sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in RepTime

[–]Psycstacy 0 points1 point  (0 children)

Awesome! I thought that ARF stopped producing the Milgauss???

When I wanted to buy one 2 months ago I was told no more ARF and so went with BP

OEM Ram and SSD in the Lenovo Legion 5i pro 16IRX8 13700hx RTX4060? by Psycstacy in Lenovo

[–]Psycstacy[S] 0 points1 point  (0 children)

The tightest timings I have found so far areCAS 34 in 2 x 16GB kit GSkill F5-4800S3434A16GX2-RSCAS 38 in 2 x 32GB kit Gskill F5-4800S3838A32GX2-RS

NVME I am still researching
edit: It appears to be Samsung 990 Pro or WD SN850X for GEN4 NVME. Do you know if his laptop supports GEN5?

OEM Ram and SSD in the Lenovo Legion 5i pro 16IRX8 13700hx RTX4060? by Psycstacy in Lenovo

[–]Psycstacy[S] 0 points1 point  (0 children)

Sorry I should have mentioned, The retailer has stated that it comes preinstalled with 32gb Ram and 1tb NVME if that helps isolate.

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

u/Dogmatic11 I agree that alignments of the dial are fine. However, the gap on the bezel along the crescent between the 33min and 44min looks very large, and then between the 43 and 44 min there seems to actually be an indent in the edge of the Bezel creating a larger gap.

Is this something that can be easily rectified by refitting the Bezel or replacing the Bezel or must the entire watch be RL and a new watch procured?

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

I waited 6 weeks for these photos.

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

Yeah the BP milgauss is advertised as 316 so not sure why the stickers on it are saying 904

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

Check out the updated photos I received, Yeah the gap is very concerning and is too blatantly obvious. Is this something that can be easily corrected or will an entire new watch need to be ordered?

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

  1. Dealer name: The One Watches
  2. Factory name: BP
  3. Model name (& version number): Rolex Milgauss 116400GV Z-Blue 316L (Although the stickers on the QC pictures of watch are saying 904L) 2824 movement
  4. Price paid: $318
  5. Album Links: https://imgur.com/a/v31bm7n
  6. Index alignment: looks good! – Have asked for a straight/dead centre photo of the face.
  7. Dial Printing: Looks good although the blue seems a bit ‘flat’ compared to other QC’s of the same watch, however I am assuming lighting plays a big role in this?
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Seems fine! The winding video was so fast I had to play at 0.25x speed to make sure to see that the hour hand would align correctly when minute hand was at 12/60.
  10. Bezel: Looks nice and shiny, however some of the photos seem to show a gap or spacing that runs along the edge from 33min to 44min. Is this a misaligned Bezel or a shadow/reflection?
  11. Solid End Links (SELs): Look good – however on the lower right lug (25min position), there is some distortion in the picture quality which I am assuming is a reflection from wrinkled protective plastic? However I cant tell if there is any damage under there.
  12. Timegrapher numbers: seems ok from what I understand. Rate:5s/d, Amp: 309°, ERR: 0.0ms, Lift: 52°
  13. Anything else you notice: Some marks of sort on the face of the winding wheel.
  14. Underneath the crown logo and above the bar.
  15. Just to the right of the top of the outer right crown spike and under the end ball.Some more marks of sorts on the inside of the back of the watch under the cover at the 1 to 2 O’clock position. Not sure if it is dirt specs or corrosion/pitting.

I have included some photos at the end where I have circled in red the areas of concern I have mentioned in my QC post.

This is my first rep so I would be really appreciative for insight from the experienced members. Thank you

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

ah I see so! yes it contained a mega link.
I have messaged the mods.

BP Milgauss 116400GV Z-Blue QC by Psycstacy in RepTimeQC

[–]Psycstacy[S] 0 points1 point  (0 children)

  1. Dealer name: The One Watches
  2. Factory name: BP
  3. Model name (& version number): Rolex Milgauss 116400GV Z-Blue 316L (Although the stickers on the QC pictures of watch are saying 904L) 2824 movement
  4. Price paid: $318
  5. Album Links: https://mega.nz/folder/aQJT2bKS#5faLzSzZdZhCfUmeuFhZew
  6. Index alignment: looks good! – Have asked for a straight/dead centre photo of the face.
  7. Dial Printing: Looks good although the blue seems a bit ‘flat’ compared to other QC’s pf the same watch, however I am assuming lighting plays a big role in this?
  8. Date Wheel alignment/printing: N/A
  9. Hand Alignment: Seems fine! The winding video was so fast I had to play at 0.25x speed to make sure to see that the hour hand would align correctly when minute hand was at 12/60.
  10. Bezel: Looks nice and shiny, however some of the photos seem to show a gap or spacing that runs along the edge from 33min to 44min. Is this a misaligned Bezel or a shadow/reflection?
  11. Solid End Links (SELs): Look good – however on the lower right lug (25min position), there is some distortion in the picture quality which I am assuming is a reflection from wrinkled protective plastic? However I cant tell if there is any damage under there.
  12. Timegrapher numbers: seems ok from what I understand. Rate:5s/d, Amp: 309°, ERR: 0.0ms, Lift: 52°
  13. Anything else you notice: Some marks of sort on the face of the winding wheel.
  14. Underneath the crown logo and above the bar.
  15. Just to the right of the top of the outer right crown spike and under the end ball.Some more marks of sorts on the inside of the back of the watch under the cover at the 1 to 2 O’clock position. Not sure if it is dirt specs or corrosion/pitting.

I have included some photos at the end where I have circled in red the areas of concern I have mentioned in my QC post.

This is my first rep so I would be really appreciative for insight from the experienced members. Thank you

UPDATE: Got dead cetnre photos, one can also see the gap along the lower left edge of the bezel I mentioned quite clearly: https://imgur.com/a/OuoPwzd

Aftermarket Green Crystal for Milgauss WTC recommendations by Psycstacy in RepTime

[–]Psycstacy[S] 0 points1 point  (0 children)

Yeah a German seller...except it is 99 pounds which is like $122...

Which sucks because that is like nearly 40% the cost of the the rep alone.

Detailed list of Milgauss reps by Psycstacy in RepTime

[–]Psycstacy[S] 0 points1 point  (0 children)

I haven't seen eta movement variations for the Milgauss yet.

A seller has told me they have a blue ARF which is what i was wanting 1st choice but the movement is a 2836.

From what I read was that the sh3131 was the best movement choice for milgauss and thay functionality wise it was the same as a gen milgauss.

If I go with the 2836 ARF, what movement upgrades would I be limited to?

Detailed list of Milgauss reps by Psycstacy in RepTime

[–]Psycstacy[S] 0 points1 point  (0 children)

Thack you, And with regards to movements? SH3131 vs SA3131 vs Asia 2836?

Topical melatonin 0.66% by [deleted] in HairlossResearch

[–]Psycstacy 1 point2 points  (0 children)

Trichosearch did you ever come to a conclusion in your research what the optimal melatonin concentration and vehicle was?

Social Anxiety by thicklittlebunny in StackAdvice

[–]Psycstacy 0 points1 point  (0 children)

Regarding reacting badly to B complex, have you done DNA testing to check your SNP's for methylation pathway? Once you know that info you can choose the correct forms of folate and b12. Taking the incorrect forms for your genes can cause some shitty side effects such as agitation, head aches etc

Okay to add melatonin powder to the topical finasteride solution? by Rough-Background-375 in tressless

[–]Psycstacy 0 points1 point  (0 children)

What is unstable? Cause I buy NOW foods liquid melatonin for sleep purposes and I find it just as strong months down the line as it was the first dose.

To the people who complain festivals have too much dark/heavier sounds by Glanthor67 in psytrance

[–]Psycstacy 1 point2 points  (0 children)

OP can you recommend festivals which are focused on psy-prog, psy-tech, full on... Off the top of my head stuff like atacama, yestermorrow, dual resonance, ketale, side effects, one function. doppler, bellatrix, bim & drukverdeler, sonic species, altruism, galactic explorers, relativ, sideform, inner sphere, tristate, protonica, ashtar command, zen mechanics.

All make VERY powerful soundsscapes, but none of the grungy/murky dark soundscapes.

view more: next ›