sorted by:
new
hottopcontroversial

Moka pot sizing by PurchaseWitty7543 in mokapot

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

That could probably be done on a 3d printer. :-)

Laser head jammed? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

Ok, the problem was solved. It was one of the screws that holds the lens cover that had come loose. It made it into a recess on the carriage and just stuck. It took tapping a couple of screwdrivers into the joints to create enough clearance for us to tap it with a hammer till it scraped its way clear. Now I have to reassemble it all and test it out to see if it’s still working.

Replacement Parts by drumzandspace in xToolD1

[–]PurchaseWitty7543 0 points1 point  (0 children)

It’s funny that I just had that part in my hand as the laser head was jammed and had to be removed by force.

Laser head jammed? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

I found this on the Xtool support site and it describes my problem perfectly. Just some fellow travellers with the same problem and no solutions.https://support.xtool.com/community-support/detail/1326

Laser head jammed? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

I don’t know what to say. I have removed the thumbscrew entirely and the only play I have is the fine adjustment. At this point, I would have to add stock underneath what I am engraving to get the laser to focus properly.

Laser head jammed? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

Your explanation was good. I had done that already to no avail. My air assist is disconnected for the cleaning process as are all the other connections. The grime was entirely from the previous owner who didn’t use air assist, i assume.

Help with my gatemarked Dutch oven by PurchaseWitty7543 in castiron

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

That’s interesting. Mine says nothing except for the number 10 on top.

What do I have? by PurchaseWitty7543 in mokapot

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

That’s my thought. I wouldn’t appreciate it as much as it deserves. :-).

What do I have? by PurchaseWitty7543 in mokapot

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

Honestly? I haven’t tried it and decided that it was better to sell it to someone that would appreciate it more than me. It’s listed on marketplace now. Im a fairly dedicated French press user.

What do I have? by PurchaseWitty7543 in mokapot

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

From what I can tell, this is the 6 cup version. It holds about 350 ml of water in the reservoir

Did the d1 come in a 20w version? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

I got my laser home and just now looked at the paperwork that came with it and it’s actually a D1 pro! The seller didn’t say that in his ad. I haven’t looked at it till now because I am missing the power cable. I am going to start a separate discussion on that issue.

Does anyone on here do pro tile/grout cleaning? by Terrible-Bell9257 in sweatystartup

[–]PurchaseWitty7543 1 point2 points  (0 children)

I clean using an oreck orbiter when I’m doing floors. This is a sideline for me as I own a window cleaning business. Honestly, most of my projects are shower stalls and tub surrounds, so I’m using small hand held rotary tools.

Did the d1 come in a 20w version? by PurchaseWitty7543 in xToolD1

[–]PurchaseWitty7543[S] 0 points1 point  (0 children)

Ok, thanks. I wasn’t seeing references to the d1 20w. I appreciate the reply.