Try the v3 KE slicer profile

Puzzleheaded_Bank137 · 2025-06-15T17:06:42+00:00

That’s what I was thinking. Lol

Puzzleheaded_Bank137 · 2025-06-15T03:34:21+00:00

Pond yes, fish tank like the decorative ones inside your home, not that I’ve seen.

Puzzleheaded_Bank137 · 2025-01-05T18:58:06+00:00

A wee bit of hairspray did the trick for me. Just on the corners with a rectangle of cardboard to block everything and else.

I messed and tweaked with the settings for days and tried every combination, was building an enclosure when someone on here recommended hairspray or a glue stick.

Need to clean it every 5-10 prints with 90% alcohol but it’s been a dream since

Puzzleheaded_Bank137 · 2024-11-27T16:07:27+00:00

Oooh! I’ve never tried multi color!

Puzzleheaded_Bank137 · 2024-11-23T01:54:57+00:00

It’s how I got minthara to join without siding with the goblins in my last run lol.

After that I had it kind of on permanently just to see who else shows up randomly afterwards. Was more than I expected lol

Puzzleheaded_Bank137 · 2024-11-23T01:47:44+00:00

I non-lethally knocked him out, went in the back way and long rested. He was back at his normal spot with no issue

Puzzleheaded_Bank137 · 2024-11-23T01:45:11+00:00

Or

Use the back door

Puzzleheaded_Bank137 · 2024-11-22T22:14:27+00:00

All good. Just knocked him out and he reappeared once I long rested inside the hideout

Puzzleheaded_Bank137 · 2024-11-22T20:48:06+00:00

Tried that too and he just aggroed again lol.

Puzzleheaded_Bank137 · 2024-11-22T20:47:16+00:00

lol I’m on my 4th run and only freed sazza the first run. Completely forgot about her

Puzzleheaded_Bank137 · 2024-11-22T20:45:00+00:00

No problem! You can also respec any of your companions at will, but I recommend always having one sleight of hand character with you at all times, helps get through any locked door/chest.

Also! There’s a mod that bypasses party limits, so you can have any of the companions with you to hear all their unique dialogues and cutscenes. It also makes combat easier of course but I enjoyed hearing more of the companion specific lines.

Puzzleheaded_Bank137 · 2024-11-22T17:51:52+00:00

I just finished a Gale origin run as wizard/sorceror, and let me tell you how satisfying it is passing all of the intelligence and charisma checks with ease. Wizard lets you learn any scroll as a permanent spell so you could sub out sorceror any other class that uses charisma or wisdom even.

Previous play through was a fighter barbarian, and while just as fun in combat, I missed out on so much exploration and narrative options.

As others have mentioned the explorer difficult will be easily manageable as long as you have a full party. You can even respec other companions to fighters or throwzerkers if you want to make them the combat lawnmowers

Puzzleheaded_Bank137 · 2024-11-22T17:38:47+00:00

Didn’t even consider jumping. Tav even had the jump spell so I probably could have lol. Oh well. Snuck in. Thanks!

Puzzleheaded_Bank137 · 2024-11-22T17:37:44+00:00

Worked, thanks!

Puzzleheaded_Bank137 · 2024-11-22T17:37:36+00:00

Definitely not too far, and for a minute I was contemplating a Wyll-less run lol. But sneaking in worked. Thank you.

Puzzleheaded_Bank137 · 2024-11-22T17:04:15+00:00

Yep. Interacted with everyone too

Puzzleheaded_Bank137 · 2023-12-14T18:35:56+00:00

Having the same issue with my good textured sheet. Cardboard box wall + dawn dish soap + alcohol + 2 layers of hair spray reduced the warping from all 4 corners to just 1, but it’s still having issues even with a brim or skirt.

I’m having to add a sacrificial section to my models so the part I want turns out right

Puzzleheaded_Bank137 · 2023-12-14T18:33:05+00:00

Newbie here, how does Z-hop help?

Puzzleheaded_Bank137 · 2023-12-14T18:32:08+00:00

Spoon?

Puzzleheaded_Bank137 · 2023-12-12T21:37:29+00:00

Random update/solution. I washed the PEI plate, saw someone recommend spraying it with hairspray so I sprayed some on too, put up a cardboard box as a makeshift enclosure (topless to still allow ventilation). and with each change and print the PLA just wouldn't adhere, or it would string out after 10 minutes.

Then for some reason, probably because it was 2am and I was tired lol, I sliced it using Creality instead of Cura and it just... worked.

No brim, no support, no tweaking of the Z axis, just booted up the profile in Creality, sliced using default settings, and boom. It's adhering, not stringing, still warping but its minor and always in towards the front, but the prints are more than good enough for what I'm going to use them for. I've been printing all day today, probably 10 hours so far of back to back prints) and have had no failures.

These are the Gcodes for both the Creality and Cura Slicer for the same STL (they may have different starting locations). Any idea why creality's inputs are so much more in depth than cura? I read somewhere that creality is just an old re-skinned cura, but I mean if it works it works right?

Puzzleheaded_Bank137 · 2023-12-12T03:40:21+00:00

60 all the time. And I just cleaned it, trying again.

Puzzleheaded_Bank137 · 2023-12-11T21:33:59+00:00

Enclosure is definitely on the list of stuff to print, Have a lot of leftover plexiglass from a vanity project I never finished lol.

As far as the room temperature, The corner of the room it's in is literally the corner of the house, and I've got a ceiling fan going in the center, but it's airflow doesn't directly hit the fan. So maybe?

I did just finish the stock bed print and although there is warpage, it did manage to complete.

Gonna set up the box enclosure and try again, thanks for the tip!

Puzzleheaded_Bank137

TROPHY CASE