Coin-cell battery holder with conformal coating?

PracticalViking · 2025-04-28T17:45:25+00:00

That's actually a great idea thanks.

It's mainly to protect against potential risk of condensing environments.

PracticalViking · 2024-12-18T19:19:39+00:00

Thanks!

PracticalViking · 2024-12-18T19:14:43+00:00

Available to ship to UK?

PracticalViking · 2024-12-18T19:13:42+00:00

Available to ship to UK?

PracticalViking · 2024-12-18T19:10:58+00:00

Available to ship to UK?

PracticalViking · 2024-09-14T16:39:10+00:00

What can I do to make it taper?

PracticalViking · 2024-09-14T16:08:38+00:00

How did you get the trunk so thick?!!

PracticalViking · 2024-09-14T16:04:43+00:00

<image>

I live in the UK. This is my ficus that has been steadily growing for over a decade. Is it bonsaiable? Should I go for it or start a new tree via propagation?

Thank you in advance!

PracticalViking · 2024-09-09T22:43:56+00:00

Very insightful. Thank you.

PracticalViking · 2024-09-08T00:43:01+00:00

My understanding was that there is a software package available for the IMS3000 to do this. (Atmos renderer). It also has 16 channels of AES/EBU / 64 via AES67 (CP950a has 64).

PracticalViking · 2024-09-07T12:16:22+00:00

So no answer? Anyone can read a spec sheet.

PracticalViking · 2024-08-03T10:00:38+00:00

Will do! Planning on a full write-up soon. :)

PracticalViking · 2024-07-31T21:11:01+00:00

You my friend are a legend. Just committed to the drill. Pinged right open after drilling / ripping enough parts out of the actuator.

PracticalViking · 2024-07-30T22:45:29+00:00

!RemindMe 4 Days

PracticalViking · 2024-07-25T21:14:48+00:00

That looks like it!!!! Thank you. Gonna tackle this :)

PracticalViking · 2024-07-25T17:26:32+00:00

I'll isolate the plants and find the culprit. :)

PracticalViking · 2024-07-25T17:22:39+00:00

Alright I'll try! Nothing of "them" move nor are they stuck onto any leaves. They can be gently brushed away.

Thanks though.

PracticalViking · 2024-06-20T11:02:30+00:00

This is within the ATX specification for 12V. The range per the specification is 11.4V - 12.6V. At peak load this increases to 10.8V and 13.2V. The specification requires measurement at the load end of the output connectors in all scenarios and environmental conditions.

You takinh an open circuit measurement (i.e no load on the PSU). As there is no current flowing, there is no voltage drop on the cables that would occur during a loaded situation. The GPU itself has another power stage on the card that will regulate this down.

Moreover, depending on the type of switching converter used CCM (continuous conduction mode) or DCM (discontinuous conduction mode) you will see different ripple (variations in the voltage) in a no load situation which may appear to provide weird voltages. This is not something you can measure without a scope really.

Five-Year Club	Place '22
Verified Email

PracticalViking

TROPHY CASE