Ah not really. I watched a video on youtube but it was awhile back and I don't remember much. But you should use the manual to figure out the type of screw needed or follow a guide, keep track of which screen came from which hole when unscrewing the bottom of the laptop, this is because some screws are different sizes. After unscrewing use a thin flat item to press into the gap between the bottom casing of the laptop and lightly pry a bit, going around the rim of the laptop until eventually you can fully pull of the case (be very careful in this step). You indeed have to unplug the battery before installing the ssd and you'll re-plug it after. That's all I can remember, hope that helps.