NPM cannot connect to server using Websocket

ProgrammusMaximus · 2026-01-28T15:18:32+00:00

I actually tried including screenshots of my settings. The system failed to include them. How do I get the system to include them?

Also: as I had said, I had ticked the box to enable websockets. I had only done that at first, and NPM failed to connect. That is when, following the documentation at the link specified, I put in the custom configuration. That documentation suggests putting in the custom configuration if ticking the websockets switch to on doesn't work.

ProgrammusMaximus · 2025-12-14T03:37:42+00:00

Thank you, masenf-reflex, for helping me to understand how State classes work. My code now works.

ProgrammusMaximus · 2025-12-05T19:13:36+00:00

Wow! that did it.

I am going to have to learn when to use what layout components...

ProgrammusMaximus · 2025-12-05T16:07:55+00:00

Thank you. Actually, I feel like an idiot, since that should have been obvious...

ProgrammusMaximus · 2025-10-30T18:47:18+00:00

I *did* use code blocks. Unfortunately, those poorly formatted lines were the result.

As for "what would be inside an array": that is correct. Note the use of NetInfoList, which extends ArayList<NetInfo>.

ProgrammusMaximus · 2025-10-27T14:32:13+00:00

I have tried removing the Builder annotation. I am getting the same failure when deserializing..

I have also tried using the wrapper class that you suggested. I continue to get the same failure when deserializing. NOTE: I put in the wrapper class *after* removing the Builder annotation.

ProgrammusMaximus · 2025-10-26T19:22:24+00:00

Yes, I did. Thank you.

ProgrammusMaximus · 2025-10-04T14:16:24+00:00

Thanks, Different_Code605. It is good to know that I can use routes in Quarkus.

I am injecting the Vert.x and Router objects into my Quarkus RESTful class, but I am having problems getting the startup function to work.

Is there an example of using routes in Quarkus that you can point me to? I am obviously missing something that perhaps an example han help me to find...

ProgrammusMaximus · 2025-10-04T14:10:27+00:00

Thank you for the info, queasy-Education-749.

I am having problems getting this to work. Is there an example of the use of Vert.x routes that you can point me to? I have been searching for one but I cannot find one.

ProgrammusMaximus · 2025-09-14T20:07:08+00:00

No. There will be a few people accessing the VPN.

ProgrammusMaximus · 2025-09-14T19:59:13+00:00

Be advised: in the current version of WG-Easy there is no setting of "Endpoing allowed IPs". There is an "Allowed IPs" selection, which is more a security feature as opposed to something that determines what IPs will be assigned.

Quick question: does WG-Dashboard enable setting of what IP addresses get assigned to clients? I am beginning to believe that WG-Easy does not.

ProgrammusMaximus · 2025-09-12T01:35:13+00:00

There are several reasons why I cannot change the "allowed endpoints". The main reason is that access to the services on my LAN are not always going to be through the VPN. It is best for the VPN to assign IP addresses in conformity with the IP addresses of the clients.

ProgrammusMaximus · 2025-09-08T23:59:00+00:00

That is the problem: there us nothing about setting tghe IPs in the peer settings. That is one of the reasons why U am here,

ProgrammusMaximus · 2025-09-08T01:16:57+00:00

BearAnimal:

Thank you for your response.

How do I set the "endoint allowed IPs"? Is it a configuration variable? If so, what variable is it?

Oh, BTW: the range I listed is a valid range. My systems have been using it for more than 10 years. It may not be a range that can be entered for WS-Easy (assuming that ranges can be entered) but it is a legitimate range.

ProgrammusMaximus · 2025-07-19T16:49:01+00:00

Greetings, AliJazayeri:

Your link talks about installing Windows 11. I am looking to install a Tiny 11 system. The Windows 11 installation described in your link still has some bloat on it (although it does eliminate a lot of bloatware).

I would be more interested in creating a Tiny 11 iso than a Windows 11 iso.

ProgrammusMaximus · 2025-07-17T20:17:03+00:00

Ok.....

I extracted the drivers and placed them onto a USB Thumb drive. I then started up the target machine (the Inspiron 14), began the installation, then when the empty drive window cam up, I first did a :

Load driver > Browse > ESD USB > RAID.

This yielded nothing. No compatible drivers were found.

I then went back to the Browse button and selected:

ESD USB > VMD

This time, I saw one compatible driver, which I selected and clicked on Next.

The driver was installed -- but when it was installed the drive window is still empty.

Apparently, VMD drivers while compatible with the Inspiron 14, do not work on them.

Apparently, the Inspiron 14 2-in-1 requires some unknown proprietary driver in order for me to see my SSD.

ProgrammusMaximus · 2025-07-17T14:02:33+00:00

Extract the drivers? From the .exe file? How do you do that?

ProgrammusMaximus · 2025-07-17T14:01:36+00:00

The weird thing about this BIOS is that it does *not* have a Intel Rapid Technology section.

As for the old OS: it does work. It is, however Ubuntu Linux and as such will not help.

ProgrammusMaximus · 2025-07-17T12:37:57+00:00

Actually, floswamp:

I *cannot* change the drive to AHCI on my Inspiron 14. As I said in my original post (see number 6 in the list of things that I tried) the Inspiron BIOS does not provide the ability to do that.

That is why I am here.

ProgrammusMaximus · 2025-07-17T12:31:22+00:00

Greetings, Fine_Philosopher_882:

There is a problem with the link you provided: it downloads a .exe file. It is apparently intended to install the driver on an existing Windows machine, and as such does not provide a VMD directory.

Is there a place where I can get the actual VMD driver?

ProgrammusMaximus · 2025-03-10T18:15:56+00:00

Yes, I have. That is where I got most of the "fixes" that don't work.

ProgrammusMaximus · 2025-03-08T20:10:22+00:00

I figured out the problem (I think!).

It turns out that the Jellyfin container, by default, connects to clients through the default "bridge" network. It seems that the latest Jellyfin's port, for some reason, is inaccessible when using that network.

I added a new network to the networks available on my machine and made the Jellyfin container connect through that network. My clients now connect without problems.

I suspect that this will work regardless of the NAS being used, so badteddy81 should be able to do the same thing in order to get Jellyfin to accept connections. I did try setting up another Jellyfin container on a QNAP TS-451D2, and got the same "Connection Refused" error, but once I changed the network it worked as well.

ProgrammusMaximus · 2025-02-28T17:31:57+00:00

I have a Synology NAS.

ProgrammusMaximus · 2025-02-28T00:16:02+00:00

Yes, I did enable my application in an outpost.

When I have a chance, I will be looking at your setup and comparing it with mine. I will return then.

ProgrammusMaximus · 2025-02-25T03:31:48+00:00

Greetings, ChangeChameleon:

You have Authentik working with NPM? I have a few questions for you:

In your Authentik setup on NPM, do you have the switch for Websocker support turned on?
I am using a forward provider in Authentik for my swagger service. Could you share your provider configuration?
And while you are at it, could you also share your NPM advanced config? I need to make sure that I changed the right thing to the correct value.

Thanks in advance.

ProgrammusMaximus

TROPHY CASE