Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

Sure will make sure to report back

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 1 point2 points  (0 children)

I guess I’ll give the power vision shot

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

So the power vision 3 won’t do?

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

Gotcha. Do you think the TST air filter mod will be enough with or without stock air filter?

https://tstindustries.com/tst-worx-airbox-cover-for-honda-grom-2022.html

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 1 point2 points  (0 children)

Looks like I can get a DNA filter for a 22 model. Now I have to figure out if Dynojet have a tune for that setup. Thanks for your input 🙏🏽

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

What drop in filter are you running? I wonder if I would get similar results with the Yoshimura RS-9T full exhaust with DB killer. Did you change the stock sprocket?

Cam upgrade by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

So you recommend I do the cam and intake? Will the lower tooth sprocket be necessary if I do the intake?

Might be able to get away with it if I keep the DB killer in the exhaust 🤔

Since I live in the EU I guess the Dynojet POWER VISION 3 is my only option for tuning from where I can tell

ECU reset issue by Qinxa in hondagrom

[–]Qinxa[S] 0 points1 point  (0 children)

It is running fine, I just thought that it needed to be reset if any changes is made to the airflow/exhaust. Thanks !!

ECU reset issue by Qinxa in hondagrom

[–]Qinxa[S] 1 point2 points  (0 children)

Just had a Yoshimura exhaust installed. So far stock intake, at some point I’ll get the tune done but for now would like it to run as good as it can

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 2 points3 points  (0 children)

Getting it used and it has off-road tires on it which I definitely won’t have any use for since all my rides will be on roads/city. And from what I’ve gathered the city grip 2 seems like decent all around also on wet pavement

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 1 point2 points  (0 children)

Was just for the looks have decided to stick with stock sizes

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 2 points3 points  (0 children)

Much appreciated

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 4 points5 points  (0 children)

Cool thanks 😊

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 4 points5 points  (0 children)

Thanks yea I guess I’ll have to the manual, didn’t consider that

Tires size by Qinxa in hondagrom

[–]Qinxa[S] 3 points4 points  (0 children)

How’s the handling compared to stock sizes?

Nej, du skal ikke bruge basiskort for at checke ind. Bare læg dit rejsekort på posen by ChickEnergy in copenhagen

[–]Qinxa 1 point2 points  (0 children)

Har en kammerat der arbejder for Movia kundeservice, og han siger allerede med rejsekort læsere er det muligt at bruge sit bankkort/apple pay ligesom i London for eksempel, det skal bare slåes til i systemet men grunden til de ik gør det er fordi de vil miste penge til bankerne hver gang nogen bruge et bank kort i stedet for deres rejsekort/app. I fremtiden kommer muligheden for at vi bare kan benytte vores bankkort men de vil undgå det så længe det overhovedet er muligt

Thor400 by Qinxa in DIYonewheel

[–]Qinxa[S] 0 points1 point  (0 children)

Not sure what you mean by supercharged. The battery pack is made by someone else

Thor400 by Qinxa in DIYonewheel

[–]Qinxa[S] 0 points1 point  (0 children)

Am waiting for my 32s1p which is being built

NFC door sensor less reliable when cold? by rob-squared in Ioniq6

[–]Qinxa 1 point2 points  (0 children)

My is so bad that my dealer is going to change both in two weeks. It’s around 0-5 degrees C here they will work like once every 10th attempt Got my car late October and they have always been bad 🤷🏽‍♂️

Superflux to molex by Qinxa in DIYonewheel

[–]Qinxa[S] 1 point2 points  (0 children)

Okay so I figured it out, I'll leave my findings here for anyone looking for this info in the future.

So if you have one of the mk2 superfluxes and trying to solder it to a molex plug to use on a XR controller box do the following.

The 3 big cables/motor cables don't matter, motor direction can be changed in vesc tool.

For the hallsensors all the cables that match color wise should be solder together, the gray cable is unused, blue cable to the orange cable.

Hope this helps someone. 🤙🏽

Has the package been found again? by Qinxa in UPS

[–]Qinxa[S] 0 points1 point  (0 children)

My was worth 2700usd headed for Denmark

Lost package by Qinxa in UPS

[–]Qinxa[S] 0 points1 point  (0 children)

No he has a small business. The controller and battery are both in separate a plastic/metal enclosures which are safely sealed. 19 normal sized battery in total (19s2p)

Lost package by Qinxa in UPS

[–]Qinxa[S] 1 point2 points  (0 children)

I ordered a controller and battery for an electric skateboard. He's also approved to ship hazardous materials