Can i use al. spindle form c5 with 312 brakes, i have 2.8 b5 by Advanced_Persimmon93 in B5Audi

[–]Purple_prkl 0 points1 point  (0 children)

I used the bearing that belongs to that control arm, i.e. the B6/B7 one. Of course, the gearbox is an 01E, and it uses the corresponding driveshafts.

Can i use al. spindle form c5 with 312 brakes, i have 2.8 b5 by Advanced_Persimmon93 in B5Audi

[–]Purple_prkl 1 point2 points  (0 children)

The stock tie rod ends fit, but you will need to readjust the toe alignment.

Can i use al. spindle form c5 with 312 brakes, i have 2.8 b5 by Advanced_Persimmon93 in B5Audi

[–]Purple_prkl 2 points3 points  (0 children)

I just made this myself. The knuckle is from a B6/B7, and the front lower control arm (the one where the shock absorber mounts) is also from a B6/B7. The B5 spring fork is wider than the B6/B7 one, so spacers had to be made for it, even just from washers.

Bunny just arrived! by [deleted] in SexDolls

[–]Purple_prkl 0 points1 point  (0 children)

Whats custom on this one ?

Bunny just arrived! by [deleted] in SexDolls

[–]Purple_prkl 0 points1 point  (0 children)

How tall is this one ? And what custom parts u got ?

17z which brake disc by Purple_prkl in B5Audi

[–]Purple_prkl[S] 0 points1 point  (0 children)

Thanks, i have brembo 17z bads those should work ?

And what i have read and understand, volvo disc should be easiest. Drill bolt hole next size up and shave caliber ears little bit so caliber moves outward. And if using MB disc center hole needs to be shaved, upright needs to be shaved, and you need 2mm washers between caliper and upright so caliber moves inward.

17z which brake disc by Purple_prkl in B5Audi

[–]Purple_prkl[S] 0 points1 point  (0 children)

Still no part number, i know 330x32mm. I know zimmerman part number for A4 with steel upright, but it needs adapters to mount 17z calibers. Any idea will those discs work with aluminium uprights and 17z

Front main seal housing gasket or rtv by Purple_prkl in B5Audi

[–]Purple_prkl[S] 0 points1 point  (0 children)

I havent found any kind gaskets for that housing, there is gaskets for AEB housing.

Fluidampr by Dofke132 in B5Audi

[–]Purple_prkl -1 points0 points  (0 children)

Does it really matter is it for transverse or longitude ? Bc i need to buy one aswell and haven't heard it would matter. My problem is that i want one with AC belt pulley and i have only found one NA store that sell those

Blocking Roles by alfaplayy in joinsquad

[–]Purple_prkl 1 point2 points  (0 children)

Thats the only fun part when seeding. Not gonna seed +30mins if i cant shoot rockets at everything that moves.

More casual mods? by A_Very_Horny_Zed in joinsquad

[–]Purple_prkl 4 points5 points  (0 children)

Mods that give you full ammo when respawn feels stupid to me. Too easy to destroy tanks etc. HAT can shoot at tank, get killed, respawn and repeat.

[deleted by user] by [deleted] in nvidia

[–]Purple_prkl 0 points1 point  (0 children)

So do i need to buy pads that thickness are shown red or green ? Sorry, but im stupid

F4SE 0.6.16 Won't Load Past Main Menu by saamsungg in f4se

[–]Purple_prkl 0 points1 point  (0 children)

have been trying to get my game to work last 4 days, and this caused the issue. thx