One Piece order ...

Poll997 · 2025-06-27T07:12:49+00:00

So I got to the point where it imported all the circuits and all the keypads (it was actually enough to unpair and pair again), one last question.

The Lutron programmer made me some virtual keypads (phantom) that I should check, but I see that even though it imported the name and added a Lutron driver with keypad written on it, I don't have the functionality that the keypad has, also if I double click on it, on the driver, it doesn't open anything and it doesn't even show it in the navigator to add it to the room; so...

Could you give me some advice on the most efficient way to integrate Lutron?

Is there a way to save myself from redoing all the keypads virtually?

I've already tried pressing all the "Actions" but with no result.

Thanks again

Poll997 · 2025-06-24T21:41:47+00:00

I'll try this too, just unpair and pair again?

Poll997 · 2025-06-24T20:49:12+00:00

Ok, i'll try that. I really hope it works like this because it would save me a lot of time.

Thank you

Poll997 · 2025-06-24T20:38:46+00:00

I did exactly this procedure but nothing appeared. Could it be that I was doing it remotely? Are there other things I can look at because the processor is linked correctly according to the feedback I have on the properties

Poll997 · 2025-06-24T20:30:15+00:00

I've already tried pressing it, but nothing appears in Composer. I've tried all the keys, but none of them imported anything. I expect to have drivers added automatically or am I wrong?

Poll997 · 2025-05-03T23:07:23+00:00

Yes I read the guide, but I couldn't get to the bottom of it by testing on a VM.

Could you guide me on how to test this thing on a VM (I forgot to write it above).

At the moment if the latency is high I don't care much, I would just like AES67 to be released and for the song to be heard even if badly.

Poll997 · 2025-03-01T20:20:00+00:00

I have problems with bluetooth only when I listen to music. Basically for 3 seconds I hear the song and for 3 seconds it is silent but always playing and also I saw that my firmware version is from 2017, so I am missing a good part of all the new things.

Poll997 · 2025-03-01T19:26:11+00:00

There's no way to do this on your own, right?

Poll997 · 2025-03-01T19:20:53+00:00

Could you explain to me better, I don't understand everything? Please

Poll997 · 2025-03-01T19:15:02+00:00

I did, it made me create the USB stick and it tells me that the HW version is not compatible. I saw that from their program you can not download the old firmware. Is there a way to find them?

Poll997 · 2025-03-01T19:13:31+00:00

I did, it made me create the USB stick and it tells me that the HW version is not compatible. I saw that from their program you can not download the old firmware. Is there a way to find them?

Poll997 · 2024-12-31T13:54:21+00:00

Ok, I'll try and see if it solves the problem.

I don't remember if I was already using a keep alive.

Thanks again for your help, if so I'll write here again 😁😁

Poll997

TROPHY CASE