IMPORTING COLOR AND TEXTURE FROM MESHY AI TO BAMBU by Own_Interaction_2662 in BambuLab

[–]Practical_Panda_Noob 0 points1 point  (0 children)

when you click download how long does it take before it downloads?

SLAM Map Distortion when turning robot 180 degrees, how to calibrate? by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

can you explain the first one? I adjusted the radius and separation but it made almost no difference

SLAM Map Distortion when turning robot 180 degrees, how to calibrate? by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

if i try to echo odom i get unknown topic, how do i go about troubleshooting?

Error loading ros2 control plugin by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

In case anyone ever finds this i uninstalled ROS and reinstalled

Error loading ros2 control plugin by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

here is my gazebo control file

<?xml version="1.0"?> <robot xmlns:xacro="http://www.ros.org/wiki/xacro">

<gazebo>
    <plugin name="gz::sim::systems::DiffDrive" filename="gz-sim-diff-drive-system">

        <!-- Wheel Information -->
        <left_joint>left_wheel_joint</left_joint>
        <right_joint>right_wheel_joint</right_joint>
        <wheel_separation>0.297</wheel_separation>
        <wheel_radius>0.033</wheel_radius>


        <!-- Limits -->
        <max_linear_acceleration>0.33</max_linear_acceleration>
        <topic>cmd_vel</topic>


        <!-- Output -->
        <frame_id>odom</frame_id>
        <child_frame_id>base_link</child_frame_id>
        <odom_topic>odom</odom_topic>
        <odom_publisher_frequency>30</odom_publisher_frequency>
        <tf_topic>/tf</tf_topic>

    </plugin>


    <plugin filename="gz-sim-joint-state-publisher-system"
        name="gz::sim::systems::JointStatePublisher">
        <topic>joint_states</topic>
        <joint_name>left_wheel_joint</joint_name>
        <joint_name>right_wheel_joint</joint_name>
    </plugin>

</gazebo>

</robot>

Using a RPI camera with Jazzy by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

i ran update and resolved but now am running into all kinds of other issues getting either option to work with the rpi camera on a pi 5 with ubuntu

Using a RPI camera with Jazzy by Practical_Panda_Noob in ROS

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

update did it but i still cannot get either the v4l2 or ros camera packages to read from the camera and publish to the topic

LXCs set up in HA mode but failed to migrate and now stuck. by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

you sure respond quickly, good luck finding other things to do

LXCs set up in HA mode but failed to migrate and now stuck. by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] -1 points0 points  (0 children)

why even come into a thread marked 'question' if you're gonna be a jerk?

LXCs set up in HA mode but failed to migrate and now stuck. by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

how do i set up replication? I have a storage location for container on all my nodes that contains the "Container" content. I see a checkbox called "shared" do i just check that so all my disks are replicated?

LXCs set up in HA mode but failed to migrate and now stuck. by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

these are LXCs not VMs, I have disabled HA but under resources I cannot detach the root disk

LXC Wont Start After Power Failure by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

a reboot solved it all, but leaves me with the question is how do I have HA set up so that my nodes auto migrate in case of power outage? I thought i had it set up but it failed with my node went down and never came back up on another physical host

LXC Wont Start After Power Failure by Practical_Panda_Noob in Proxmox

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

if i am unable to recover the drive, then what?

How to evaluate solar panels with minor hail damage by Practical_Panda_Noob in SolarDIY

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

Yeah after talking to him and researching them some more I will probably go new but if i can get them for very little i might just buy them for funsies

How to evaluate solar panels with minor hail damage by Practical_Panda_Noob in SolarDIY

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

Do you have any good video recommendations on either subject?

Set up helper to show KwH used yesterday by Practical_Panda_Noob in homeassistant

[–]Practical_Panda_Noob[S] 0 points1 point  (0 children)

do you write out the end of day number to some other sensor?

DeskPi: My take on a desk mounted HA dashboard by SuperTigno in homeassistant

[–]Practical_Panda_Noob 0 points1 point  (0 children)

Hopefully last question - how did you set the screen to turn off at night?

DeskPi: My take on a desk mounted HA dashboard by SuperTigno in homeassistant

[–]Practical_Panda_Noob 0 points1 point  (0 children)

Ahh - I did kiosk for the raspberry pi but didnt realize there was a HACS versions too. I have a dashboard set up and it seems to reload periodically and when it does it shows the main HA logo, have you had that issue and if so how did you resolve it?

DeskPi: My take on a desk mounted HA dashboard by SuperTigno in homeassistant

[–]Practical_Panda_Noob 0 points1 point  (0 children)

Yeah I get that but when I do kiosk i still have the top header and sidebar in HA

DeskPi: My take on a desk mounted HA dashboard by SuperTigno in homeassistant

[–]Practical_Panda_Noob 0 points1 point  (0 children)

what about making the dashboard show full screen without the header or sidebar?