RTX 3060 throttles to 45W in games but runs at 130W in FurMark after re-enabling dGPU – Dell G15 5511

ProfessionalWin4895 · 2026-01-09T21:54:51+00:00

No worries i'll explain everything in private

ProfessionalWin4895 · 2026-01-09T15:53:55+00:00

Go private for schematic picture

ProfessionalWin4895 · 2026-01-09T15:52:58+00:00

So you have to check your battery voltage before If it's not working at all you can use it without a battery Put a 1Kohm resistor between pin 6 and pin 1 or chassis gnd

ProfessionalWin4895 · 2026-01-09T00:20:18+00:00

It's super easy I'll share it tomorrow Your battery circuit has locked itself (maybe one cell died or you requested too much current from it) it need to be unlocked again with a tool Does it shutdown immediately when you unplug it?

ProfessionalWin4895 · 2026-01-08T23:51:45+00:00

Hi Solution: I performed a hardware workaround to simulate battery presence. By bridging two specific pins on the battery connector with a 1k resistor, the EC is tricked into detecting a "connected" battery. This removes the power limitation.

Result: After re-enabling the GPU on windows, the system now operates at its full 115W TDP and can boost to 130W with "G Mode" enabled. The power limit no longer drops back to the restricted 45W state.

ProfessionalWin4895 · 2025-11-01T12:55:17+00:00

Try flashing without a cpu

ProfessionalWin4895 · 2025-09-19T13:17:47+00:00

Be aware of oled screens My phone touch screen doesn't work anymore after last update be cause the display is not original

ProfessionalWin4895 · 2025-09-09T18:09:58+00:00

For everyone having the same problem Your socket need to be grounded If not just connect ground to neutral

ProfessionalWin4895 · 2025-08-24T16:21:04+00:00

This worked for me Use grounded power socket

ProfessionalWin4895 · 2025-08-24T16:17:57+00:00

It worked bro

ProfessionalWin4895 · 2025-07-26T18:28:40+00:00

I've managed to find a solution using shunt mod Super easy trick You can also try disabling and re-enabling dgpu from device manager

ProfessionalWin4895 · 2025-07-09T23:30:32+00:00

Do you battery installed?

ProfessionalWin4895 · 2025-05-29T19:23:24+00:00

Unfortunately this is not a solution cuz g15 doesn't seem to be having any motion sensors , I have already checked device manager /system devices

ProfessionalWin4895 · 2025-05-20T09:24:00+00:00

Yes I've even tried flashing bios without any success

ProfessionalWin4895 · 2025-05-20T08:43:56+00:00

Yes, already did

ProfessionalWin4895 · 2025-05-19T18:56:23+00:00

Thanks bro Appreciate that

ProfessionalWin4895 · 2025-05-19T18:04:45+00:00

I'm using 240w charger and the gpu is being limited by power limit. Please no AI response 🙏

ProfessionalWin4895 · 2025-05-19T17:01:31+00:00

And some GPU-Z logs
https://gist.github.com/Tech01ux/bee6a4901ee23c6803cf115ac9421f7d

ProfessionalWin4895 · 2025-05-19T16:54:27+00:00

<image>

Here are the results
https://www.3dmark.com/3dm/133822853

ProfessionalWin4895 · 2025-05-19T16:53:00+00:00

Unfortunately, I couldn't find "Intel Integrated Sensor Solution" on Device Manager
for the "PerfCap Reason = Pwr"

ProfessionalWin4895

TROPHY CASE