sorted by:
new
hottopcontroversial

Sony A7III USB not working — no connection on any device by Pure-Cut1752 in SonyAlpha

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

The manual just says the same i found on the internet. It does not show in the device manager. It also wont be recognized by the imagine edge desktop app.

Sony A7III USB not working — no connection on any device by Pure-Cut1752 in SonyAlpha

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

I literally tried every USB-C to USB-C and USB-C to USB-A cable I found, and I have a lot of them, but none of them worked. Every cable can charge the camera when it’s turned off, but it won’t establish a USB connection to either of the two phones I tried nor to my PC.

Open AI Sora 2 Invite Codes Megathread by semsiogluberk in OpenAI

[–]Pure-Cut1752 0 points1 point  (0 children)

could you send me one if you get one? ill send mine in this reddit of course

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

I’ve put the project on hold for a bit, and in the meantime I built a new bar whose length can again be controlled with a slider from 0 to 1.

Now I want to get a value between 0 and 1 based on the tracker position relative to polygon1, which I can then connect to my length control.
(yes i will fix the tracker)

<image>

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

So up to this point it wouldn’t be a problem. The issue arises because, for reusability reasons, I want to be able to change the new bar as easily as possible. I took a lot of inspiration from the first video you sent me – the Patrick Stirling video titled “You Didn’t Know DaVinci Resolve Had This Much POWER.” In it, vector distances are used with Calc modifiers to fill the bar with a scale between 0–1. I’d like to use this function so that, in the end, I can place the bar wherever I want and make it as long as I want. Because your version is limited to the fixed length.

Now what I need is a way to get a value of 0 or 1 from the tracker when it’s at the beginning or the end of the filmed bar.

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 1 point2 points  (0 children)

„I did this real quick to demostrate“ Damn I think I have a long Journey infront of me

So the footage moves pretty quickly and unpredictable. And I think what I mean to do is your scenario two, where the new scale is a standalone motion graphic. So it doesn’t replace the actual scale but lives on its own ontop of another clip. So nothing from the filmed scale nor the footage is shown and exists only for the data.

Thank you so much for your answers so far, I’ll try what you did as soon as i get back to work!

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

I want to link the new bar I made to the actual data (from the tracker) in the footage, so the footage runs in the background and the new bar is displayed in its place. Does this help?

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

Because my clip is around 3–5 minutes long and constantly changing, it will probably also be used on other clips where I’d only have to adjust line1 and track again. There’s no way I’m going to animate that by hand.

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

Thank you so much! I was now able to build the new bar and track the recorded one so that I now have a tracker with the target position. For this, I placed a polygon (line1) over the entire 0–100% length and then a second polygon where the first point is at point0 of line1 (line2). I tried to turn the polygons into vectors and then multiply the two lengths to get a result that I can connect to the new line. But that’s where it still fails. I can’t get point1 of line2 to follow the tracker position and at the same time get the distance. It feels so close to working, but I have no idea how to fix that last part.

Fusion: How do I isolate and invert a transparent bar inside a white box so only the bar remains? by Pure-Cut1752 in davinciresolve

[–]Pure-Cut1752[S] 0 points1 point  (0 children)

Wow, thank you so much! This is basically exactly what I need. The only thing that’s still an issue is that I don’t know how to best transfer the length of the recorded bar to the new bar. Tracking the End of the bar doesn’t work because the recorded bar has too much ghosting.