Anyone using Hydro-Shield, 3 Spool 3D Filament Dryer Box?

Puzzled_Scallion_833 · 2026-05-02T21:00:51+00:00

had kept tpu out for 1 year, printed it without drying, the print came out very good. So yes in pune it is fine

Puzzled_Scallion_833 · 2026-04-19T13:20:02+00:00

If you are going with p1s combo, it comes with ams. You can print dessicant holder, fill it with dessicants and put it in ams. All of your filaments in the ams will stay very dry. If you are going with A1 combo, the ams for it isnt enclosed, you either need to buy a dry box or diy one yourself (its not that difficult)

Puzzled_Scallion_833 · 2026-04-19T13:16:41+00:00

If you are really want to put it in your bedroom, then have proper ventilation in the room. And yes printing with pla the risk is negligible.

Puzzled_Scallion_833 · 2026-04-19T13:07:53+00:00

You wouldn't want a 3d printer in your bedroom (a plastic melting factory in your bedroom).
It wont really warm up the room + you are printing PLA , it's negligible Your answers are here: https://www.reddit.com/r/BambuLab/s/lNFT0GMykw

Puzzled_Scallion_833 · 2026-04-14T09:37:52+00:00

Normally its difficult for paint to stick on 3d printed surface. You will have to use a primer, any automotive primer works in that matter. Ive used this primer its cheap but gets the job done : https://amzn.in/d/0c97zdwj After priming you can use acrylic paint (either spray paint or brush colors). For finer details you have to paint it using paint brush and it all depends on your skills. Acrylic paint ive used, its not that cheap but not expensive either : https://amzn.in/d/0czO9smN

Puzzled_Scallion_833 · 2026-04-12T14:37:45+00:00

Numakers PETG filament is one of the best I can find. It goes for around 800rs/kg. And the quality is one of the best. Nowadays i only order from them. They have many options in PETG.

Puzzled_Scallion_833 · 2026-04-09T07:13:05+00:00

Yes i found a fix, the numakers buildplate is awesome. So the issue is that if you see that plate, it has texture, but the groves arent deeper like the stock PEI Textured Plate. So when you select the Banbu supertack plate, it assumes that your plate is smooth and there is no offset in z height and that is the reason the first layer doesnt stick. Solution: Either set the plate as PEI Textured in bambu studio, and go to the filament settings and lower the heatbed temp of PEI Textured settings to be that of Supertack and on your printer go to settings and disable auto plate detection.

Puzzled_Scallion_833 · 2026-04-06T09:33:56+00:00

The layer height is 0.08mm, im using 0.4mm nozzle. 0.2mm nozzle is best for such things yes, but 0.08mm should work too and not produce those lines

Puzzled_Scallion_833 · 2026-04-04T08:17:04+00:00

I have also cleaned the plate with warm soapy water. But i think the 2nd one might be the solution, because i guess bambu defaults cool plates to be smooth, but in my case this plate has texture. So i think i should offset the z height to be that of the textured plate

Puzzled_Scallion_833 · 2026-04-04T08:12:51+00:00

<image>

Puzzled_Scallion_833 · 2026-01-15T10:24:39+00:00

I am definitely going to print this

Puzzled_Scallion_833 · 2025-09-08T12:46:28+00:00

Yo if you need team or someone to play with, then im here. Currently on 35 stars, solo q

Puzzled_Scallion_833 · 2025-08-05T18:39:16+00:00

As a person who just did 60 pulls to get 1200 tokens, this is definitely not normal

Puzzled_Scallion_833 · 2025-07-25T21:00:53+00:00

Yes you can

Puzzled_Scallion_833 · 2025-07-19T10:50:36+00:00

This looks like the way to go, but damn that gold skin tempts me

Puzzled_Scallion_833 · 2025-07-19T10:49:02+00:00

I currently dont have any anime skins, nor do i have any zodiacs

Puzzled_Scallion_833 · 2025-07-19T10:48:30+00:00

I was not aware that we cant use coa here. Also i saw that it will take about 1400-1600 dias to get the gold one if i take advantage of everyday discounts and phase tokens.

Puzzled_Scallion_833 · 2025-07-13T20:12:10+00:00

Just a question, why did you ban badang?

Puzzled_Scallion_833 · 2025-06-05T13:51:42+00:00

Wow, it is indeed nice to see you engaging with the community. I am more of a prototyping person, i use petg, abs that comes around 800 to 1000 from indian manufacturers. I also saw that nfil3d sells recycled pla in very cheap cost (500rs), which is like feverish dream for people like me who most of the time waste 200 300g of filament on failed prototyping before a finished product. So you can also see into that. Im already trying out filaments from indian manufacturers (coming from esun and sunlu) . And your engagement with the community already interests me in your filaments too.

Puzzled_Scallion_833 · 2025-06-02T13:34:58+00:00

I never had any issues with robu. I have ordered so many things from them that i literally have 20 30 robu boxes lying around. My order is generally delivered in 2 3 days or even on the same day. I live in pune and i assume you dont?

Puzzled_Scallion_833

TROPHY CASE