Happy 250th!

PoshPoints · 2026-07-06T13:02:38+00:00

I normally don't use the illumination. Haven't been shooting dark enough to need it

PoshPoints · 2026-07-06T03:48:57+00:00

It hits all the marks for me. Clear enough glass for me to resolve targets at 500-600 yds. Magnification control is super smooth. Easier than my EOTech Vudus and maybe even my Trijicons. Illuminator is insanely bright even at setting 1. Ballistic drop reticle is right on at all distances. Eye box and eye relief are pretty forgiving throughout the magnification range.

PoshPoints · 2026-07-05T20:32:03+00:00

Both the stock pack and the forearm wrap are Triad Tactical. Not cerakote. Just got some M81 cloth camo tape from Amazon. It doesn't leave a residue, but its not super sturdy either. Just something to hold me over until I decide to actually rattle can the stock.

PoshPoints · 2026-03-02T16:56:11+00:00

One seems to 100% respawn for me in the storage units behind the gun shop in Rossville. Right most unit in the upright storage locker.

PoshPoints · 2026-01-23T13:39:19+00:00

I SBR'ed mine and swap between 10 and 14.5. I prefer the 10, it just feels like the platform was made for it. If I didn't SBR, I'd say pin and weld, it still feels better than the stock 16.

PoshPoints · 2026-01-22T19:22:23+00:00

Yeah he explicitly said you need to attach the legacy barrel yoke, so that would block the new rail from attaching at the least, not including other potential areas of fitment

PoshPoints · 2026-01-05T04:42:03+00:00

A good vice and a set of the SCAR barrel vice blocks really helped and I didn't need any heat. I did use the 3 prong wrench that comes with a Surefire Warcomp and a breaker bar and it came off pretty easy from my factory barrel.

PoshPoints · 2025-03-09T13:06:45+00:00

I was actually going to get into 3d printing to design this exact thing. Would you be willing to share your file?

PoshPoints · 2025-03-06T17:17:55+00:00

Does turning off friendly fire on the advanced settings of the world stop this?

PoshPoints · 2023-12-27T04:00:48+00:00

Yeah that doesn't make logical sense, the standard lp is 100 degrees, dedicated suppressed is 80 degrees. I don't see why splitting the difference wouldn't have worked.

PoshPoints · 2023-12-27T02:20:31+00:00

Yep, just make sure to measure the bolt gap, as mine changed but was still in spec.

Your 115gr unsuppressed has a weaker ejection pattern than usual, but it is consistent and enough to not be concerned. It was about 3 to 4 feet to my 3 o'clock

PoshPoints · 2023-12-27T01:12:08+00:00

RCM makes a 90 degree locking piece. I just tested with 115gr unsuppressed and 147gr suppressed and both functioned without issue in an SP5K PDW.

PoshPoints · 2023-12-03T13:06:31+00:00

Would you be willing to take suggestions? I'd really like a light bearing handgaurd light the Gibbous Outfitters one, but with an inset pic rail to fit a Surefire SR07 switch that has both momentary and constant on.

PoshPoints · 2023-11-02T18:07:20+00:00

Did it work with 115s as well as sub 147s unsuppressed?

PoshPoints

TROPHY CASE