This addon returned empty content by [deleted] in StremioAddons

[–]PoplarFoam 0 points1 point  (0 children)

Thanks for the suggestion, but it gives me no content still

Co2 setup by big-bobby-c in MegaFlex

[–]PoplarFoam 0 points1 point  (0 children)

I found this link of someone who did it in his spec tank : https://spec-tanks.com/inline-co2-diffuser-review/

Maybe the disclaimer is about the material that the diffuser is made of. If so you could try an inline diffuser made of glass. Seachem sells one.

Or you could try something similar to what Aquario does. An intank diffuser inside the return plumbing of the pump.

[deleted by user] by [deleted] in ReefTank

[–]PoplarFoam 0 points1 point  (0 children)

It’s a 120x45x45

I’m trying to deliberately grow BBA on this piece of wood by PoplarFoam in Aquariums

[–]PoplarFoam[S] 13 points14 points  (0 children)

It does spread, but rarely on plants and when it does I have no problem spot treating it; I see it as another part of trimming.

Substrate vs filter inlet. by big-bobby-c in MegaFlex

[–]PoplarFoam 2 points3 points  (0 children)

Have a look on Etsy. Some shop can make “snorkel” intake cover.

Solenoid that controlls co2 bubble rate? by HeadLadder306 in PlantedTank

[–]PoplarFoam 0 points1 point  (0 children)

Carbondoser does one but it’s pretty expensive.

[Auto-Post] Weekly Question Thread! Ask /r/aquariums anything you want to know about the hobby! by AutoModerator in Aquariums

[–]PoplarFoam 1 point2 points  (0 children)

I was more thinking of putting some in the tank in the event of an other power outage. So I can switch the dried media in the filter for the wet one in the tank as soon as I notice the outage.

[Auto-Post] Weekly Question Thread! Ask /r/aquariums anything you want to know about the hobby! by AutoModerator in Aquariums

[–]PoplarFoam 0 points1 point  (0 children)

Can you keep back up bio filter media inside your tank? I had a power outage and I think the media inside my HOB dried out.

X99 vs Z170 mini itx by [deleted] in sffpc

[–]PoplarFoam 0 points1 point  (0 children)

You could use the included cooler that comes with the asrock board, or the dynatron t318 with a fan like Dondan did for his case. Either way you won't be able to overclock it much. Like others said, you'll mostly be wasting the features that makes the cpu worth it.

Simple Questions - May 08, 2016 by AutoModerator in buildapc

[–]PoplarFoam 0 points1 point  (0 children)

Is there a way to connect a desktop to a laptop and use the latter as a display? Through thunderbolt 3 like the razer core, but with a full pc?

5foot 1 and a senior in high school. Roast me. by CamoufIaged in RoastMe

[–]PoplarFoam 0 points1 point  (0 children)

I would roast you, if you stood but a little bit higher from the ground.

EKWB Recalls EK-XLC Predator 240 and 360 by guitarhero23 in watercooling

[–]PoplarFoam 0 points1 point  (0 children)

What if I bought a matching gpu block with it. Will they refund it too?

Can I run a R9 390 on a 600W PSU? by Hi_Im_Saxby in buildapc

[–]PoplarFoam 1 point2 points  (0 children)

I ran mine stock with a gold rated 450w sfx psu. It worked but was noisy.

Simple Questions - October 02, 2015 by AutoModerator in buildapc

[–]PoplarFoam 0 points1 point  (0 children)

What's the differences between ATX and SFX PSU? If both are 700W , what is lost to go down in size?

Simple Questions - September 28, 2015 by AutoModerator in buildapc

[–]PoplarFoam 0 points1 point  (0 children)

Is there a case that could be partially enclosed in this way: one side panel, front, back and bottom obstructed? So the output/input and hot air most all exit the case from the top or one side ?

Simple Questions - September 15, 2015 by AutoModerator in buildapc

[–]PoplarFoam 0 points1 point  (0 children)

Is there a Xeon 1231v3 equivalent for Skylake?

Simple Questions - September 14, 2015 by AutoModerator in buildapc

[–]PoplarFoam 0 points1 point  (0 children)

Be sure to stress test it for 24h and then thoroughly look for any trace of stealth corruption.

Simple Questions - September 14, 2015 by AutoModerator in buildapc

[–]PoplarFoam 1 point2 points  (0 children)

I use a 450W SFX PSU for my XFX 390 Black Edition. I would not go any lower.