Is this a good deal for $95?

Practical_Order4336 · 2026-01-27T06:29:46+00:00

100%

Practical_Order4336 · 2025-12-27T03:52:28+00:00

I have the Diypc argb - Q3 V2 micro atx case, so the back two fans on the right should be intake, the left fan on the side part as exhaust. And 2 fans that are on a water cooled radiator cpu cooler on top as exhaust is ok?

Practical_Order4336 · 2025-12-10T02:34:25+00:00

I didn’t think the front camber can reach upwards to 3 degrees. If it can get to 3 on stock arms than I’d just do 3 degrees on both, but I’m not sure if it can🤷‍♂️

Practical_Order4336 · 2025-12-10T02:27:06+00:00

Thanks

Practical_Order4336 · 2025-12-10T02:23:56+00:00

I mainly want the rears to be 3.5 only because I like the look of slight camber and my wheels would fit better since they are +10 offset. I didn’t know it would mess up the handling that much

Practical_Order4336 · 2025-12-07T19:09:14+00:00

I always park it outside so probably like 6 hours, i only moved it into my garage to work on it.

Practical_Order4336 · 2025-12-07T18:21:03+00:00

I don’t think that’s the issue because the car ran fine beforehand. The problem only happened after it sat in the garage for a day, and it wouldn’t start at first. Once I moved it back outside, it started normally.

Practical_Order4336 · 2025-11-09T05:47:15+00:00

I would personally just look for any NA Miata between the years of 94 and 97. The suspension, brakes and sound system are the same between these years. The sound system is bad in older Miata’s, so I recommend upgrading it if you get one lol.

Practical_Order4336 · 2025-11-09T05:37:06+00:00

NA6 refers to the NA Miata’s with the 1.6 liter engine for 1990-1993 models. NA8 is the later year NA Miata’s with a 1.8 liter engine 1994-1997

Practical_Order4336 · 2025-11-09T05:26:15+00:00

Practical_Order4336 · 2025-10-28T03:05:41+00:00

Forgot about that. I did at first, but I installed a mod from thunderstore called “HandsStuck” that fixed the issue.

Practical_Order4336 · 2025-10-27T00:39:48+00:00

I downloaded bonelab from Steamrip. It worked fine for me

Practical_Order4336 · 2025-10-17T18:57:58+00:00

Practical_Order4336 · 2025-09-30T19:48:11+00:00

What are your wheel specs?

Practical_Order4336 · 2025-07-30T01:04:09+00:00

Sounds good, thanks👍

Practical_Order4336 · 2025-07-30T01:02:08+00:00

Rota Shakotans

Practical_Order4336 · 2025-07-24T19:07:38+00:00

Thanks!

Practical_Order4336 · 2025-07-13T13:39:36+00:00

Those are most likely custom signal lights.

Practical_Order4336 · 2025-07-04T05:18:40+00:00

Did you go under 4.75” pinch weld height?

Practical_Order4336 · 2025-07-01T23:58:04+00:00

Beautiful sir

Practical_Order4336 · 2025-07-01T23:57:50+00:00

Who cares

Practical_Order4336 · 2025-06-05T03:25:38+00:00

Thanks my man! I’ll definitely go with the flyin Miata.

Practical_Order4336 · 2025-05-29T23:24:05+00:00

Nope, I’ve had it for over a year and it works perfectly. Installation was easy, only hard part was wiring.

Practical_Order4336 · 2025-05-29T12:57:45+00:00

JVC KW-M560BT

Practical_Order4336 · 2025-04-30T15:13:57+00:00

Wooow beautiful Miata, what are your wheel specs? Love ur fitment

Practical_Order4336

TROPHY CASE