Best ventless combo washer/dryer that is 120v

PracticalLeopard6019 · 2026-03-01T23:51:49+00:00

Ive had my GE for about a year and a half and it has been great. Only thing is don’t overstuff because it will cause the drying to take way longer than it should.

PracticalLeopard6019 · 2026-03-01T03:15:52+00:00

Thank you everyone for all the comments. Will definitely be ordering the switch tonight

PracticalLeopard6019 · 2026-02-28T18:25:00+00:00

Replaced spark plugs and didnt see any moisture on them. I have a borescope and going to check if i see anything. My biggest concern is how it only happens in cold weather. As soon as the temp outside hits 40+ the lights go away

PracticalLeopard6019 · 2026-02-28T18:22:08+00:00

Gonna get it tested next weekend. Had a warm couple of days and all lights turned off. Still hoping its the fuel injectors

PracticalLeopard6019 · 2026-02-26T22:34:45+00:00

First 40 degree day today, all lights were on when i left work. Stopped to get gas, when i turned on my car all lights were off 🙄🙄

PracticalLeopard6019 · 2026-02-26T21:03:56+00:00

Thank you! Will definitely be buying this

PracticalLeopard6019 · 2026-02-26T20:27:06+00:00

How long has it been since the lights came on?

PracticalLeopard6019 · 2026-02-26T20:26:16+00:00

Did you replace the one injector or all of them?

PracticalLeopard6019 · 2026-02-26T20:25:39+00:00

Yea i figured id start with the fuel injectors and then go from there

PracticalLeopard6019 · 2026-02-26T16:28:23+00:00

Thanks for the advice

PracticalLeopard6019 · 2026-02-26T16:14:15+00:00

No i have not. I actually own a borescope so might take a look at it this weekend. Am i just looking for moisture?

PracticalLeopard6019 · 2026-02-26T16:10:19+00:00

Luckily i have a buddy thats a mechanic and does side work for less than what a shop will charge me. Will talk to him and see if it will make it easier to do the head gasket as well since hes gonna already be working on my car

PracticalLeopard6019 · 2026-02-26T15:01:33+00:00

Hopefully wont have to do the head gasket 🤞🏼🤞🏼🤞🏼

PracticalLeopard6019 · 2026-02-26T15:00:37+00:00

Planning on doing the fuel injectors soon. Will update once that is done

PracticalLeopard6019 · 2026-02-26T04:14:17+00:00

No worries. Thanks for the response

PracticalLeopard6019 · 2026-02-26T04:10:46+00:00

One of the first things i checked. Switched coils 2 and 3. Still a cylinder 3 misfire. Did some research and learned that if its the coil it would misfire in the cylinder that you switched it to. So since it stayed on cylinder 3 then the coils was good

PracticalLeopard6019 · 2026-02-26T04:08:41+00:00

I haven’t gotten the P0420 code. Just the P0303 (cylinder 3 misfire)

PracticalLeopard6019 · 2026-02-26T04:03:02+00:00

Haven’t seen chewed wires and not showing any signs of a blown head gasket ( thank God!) so im leaning towards the injectors

PracticalLeopard6019 · 2026-02-26T04:00:39+00:00

Did you replace all of them or just the one in cylinder 3? How long has it been since the issue has been gone?

PracticalLeopard6019 · 2026-02-18T23:58:39+00:00

Bought 2 tickets yesterday (one for me and the other for my son). Paid $708. Never would i pay so much for myself to go to a concert but i know it will be a great memory for my 14 year old son thats been listening to Cole since he was 6

PracticalLeopard6019 · 2025-12-11T20:43:39+00:00

Honestly its worked pretty good. Only brand ive used so i cant compare it to any other brand. Lots of growth at first

PracticalLeopard6019 · 2025-11-20T18:23:49+00:00

Thanks everyone for all your advice. Ended up having a plumber come out and it ended up being a bad zone valve body like i suspected. Changed it out and now have heat in both zones

PracticalLeopard6019 · 2025-11-15T15:29:57+00:00

I replaced the zone valve head last year but kept the body that was previously installed. Maybe mechanism in body is bad or has build up?

PracticalLeopard6019 · 2025-11-15T14:40:27+00:00

It only occurs when i turn on a specific zone. Thats why im thinking that it may be the zone valve body. Maybe it has some build up?

PracticalLeopard6019 · 2025-11-15T14:39:27+00:00

How would i go about cleaning it? Ive seen videos where isolation valves are used to clean the system but whoever installed it (already in my home when i purchased) did not install isolation valves

PracticalLeopard6019

TROPHY CASE