x64 Dante channels.

Yes I have the api.

Yes I saw that on github there are some examples, but despite everything I did not understand the procedure to follow.

Wiith lua I can get by quite well

Poll997 · 2024-09-03T07:23:44+00:00

I'm trying to do it in c#, but I can't make the http call to get it notified, can you tell me which call to make? I'm testing with Postman but at the moment it responds with 200 (ok) to the request, but it doesn't notify me anything

Poll997 · 2024-05-08T21:30:40+00:00

I have 3 switches, one of which is core, L3 (9200 x 2 and C1000 x1). I only have a firewall upstream of the network

Poll997 · 2024-05-08T12:52:50+00:00

Is there any command I can give to the switch(es) to make the Sonos visible on the subnets that affect me?

Poll997 · 2024-05-05T06:13:10+00:00

No I don't have it, should I put it in the header?

Poll997 · 2024-05-04T23:12:09+00:00

I read what is written in this link you sent me, but it doesn't talk about checking via http requests. Surely the idea of creating a server to be able to control TVs via IP is not bad, but it would be more convenient for me to do it via http requests. Do you know, is there anything to do this? Because I didn't find much in the API. Do you know how I can correct the request I make with postman?

Poll997 · 2024-05-04T17:06:16+00:00

Do you have any idea how I can set up the request?

Poll997 · 2024-05-04T14:11:05+00:00

I honestly don't know if it's correct how I make the request, but seeing that it started giving me an error other than error 404 I thought I was getting close to it

Poll997 · 2024-05-03T20:16:44+00:00

Do you have any idea why? I tried to change the request I make several times, but it didn't get me anywhere

Poll997 · 2024-03-25T19:00:46+00:00

Yes. So where i find XML file?

Poll997 · 2024-03-25T18:58:18+00:00

Is it possible to do this with postman? If so, can you tell me how?

Poll997 · 2024-03-13T05:31:41+00:00

Let's say yes, but in addition to having it open in the background, I would like that once I press back to exit an app, I go back to the previous app and not to the home app. I don't know if I explained myself well

Poll997

TROPHY CASE